(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

PEEK Plates-Standard / Sliding / Conductive Grade

PEEK Plates-Standard / Sliding / Conductive Grade

[Features]·PEEK is a super engineering plastic with excellent heat resistance and chemical resistance.

■Standard Type
PEEK Plates:Related Image

■Pre-drilled Type
PEEK Plates:Related Image
 
Type[ M ]GradeColorOperating Ambient Temperature
PKAStandardAsh Brown-50~250°C
PKAHSlidingBlack
PKCAElectrical ConductivityBlackAmbient Temp. ~ 250°C
The material is not filled with glass fiber.
Milled*=By using a milling cutter or router/planer
[ M ] Material: PEEK
 

Specifications

■Standard Type
Part Number-A-B-T
PKA
PKANTQ
PKA4FN
PKA6FMN
PKA2FQ
-
-
-
-
-
300
200.5
150.5
100.3
80
-
-
-
-
-
200
100.5
100.3
90.5

50
-
-
-
-
-
5
10
16
10.5
5
• Circular Sawing
• Guaranteed Perpendicularity of Circular Saw Cuts
• 4-side Milling etc.
• 6-surface Milling etc.
• Upper-lower Surface Milling etc.

■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
PKA2H
PKCA2H
-
-
50
150
-
-
25
120
-
-
8
10
-
-
F34
F80
-
-
G10
G60
-
-
N4
M8

-

L8
■Standard Type
Part NumberDimension Range by MaterialABT
TypeFinishT Dimension ToleranceA, B Dimension Tolerance
PKA
PKAH
PKCA
(Standard)
(Sliding)
(Conductive)
Circular Sawing1mm IncrementSelection
-Not availableNot availablePKA20~30020~2005, 8, 10
20~25020~15016, 20, 25
PKAH20~30020~2005, 8, 10
PKCA10
20~25020~15016, 20
Guaranteed Perpendicularity of Circular Sawing (NT)0.1mm IncrementSelection
NTNot available
Q
N
M
T5, 8, 10
0~+0.3
±0.2
-0.3~0
T16, 20
0~+0.4
±0.3
-0.4~0
T25
0~+0.5
±0.4
-0.5~0
PKA20~30020~2005, 8, 10
20~25020~15016, 20, 25
PKAH20~30020~2005, 8, 10
PKCA10
20~25020~15016, 20
4-side Milling etc. (4F)0.1mm IncrementSelection
4FNot availableQ 0~+0.2
N ±0.1
M -0.2~0
PKA10~30010~2005, 8, 10
10~25010~15016, 20, 25
PKAH10~30010~2005, 8, 10
PKCA10
10~25010~15016, 20
6-surface Milling etc. (6F)0.1mm Increment0.1mm Increment
6FQ 0~+0.2
N ±0.1
M -0.2~0
Q 0~+0.2
N ±0.1
M -0.2~0
PKA10~30010~2005~9
10~25010~1509.1~24
PKAH10~30010~2005~9
PKCA
10~25010~1509.1~19
Upper-lower Surface Milling etc. (2F)1mm Increment0.1mm Increment
2FQ 0~+0.2
N ±0.1
M -0.2~0
Not availablePKA20~25020~1505~24
PKAH5~9
PKCA9.1~19
• Dimension Tolerance of A and B
A, BA, B Dimension Tolerance
Unit: mm
~99±0.5
100~250±0.75
251~±1.0

• T Dimension Tolerance, Rate of Camber and Torsion
TT Dimension ToleranceRates of Camber and Torsion
PKAPKAHPKCAper 1,000mm
5, 8, 100~+1.10~+1.10~+1.11.2% or Less
16, 200~+1.7-0~+1.70.8% or Less
25--

Precision Guarantee
FinishWidth ParallelismPerpendicularity of Reference Plane
per 100mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)0.10.1
4-side Milling etc. (4F)
6-surface Milling etc. (6F)
[ ! ]Reference plane stickers are attached to 4-side milled plates.
■Pre-drilled Type
Part NumberABT Dimension Range by MaterialTFG
TypeT Dimension ToleranceNumber of Holes
PKA
PKAH
PKCA
(Standard)
(Sliding)
(Conductive)
Circular Sawing1mm Increment Selection0.5mm Increment
Not available2H (Horizontal)
2HL (Vertical)
4H
6H
20~30020~200PKA5, 8, 106~291.5
(2H, 4H)
4.5~295.5
(2HL)
6~145.5
(6H)
4.5~195.5
(2H)
6~191.5
(2HL, 4H, 6H)
PKAH
PKCA10
20~25020~150PKA16, 20, 256~241.5
(2H, 4H)
4.5~245.5
(2HL)
6~120.5
(6H)
4.5~145.5
(2H)
6~141.5
(2HL, 4H, 6H)
PKCA16, 20
Upper-lower Surface Milling etc.1mm Increment 0.1mm Increment0.5mm Increment
2FQ 0~+0.2
2FN ±0.1
2FM -0.2~0
2H (Horizontal)
2HL (Vertical)
4H
6H
20~25020~150PKA5~246~241.5
(2H, 4H)
4.5~245.5
(2HL)
6~120.5
(6H)
4.5~145.5
(2H)
6~141.5
(2HL, 4H, 6H)
PKAH5~9
PKCA5~19
 
