(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Acrylic Plates / Cast Plates

Acrylic Plates / Cast Plates

[Standard large quantity available] For standard sizes and hole-machined types from 21 to 100 pieces, a 15% discount is available without the need for an estimate. [Standard large quantity available] For side milling cutters of 11 to 20 pieces, a 5% discount is available without the need for an estimate.

Acrylic (Resin) Plates:Related Image

Type[ M ]GradeColorLight TransmittanceOperating Ambient Temperature
ACAStandardTransparent93%-30~80°C
ACBAStandardSmoke Brown25%
ACDAStandardOrange43%
ACTAAntistaticTransparent79%
ACBTAAntistaticSmoke Brown32%

Specifications

■Standard Size
Part Number-A-B-T
ACTA-955-825-3
■Large Size
Part Number-A-B-T
L-ACA-1500-800-5
■4-side Milling
Part Number-A-B-T
ACA4FQ-300-200-15
■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
ACA6H
ACA6H
-
-
800
800
-
-
400
400
-
-
3
8
-
-
F250
F250
-
-
G355
G300
-
-
N3
M4

-

L6
■Standard Type
Part NumberABT
MaterialFinishA, B Dimension Tolerance
Standard SizeCircular Sawing1mm IncrementSelection
ACA (Standard, Transparent)-Not available20~120020~10003, 4, 5, 6, 8, 10
20~80020~60015, 20, 25
ACBA (Standard, Smoke Brown)20~120020~10003, 4, 5, 6, 8, 10
ACDA (Standard, Orange)
ACTA (Antistatic, Transparent)
ACBTA (Antistatic, Smoke Brown)
3, 5
Large Size1201~200020~10003, 5
L-ACA (Standard, Transparent)
L-ACBA (Standard, Smoke Brown)
L-ACTA (Antistatic, Transparent)
L-ACBTA (Antistatic, Smoke Brown)
4-side Milling4-side Milling0.1mm IncrementSelection
ACA (Standard, Transparent)4FQ (0~+0.2)
N (±0.1)
M (-0.2~0)
10~40010~2005, 6, 8, 10, 15, 20, 25
ACBA (Standard, Smoke Brown)5, 6, 8, 10
ACDA (Standard, Orange)
ACTA (Antistatic, Transparent)
ACBTA (Antistatic, Smoke Brown)
5
[ ! ]For T0.5~2.0, see P.973.
• T Dimension Tolerance
TT Dimension Tolerance
3±0.5
4, 5±0.6
6±0.8
8±0.9
10±1.1
15±1.5
20±2.0
25±2.5
• Dimension Tolerance of A and B ±1.0
■ Pre-drilled Type
Material CodeNumber of HolesABTFGScrew Nominal Dia.
Through HoleCountersinkKeyholeThreaded Insert
1mm IncrementACAACBAACDA
ACTA
ACBTA
0.5mm IncrementNPQML
ACA (Standard, Transparent)
ACBA
(Standard, Smoke Brown)
ACDA
(Standard, Orange)
ACTA
(Antistatic, Transparent)
ACBTA
(Antistatic, Smoke Brown)
2H
(Horizontal)
2HL
(Vertical)
4H
6H
8H
20~120020~10003336~1191.5
(2H, 4H)
4.5~1195.5
(2HL)
6~595.5
(6H, 8H)
4.5~995.5
(2H)
6~991.5
(2HL, 4H, 6H)
6~495.5
(8H)
3
4
5
6
8
10
3     5
6
8
-Select from Table 1
44-345   3     
5553456  34    
66- 456   45   
88- 4568  456  
1010- 456810 4568 
ACA
(Standard, Transparent)
20~80020~60015--6~791.5
(2H, 4H)
4.5~795.5
(2HL)
6~395.5
(6H, 8H)
4.5~595.5
(2H)
6~591.5
(2HL, 4H, 6H)
6~295.5
(8H)
  56810  56810
20--  56810  56810
25--  56810  56810
[ ! ]Dimension F Specification Range For 2H and 4H: d(d1)+2.5≤F≤A-d(d1)-5; for 2HL: d(d1)/2+2.5≤F≤A-d(d1)/2-2.5;
for 6H and 8H: d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range For 2H: d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H: d(d1)+2.5≤G≤B-d(d1)-5;
for 8H: d(d1)+2.5≤G≤(B-d(d1)-5)/2. (d for through hole, d1 for countersink.)

