(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Epoxy Glass Plates-Standard / High Temperature Grade

Epoxy Glass Plates-Standard / High Temperature Grade

Epoxy glass is a material with superior heat and moisture resistance compared to Bakelite.

Epoxy Glass Plates:Related Image

Type[ M ]GradeColorOperating Ambient Temperature
EPXAStandardGreenAmbient Temperature ~ 155°C
EPXARHigh TemperatureBlackAmbient Temperature ~ 260°C
[ M ] Material: Epoxy Glass

Specifications

■Standard Type
Part Number-A-B-T
EPXAR-100-55-10
■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
EPXA4H
EPXA4H
-
-
200
400
-
-
150
300
-
-
5
15
-
-
F160
F300
-
-
G120
G100
-
-
N6
M5

-

L10
■Standard Type
Part NumberABT
Type1mm IncrementSelection
EPXA
(Standard)
20~80020~6003, 4, 5, 6, 8, 10, 12, 15, 20
EPXAR
(High Temperature)
3, 4, 5, 6, 8, 10
• T Dimension Tolerance, Rate of Camber and Torsion
TT Dimension ToleranceRates of Camber and Torsion
EPXAEPXARper 1,000mm
3±0.35±0.11.2% or Less
4±0.40
5±0.551.0% or Less
6±0.60
8±0.700.6% or Less
10±0.800.5% or Less
12±0.90 
15±1.10-0.4% or Less
20±1.30 0.2% or Less

• Dimension Tolerance of A and B
A, BA, B Dimension Tolerance
Unit: mm
~99±0.5
100~250±0.75
251~±1.0
■Pre-drilled Type
Part NumberABTFGPre-drilled Hole Nominal Dia.
Through HoleCounterbore HoleThreaded Insert
TypeNumber of Holes1mm IncrementEPXAEPXAR0.5mm IncrementNZML
EPXA
(Standard)

EPXAR
(High Temperature)
2H (Horizontal)
2HL (Vertical)
4H
6H
20~80020~600336~791.5
(2H, 4H)

4.5~795.5
(2HL)

6~395.5

(6H)
4.5~595.5
(2H)

6~591.5
(2HL, 4H, 6H)
3
4
5
6
8
10
--Select from Table 1
44--
55-34    
663    345   
88345  3456  
1010 456 34568 
12- 456 3456810
15- 45683456810
20- 45683456810
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

