(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Fitur "Auto Translate" pada halaman eKatalog sementara ini tidak tersedia. Mohon maaf atas ketidaknyamanannya.
    Auto translation feature on our e-Catalog page is temporarily not available. We apologize for any inconvenience.
  • Sehubungan dengan wabah virus Corona (2019-nCoV), kami mohon maaf dikarenakan beberapa supplier harus berhenti beroperasi dan tingginya permintaan akan beberapa produk, hal ini akan mempengaruhi lead time beberapa produk menjadi lebih lama dari waktu standar.
    Regarding the Coronavirus (2019-nCoV) Pandemic, Some of supplier have to stop working to follow additional precautionary measures the virus and due to effect of high demand some product, it may cause some of product take longer than standard lead time.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 14:00 25/10/2020 sampai dengan 2:00 pada tanggal 26/10/2020. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 14:00 25/10/2020 to 2:00 (WIB) 26/10/2020. We apologize for the inconvenience.

PEEK Plates-Standard / Sliding / Conductive Grade

■Standard Type
PEEK Plates:Related Image

■Pre-drilled Type
PEEK Plates:Related Image
 
Type[ M ]GradeColorOperating Ambient Temperature
PKAStandardAsh Brown-50~250°C
PKAHSlidingBlack
PKCAElectrical ConductivityBlackAmbient Temp. ~ 250°C
The material is not filled with glass fiber.
Milled*=By using a milling cutter or router/planer
[ M ] Material: PEEK
 

Specifications

■Standard Type
Part Number-A-B-T
PKA
PKANTQ
PKA4FN
PKA6FMN
PKA2FQ
-
-
-
-
-
300
200.5
150.5
100.3
80
-
-
-
-
-
200
100.5
100.3
90.5

50
-
-
-
-
-
5
10
16
10.5
5
• Circular Sawing
• Guaranteed Perpendicularity of Circular Saw Cuts
• 4-side Milling etc.
• 6-surface Milling etc.
• Upper-lower Surface Milling etc.

■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
PKA2H
PKCA2H
-
-
50
150
-
-
25
120
-
-
8
10
-
-
F34
F80
-
-
G10
G60
-
-
N4
M8

-

L8
■Standard Type
Part NumberDimension Range by MaterialABT
TypeFinishT Dimension ToleranceA, B Dimension Tolerance
PKA
PKAH
PKCA
(Standard)
(Sliding)
(Conductive)
Circular Sawing1mm IncrementSelection
-Not availableNot availablePKA20~30020~2005, 8, 10
20~25020~15016, 20, 25
PKAH20~30020~2005, 8, 10
PKCA10
20~25020~15016, 20
Guaranteed Perpendicularity of Circular Sawing (NT)0.1mm IncrementSelection
NTNot available
Q
N
M
T5, 8, 10
0~+0.3
±0.2
-0.3~0
T16, 20
0~+0.4
±0.3
-0.4~0
T25
0~+0.5
±0.4
-0.5~0
PKA20~30020~2005, 8, 10
20~25020~15016, 20, 25
PKAH20~30020~2005, 8, 10
PKCA10
20~25020~15016, 20
4-side Milling etc. (4F)0.1mm IncrementSelection
4FNot availableQ 0~+0.2
N ±0.1
M -0.2~0
PKA10~30010~2005, 8, 10
10~25010~15016, 20, 25
PKAH10~30010~2005, 8, 10
PKCA10
10~25010~15016, 20
6-surface Milling etc. (6F)0.1mm Increment0.1mm Increment
6FQ 0~+0.2
N ±0.1
M -0.2~0
Q 0~+0.2
N ±0.1
M -0.2~0
PKA10~30010~2005~9
10~25010~1509.1~24
PKAH10~30010~2005~9
PKCA
10~25010~1509.1~19
Upper-lower Surface Milling etc. (2F)1mm Increment0.1mm Increment
2FQ 0~+0.2
N ±0.1
M -0.2~0
Not availablePKA20~25020~1505~24
PKAH5~9
PKCA9.1~19
• Dimension Tolerance of A and B
A, BA, B Dimension Tolerance
Unit: mm
~99±0.5
100~250±0.75
251~±1.0