T DimensionPre-drilled Hole Nominal Dia.
Through HoleCounterbore HoleThreaded Insert
NZML
5~73
4
5
6
8
10
-34    (Threaded Insert Length)
Select from
Table 1
8, 9345  34568 
10~15 456 3456810
16~25 45683456810
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5;
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

Alterations

■Standard Type
PEEK Plates:Related Image
■Pre-drilled Type
PEEK Plates:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PKA2FM2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FM-[20-250/1]-[20-150/1]-[5-39/0.1]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN-[20-250/1]-[20-150/1]-[5-39/0.1]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-29/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-39/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-39/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ-[20-250/1]-[20-150/1]-[5-39/0.1]
PKA2H-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2H-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2H-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[6-491.5/0.5]-G[4.5-395.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2HL-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[4.5-495.5/0.5]-G[6-391.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2HL-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[4.5-495.5/0.5]-G[6-391.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2HL-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[4.5-495.5/0.5]-G[6-391.5/0.5]-Z[3,​4,​5,​6,​8]
PKA4FM-[10-300/0.1]-[10-200/0.1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]
PKA4FN-[10-300/0.1]-[10-200/0.1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]
PKA4FQ-[10-300/0.1]-[10-200/0.1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]
PKA4H-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[6-491.5/0.5]-G[6-391.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA4H-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[6-491.5/0.5]-G[6-391.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA4H-[20-500/1]-[20-400/1]-[5,​6,​8,​10,​12,​16,​20,​25,​30]-F[6-491.5/0.5]-G[6-391.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA6FMM-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FMN-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FMQ-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FNM-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FNN-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FNQ-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FQM-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FQN-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
PKA6FQQ-[10-300/0.1]-[10-200/0.1]-[5-39/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSGrade Color Hole Machining Finishing T Dimension Tolerance AB Dimension Tolerance A
(mm)
B
(mm)
F
(mm)
G
(mm)
M
(mm)
N
(mm)
T
(mm)
Z
(mm)
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.53 ~ 10-5 ~ 29-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5-3 ~ 105 ~ 29-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5--5 ~ 293 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5--5 ~ 393 ~ 8
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5--5 ~ 393 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5--5 ~ 393 ~ 10
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling AlterationUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 150----5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.53 ~ 10-5 ~ 29-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5-3 ~ 105 ~ 29-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5--5 ~ 293 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5--5 ~ 393 ~ 8
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5--5 ~ 393 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5--5 ~ 393 ~ 10
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling AlterationUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 150----5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.53 ~ 10-5 ~ 29-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5-3 ~ 105 ~ 29-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5--5 ~ 293 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5--5 ~ 393 ~ 8
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5--5 ~ 393 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.53 ~ 10-5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5-3 ~ 105 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5--5 ~ 393 ~ 10
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling AlterationUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 150----5 ~ 39-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalCircular Sawing--20 ~ 50020 ~ 4006 ~ 491.54.5 ~ 395.53 ~ 10-10 ~ 30-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalCircular Sawing--20 ~ 50020 ~ 4006 ~ 491.54.5 ~ 395.5-3 ~ 1010 ~ 30-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, HorizontalCircular Sawing--20 ~ 50020 ~ 4006 ~ 491.54.5 ~ 395.5--10 ~ 303 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalCircular Sawing--20 ~ 50020 ~ 4004.5 ~ 495.56 ~ 391.53 ~ 10-10 ~ 30-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalCircular Sawing--20 ~ 50020 ~ 4004.5 ~ 495.56 ~ 391.5-3 ~ 1010 ~ 30-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown2 Holes, VerticalCircular Sawing--20 ~ 50020 ~ 4004.5 ~ 495.56 ~ 391.5--10 ~ 303 ~ 8
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration4-side MillingQ (+0.2/0)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 16-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration4-side Milling-N (±0.1)10 ~ 30010 ~ 200----5 ~ 16-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration4-side Milling-Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 16-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HCircular Sawing--20 ~ 50020 ~ 4006 ~ 491.56 ~ 391.53 ~ 10-10 ~ 30-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HCircular Sawing--20 ~ 50020 ~ 4006 ~ 491.56 ~ 391.5-3 ~ 1010 ~ 30-
1 Piece(s) 12 Day(s) or more 10StandardGray Brown4HCircular Sawing--20 ~ 50020 ~ 4006 ~ 491.56 ~ 391.5--10 ~ 303 ~ 10
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingM (0/-0.2)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingM (0/-0.2)N (±0.1)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingM (0/-0.2)Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingN (±0.1)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingN (±0.1)N (±0.1)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingN (±0.1)Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingQ (+0.2/0)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingQ (+0.2/0)N (±0.1)10 ~ 30010 ~ 200----5 ~ 39-
1 Piece(s) 10 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingQ (+0.2/0)Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 39-

Loading...

More Information

[ ! ]Properties >>P.953
 

Basic Information

Material PEEK Material Name PEEK

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)