Alterations

Epoxy Glass Plates:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
EPXA2H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-791.5/0.5]-G[4.5-595.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXA2H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-791.5/0.5]-G[4.5-595.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXA2H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-791.5/0.5]-G[4.5-595.5/0.5]-Z[3,​4,​5,​6,​8]
EPXA2HL-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[4.5-795.5/0.5]-G[6-591.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXA2HL-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[4.5-795.5/0.5]-G[6-591.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXA2HL-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[4.5-795.5/0.5]-G[6-591.5/0.5]-Z[3,​4,​5,​6,​8]
EPXA4H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-791.5/0.5]-G[6-591.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXA4H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-791.5/0.5]-G[6-591.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXA4H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-791.5/0.5]-G[6-591.5/0.5]-Z[3,​4,​5,​6,​8]
EPXA6H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-395.5/0.5]-G[6-591.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXA6H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-395.5/0.5]-G[6-591.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXA6H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]-F[6-395.5/0.5]-G[6-591.5/0.5]-Z[3,​4,​5,​6,​8]
EPXA-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10,​12,​15,​20]
EPXAR2H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-791.5/0.5]-G[4.5-595.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXAR2H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-791.5/0.5]-G[4.5-595.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXAR2H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-791.5/0.5]-G[4.5-595.5/0.5]-Z[3,​4,​5,​6]
EPXAR2HL-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[4.5-595.5/0.5]-G[6-591.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXAR2HL-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[4.5-595.5/0.5]-G[6-591.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXAR2HL-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[4.5-595.5/0.5]-G[6-591.5/0.5]-Z[3,​4,​5,​6]
EPXAR4H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-791.5/0.5]-G[6-591.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXAR4H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-791.5/0.5]-G[6-591.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXAR4H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-791.5/0.5]-G[6-591.5/0.5]-Z[3,​4,​5,​6]
EPXAR6H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-395.5/0.5]-G[6-591.5/0.5]-M[3,​4,​5,​6,​8,​10]
EPXAR6H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-395.5/0.5]-G[6-591.5/0.5]-N[3,​4,​5,​6,​8,​10]
EPXAR6H-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]-F[6-395.5/0.5]-G[6-591.5/0.5]-Z[3,​4,​5,​6]
EPXAR-[20-800/1]-[20-600/1]-[3,​4,​5,​6,​8,​10]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSGrade Color Hole Machining A
(mm)
B
(mm)
Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
Nominal Dia. of Threaded Insert [M] T
(mm)
Through Hole Nominal Dia. [N]
1 Piece(s) 12 Day(s) or more 10StandardGreen2 Holes, Horizontal20 ~ 80020 ~ 600-6 ~ 791.54.5 ~ 595.53 ~ 103 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen2 Holes, Horizontal20 ~ 80020 ~ 600-6 ~ 791.54.5 ~ 595.5-3 ~ 203 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGreen2 Holes, Horizontal20 ~ 80020 ~ 6003 ~ 86 ~ 791.54.5 ~ 595.5-3 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen2 Holes, Vertical20 ~ 80020 ~ 600-4.5 ~ 795.56 ~ 591.53 ~ 103 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen2 Holes, Vertical20 ~ 80020 ~ 600-4.5 ~ 795.56 ~ 591.5-3 ~ 203 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGreen2 Holes, Vertical20 ~ 80020 ~ 6003 ~ 84.5 ~ 795.56 ~ 591.5-3 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen4H20 ~ 80020 ~ 600-6 ~ 791.56 ~ 591.53 ~ 103 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen4H20 ~ 80020 ~ 600-6 ~ 791.56 ~ 591.5-3 ~ 203 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGreen4H20 ~ 80020 ~ 6003 ~ 86 ~ 791.56 ~ 591.5-3 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen6H20 ~ 80020 ~ 600-6 ~ 395.56 ~ 591.53 ~ 103 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreen6H20 ~ 80020 ~ 600-6 ~ 395.56 ~ 591.5-3 ~ 203 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGreen6H20 ~ 80020 ~ 6003 ~ 86 ~ 395.56 ~ 591.5-3 ~ 20-
1 Piece(s) 12 Day(s) or more 10StandardGreenNo Drilling Alteration20 ~ 80020 ~ 600----3 ~ 20-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack2 Holes, Horizontal20 ~ 80020 ~ 600-6 ~ 791.54.5 ~ 595.53 ~ 103 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack2 Holes, Horizontal20 ~ 80020 ~ 600-6 ~ 791.54.5 ~ 595.5-3 ~ 103 ~ 10
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack2 Holes, Horizontal20 ~ 80020 ~ 6003 ~ 66 ~ 791.54.5 ~ 595.5-3 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack2 Holes, Vertical20 ~ 80020 ~ 600-4.5 ~ 595.56 ~ 591.53 ~ 103 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack2 Holes, Vertical20 ~ 80020 ~ 600-4.5 ~ 595.56 ~ 591.5-3 ~ 103 ~ 10
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack2 Holes, Vertical20 ~ 80020 ~ 6003 ~ 64.5 ~ 595.56 ~ 591.5-3 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack4H20 ~ 80020 ~ 600-6 ~ 791.56 ~ 591.53 ~ 103 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack4H20 ~ 80020 ~ 600-6 ~ 791.56 ~ 591.5-3 ~ 103 ~ 10
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack4H20 ~ 80020 ~ 6003 ~ 66 ~ 791.56 ~ 591.5-3 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack6H20 ~ 80020 ~ 600-6 ~ 395.56 ~ 591.53 ~ 103 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack6H20 ~ 80020 ~ 600-6 ~ 395.56 ~ 591.5-3 ~ 103 ~ 10
1 Piece(s) 12 Day(s) or more 10High TemperatureBlack6H20 ~ 80020 ~ 6003 ~ 66 ~ 395.56 ~ 591.5-3 ~ 10-
1 Piece(s) 12 Day(s) or more 10High TemperatureBlackNo Drilling Alteration20 ~ 80020 ~ 600----3 ~ 10-

Loading...

  1. 1

More Information

[ ! ]Properties >>P.955
[ ! ]High Temperature Grade EPXAR excels in antistatic effect.
 

Basic Information

Material Epoxy Glass (Glass Epoxy) Material Name Epoxy Glass (Glass Epoxy)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)