• T Dimension Tolerance, Rate of Camber and Torsion
TT Dimension ToleranceRates of Camber and Torsion
PKAPKAHPKCAper 1,000mm
5, 8, 100~+1.10~+1.10~+1.11.2% or Less
16, 200~+1.7-0~+1.70.8% or Less
25--

Precision Guarantee
FinishWidth ParallelismPerpendicularity of Reference Plane
per 100mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)0.10.1
4-side Milling etc. (4F)
6-surface Milling etc. (6F)
[ ! ]Reference plane stickers are attached to 4-side milled plates.
■Pre-drilled Type
Part NumberABT Dimension Range by MaterialTFG
TypeT Dimension ToleranceNumber of Holes
PKA
PKAH
PKCA
(Standard)
(Sliding)
(Conductive)
Circular Sawing1mm Increment Selection0.5mm Increment
Not available2H (Horizontal)
2HL (Vertical)
4H
6H
20~30020~200PKA5, 8, 106~291.5
(2H, 4H)
4.5~295.5
(2HL)
6~145.5
(6H)
4.5~195.5
(2H)
6~191.5
(2HL, 4H, 6H)
PKAH
PKCA10
20~25020~150PKA16, 20, 256~241.5
(2H, 4H)
4.5~245.5
(2HL)
6~120.5
(6H)
4.5~145.5
(2H)
6~141.5
(2HL, 4H, 6H)
PKCA16, 20
Upper-lower Surface Milling etc.1mm Increment 0.1mm Increment0.5mm Increment
2FQ 0~+0.2
2FN ±0.1
2FM -0.2~0
2H (Horizontal)
2HL (Vertical)
4H
6H
20~25020~150PKA5~246~241.5
(2H, 4H)
4.5~245.5
(2HL)
6~120.5
(6H)
4.5~145.5
(2H)
6~141.5
(2HL, 4H, 6H)
PKAH5~9
PKCA5~19
 
T DimensionPre-drilled Hole Nominal Dia.
Through HoleCounterbore HoleThreaded Insert
NZML
5~73
4
5
6
8
10
-34    (Threaded Insert Length)
Select from
Table 1
8, 9345  34568 
10~15 456 3456810
16~25 45683456810
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5;
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

Alterations

■Standard Type
PEEK Plates:Related Image
■Pre-drilled Type
PEEK Plates:Related Image