Alterations

Acrylic (Resin) Plates:Related Image
Acrylic (Resin) Plates:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
ACA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,​4,​5,​6,​8,​10]
ACA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,​6,​8]
ACA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,​4,​5,​6,​8,​10]
ACA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACA4FM-[10-400/0.1]-[10-200/0.1]-[5,​6,​8,​10,​15,​20,​25]
ACA4FN-[10-400/0.1]-[10-200/0.1]-[5,​6,​8,​10,​15,​20,​25]
ACA4FQ-[10-400/0.1]-[10-200/0.1]-[5,​6,​8,​10,​15,​20,​25]
ACA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,​4,​5,​6,​8,​10]
ACA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,​4,​5,​6,​8,​10]
ACA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,​4,​5,​6,​8,​10]
ACA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,​6,​8]
ACA-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10,​15,​20,​25]
ACBA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,​4,​5,​6,​8]
ACBA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACBA2H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,​6,​8]
ACBA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,​4,​5,​6,​8]
ACBA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6,​8]
ACBA2HL-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACBA4FM-[10-400/0.1]-[10-200/0.1]-[5,​6,​8,​10]
ACBA4FN-[10-400/0.1]-[10-200/0.1]-[5,​6,​8,​10]
ACBA4FQ-[10-400/0.1]-[10-200/0.1]-[5,​6,​8,​10]
ACBA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,​4,​5,​6,​8]
ACBA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACBA4H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACBA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,​4,​5,​6,​8]
ACBA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACBA6H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACBA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,​4,​5,​6,​8]
ACBA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,​4,​5,​6,​8,​10]
ACBA8H-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,​6,​8]
ACBA-[20-1200/1]-[20-1000/1]-[4,​5,​6,​8,​10]
ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,​4]
ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,​4,​5,​6]
ACBTA2H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,​6,​8]
ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,​4]
ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,​4,​5,​6,​8,​10]
ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,​4,​5,​6]
ACBTA2HL-[20-1200/1]-[20-1000/1]-5-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,​6,​8]
ACBTA4FM-[10-400/0.1]-[10-200/0.1]-5
ACBTA4FN-[10-400/0.1]-[10-200/0.1]-5
ACBTA4FQ-[10-400/0.1]-[10-200/0.1]-5
ACBTA4H-[20-1200/1]-[20-1000/1]-5-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,​4]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSColor Grade Hole Machining Shape 4-surface Finishing Method 4-surface Tolerance Selectable A
(mm)
B
(mm)
F
(mm)
G
(mm)
M
(mm)
N
(mm)
P
(mm)
Q
(mm)
T
(mm)
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.53 ~ 10---3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5-3 ~ 10--3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5--3 ~ 10-3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5---5 ~ 83 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.53 ~ 10---3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5-3 ~ 10--3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5--3 ~ 10-3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5---5 ~ 83 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandardNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledM (0/-0.2)10 ~ 40010 ~ 200------5 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandardNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledN (±0.1)10 ~ 40010 ~ 200------5 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandardNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledQ (+0.2/0)10 ~ 40010 ~ 200------5 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.53 ~ 10---3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.5-3 ~ 10--3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.5--3 ~ 10-3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.5---5 ~ 83 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.53 ~ 10---3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.5-3 ~ 10--3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.5--3 ~ 10-3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.5---5 ~ 83 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.53 ~ 10---3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.5-3 ~ 10--3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.5--3 ~ 10-3 ~ 25
1 Piece(s) 10 Day(s) or more 10TransparentStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.5---5 ~ 83 ~ 25
1 Piece(s) 8 Day(s) or more 10TransparentStandardNo Drilling AlterationNo Hole Machining (Standard Type)Circular Sawing-20 ~ 120020 ~ 1000------3 ~ 25
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.53 ~ 8---3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5-3 ~ 10--3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5--3 ~ 10-3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5---5 ~ 83 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.53 ~ 8---3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5-3 ~ 10--3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5--3 ~ 8-3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5---5 ~ 83 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandardNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledM (0/-0.2)10 ~ 40010 ~ 200------5 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandardNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledN (±0.1)10 ~ 40010 ~ 200------5 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandardNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledQ (+0.2/0)10 ~ 40010 ~ 200------5 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.53 ~ 8---3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.5-3 ~ 10--3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.5--3 ~ 10-3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.5---5 ~ 83 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.53 ~ 8---3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.5-3 ~ 10--3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.5--3 ~ 10-3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard6HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 991.5---5 ~ 83 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.53 ~ 8---3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.5-3 ~ 10--3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.5--3 ~ 10-3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownStandard8HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 595.56 ~ 495.5---5 ~ 83 ~ 10
1 Piece(s) 8 Day(s) or more 10Smoke BrownStandardNo Drilling AlterationNo Hole Machining (Standard Type)Circular Sawing-20 ~ 120020 ~ 1000------3 ~ 10
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.53 ~ 4---3 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5-3 ~ 10--3 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5--3 ~ 6-3 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.54.5 ~ 995.5---5 ~ 83 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.53 ~ 4---3 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5-3 ~ 10--3 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5--3 ~ 6-3 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic2HLNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10004.5 ~ 1195.56 ~ 991.5---5 ~ 83 ~ 5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistaticNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledM (0/-0.2)10 ~ 40010 ~ 200------5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistaticNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledN (±0.1)10 ~ 40010 ~ 200------5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistaticNo Drilling AlterationNo Hole Machining (Standard Type)4-surface MilledQ (+0.2/0)10 ~ 40010 ~ 200------5
1 Piece(s) 10 Day(s) or more 10Smoke BrownAntistatic4HNumber of Holes Selection Type (With 2H to 8H Holes)Circular Sawing-20 ~ 120020 ~ 10006 ~ 1191.56 ~ 991.53 ~ 4---3 ~ 5

Loading...

More Information

Acrylic (Resin) Plates:Related Image
 

Basic Information

Material Acrylic

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)