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FM6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FM-[20-250/1]-[20-150/1]-[5-24/0.1]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FN6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FN-[20-250/1]-[20-150/1]-[5-24/0.1]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ2H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[4.5-145.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ2HL-[20-250/1]-[20-150/1]-[5-24/0.1]-F[4.5-245.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ4H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-241.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2FQ6H-[20-250/1]-[20-150/1]-[5-24/0.1]-F[6-120.5/0.5]-G[6-141.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2FQ-[20-250/1]-[20-150/1]-[5-24/0.1]
PKA2H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA2HL-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[4.5-295.5/0.5]-G[9-191/0.5]-M[3,​4,​5,​6,​8,​10]
PKA2HL-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[4.5-295.5/0.5]-G[9-191/0.5]-N[3,​4,​5,​6,​8,​10]
PKA2HL-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[4.5-295.5/0.5]-G[9-191/0.5]-Z[3,​4,​5,​6,​8]
PKA4FM-[10-300/0.1]-[10-200/0.1]-[5,​8,​10,​16,​20,​25]
PKA4FN-[10-300/0.1]-[10-200/0.1]-[5,​8,​10,​16,​20,​25]
PKA4FQ-[10-300/0.1]-[10-200/0.1]-[5,​8,​10,​16,​20,​25]
PKA4H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[6-191.5/0.5]-M[3,​4,​5,​6,​8,​10]
PKA4H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[6-191.5/0.5]-N[3,​4,​5,​6,​8,​10]
PKA4H-[20-300/1]-[20-200/1]-[5,​8,​10,​16,​20,​25]-F[6-291.5/0.5]-G[6-191.5/0.5]-Z[3,​4,​5,​6,​8,​10]
PKA6FMM-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FMN-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FMQ-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FNM-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FNN-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FNQ-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FQM-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FQN-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
PKA6FQQ-[10-300/0.1]-[10-200/0.1]-[5-24/0.1]
Part NumberVolume DiscountDays to ShipRoHSGrade Color Hole Machining Finishing T Dimension Tolerance AB Dimension Tolerance A
(mm)
B
(mm)
F
(mm)
G
(mm)
M
(mm)
N
(mm)
T
(mm)
Z
(mm)
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5--5 ~ 243 ~ 10
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5--5 ~ 243 ~ 8
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5--5 ~ 243 ~ 10
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5--5 ~ 243 ~ 10
15 Day(s) or more 10StandardGray BrownNo Drilling AlterationUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 150----5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingM (0/-0.2)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5--5 ~ 243 ~ 10
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5--5 ~ 243 ~ 8
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5--5 ~ 243 ~ 10
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5--5 ~ 243 ~ 10
15 Day(s) or more 10StandardGray BrownNo Drilling AlterationUpper-lower Surface MillingN (±0.1)-20 ~ 25020 ~ 150----5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.54.5 ~ 145.5--5 ~ 243 ~ 10
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1504.5 ~ 245.56 ~ 141.5--5 ~ 243 ~ 8
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown4HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 241.56 ~ 141.5--5 ~ 243 ~ 10
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.53 ~ 10-5 ~ 24-
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5-3 ~ 105 ~ 24-
17 Day(s) or more 10StandardGray Brown6HUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 1506 ~ 120.56 ~ 141.5--5 ~ 243 ~ 10
15 Day(s) or more 10StandardGray BrownNo Drilling AlterationUpper-lower Surface MillingQ (+0.2/0)-20 ~ 25020 ~ 150----5 ~ 24-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalCircular Sawing--20 ~ 30020 ~ 2006 ~ 291.54.5 ~ 195.53 ~ 10-5 ~ 25-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalCircular Sawing--20 ~ 30020 ~ 2006 ~ 291.54.5 ~ 195.5-3 ~ 105 ~ 25-
17 Day(s) or more 10StandardGray Brown2 Holes, HorizontalCircular Sawing--20 ~ 30020 ~ 2006 ~ 291.54.5 ~ 195.5--5 ~ 253 ~ 10
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalCircular Sawing--20 ~ 30020 ~ 2004.5 ~ 295.59 ~ 1913 ~ 10-5 ~ 25-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalCircular Sawing--20 ~ 30020 ~ 2004.5 ~ 295.59 ~ 191-3 ~ 105 ~ 25-
17 Day(s) or more 10StandardGray Brown2 Holes, VerticalCircular Sawing--20 ~ 30020 ~ 2004.5 ~ 295.59 ~ 191--5 ~ 253 ~ 8
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration4-side MillingQ (+0.2/0)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 25-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration4-side Milling-N (±0.1)10 ~ 30010 ~ 200----5 ~ 25-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration4-side Milling-Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 25-
17 Day(s) or more 10StandardGray Brown4HCircular Sawing--20 ~ 30020 ~ 2006 ~ 291.56 ~ 191.53 ~ 10-5 ~ 25-
17 Day(s) or more 10StandardGray Brown4HCircular Sawing--20 ~ 30020 ~ 2006 ~ 291.56 ~ 191.5-3 ~ 105 ~ 25-
17 Day(s) or more 10StandardGray Brown4HCircular Sawing--20 ~ 30020 ~ 2006 ~ 291.56 ~ 191.5--5 ~ 253 ~ 10
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingM (0/-0.2)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingM (0/-0.2)N (±0.1)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingM (0/-0.2)Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingN (±0.1)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingN (±0.1)N (±0.1)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingN (±0.1)Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingQ (+0.2/0)M (0/-0.2)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingQ (+0.2/0)N (±0.1)10 ~ 30010 ~ 200----5 ~ 24-
15 Day(s) or more 10StandardGray BrownNo Drilling Alteration6-surface MillingQ (+0.2/0)Q (+0.2/0)10 ~ 30010 ~ 200----5 ~ 24-

Loading...

More Information

[ ! ]Properties >>P.953
 

Basic Information

Material PEEK Material Name PEEK

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)