Aluminum Hinges Ultra Low Head Bolt Hole Type

Brand :

MISUMI

Caution

Product Description

Product Overview of Hinges

Economy series aluminum Hinges Ultra low head bolt hole type
Economy series aluminum butterfly Hinges Ultra low head bolt type
aluminum butterfly Hinges with smooth appearance due to use of ultra-low head bolt

Usage Method of Hinges

According to the weight of the door body where the Hinges is mounted, the load-carrying capacity of the hinge can be calculated. Determine the utilization direction first, and calculate according to the length and width of the door body

Utilization Method of Hinges	Lengthwise Utilization		Lateral Utilization
	A=2XB	A≠2XB	-

Allowable Load Calculation Formula	Allowable Load =W	Allowable Load =W(B/A)*2	Allowable Load =W

Specifications Overview of Hinges

Product Material and Surface Treatment Overview of Hinges:

TYPE of Hinges	Material	Surface Treatment
C-HHCSNT	A6063-T5 Bushing: Polyacetal	Alumite Treatment

*The allowable load is the value when 2 pieces are used.

Example Use of Hinges

Depending on the profile to be fixed, the selectable product specifications can be determined by the allowable load weight.
For details, refer to the following table for the applicable Hinges model.

Common combinations of aluminum profiles can be confirmed and found from the table below.

Representative Dimensional Drawing of Hinges	Type of Matching Profile	Suitable Profile	* Allowable Load		Product Model	Surface Treatment	Mounting Pitch S mm
			KG	N
	Profile of the Same Size on Two Sides	Link 20/20 Profile	8	78	C-HHFL5	Clear Anodized	21
					C-HHBFL5	Black Anodized
			10	98	HHPSN5	Clear Anodized
					HHPBSN5	Black Anodized
			20	196	C-HHDL5	Clear Anodized
					C-HHBDL5	Black Anodized
		Link 30/30 Profile	8	78	C-HHFL6	Clear Anodized	32
					C-HHBFL6	Black Anodized
			10	98	HHPSN6	Clear Anodized
					HHPBSN6	Black Anodized
			20	196	C-HHDL6	Clear Anodized
					C-HHBDL6	Black Anodized
		Link 40/40 Profile	8	78	C-HHFL8	Clear Anodized	42
					C-HHBFL8	Black Anodized
			10	98	HHPSN8	Clear Anodized
					HHPBSN8	Black Anodized
			20	196	C-HHDL8	Clear Anodized
					C-HHBDL8	Black Anodized
		Link 45/45 Profile	12	118	C-HHFL8-45	Clear Anodized	47
					C-HHBFL8-45	Black Anodized
			15	147	HHPSN8-45	Clear Anodized
					HHPBSN8-45	Black Anodized
			30	294	C-HHDL8-45	Clear Anodized
					C-HHBDL8-45	Black Anodized
	Profile with Different Sizes on Two Sides	Link 20/30 Profile	8	78	C-HHFLS6-5	Clear Anodized	26.5
			10	98	HHPSF6-5
			20	196	C-HHDLS6-5
		Link 30/40 Profile	8	78	C-HHFLS8-5		31.5
			10	98	HHPSF8-5
			20	196	C-HHDLS8-5
		Link 20/45 Profile	8	78	C-HHFLS845-5		34
			10	98	HHPSF845-5
			20	196	C-HHDLS845-5
		Link 20/40 Profile	12	118	C-HHFLS8-6		37
			15	147	HHPSF8-6
			30	294	C-HHDLS8-6
		Link 30/45 Profile	12	118	C-HHFLS845-6		39
			15	147	HHPSF845-6
			30	294	C-HHDLS845-6

Precautions of Hinges

To install the Hinges on the panel, etc., it is recommended to choose the nut for the butterfly Hinges. For details, you can search TYPE: HHPNT or HHPFNT in the website to choose according to the size requirements.

Product Feature of Hinges

It can be matched with an ultra low head bolt to achieve smooth surface after mounting. It can also be mounted using an ordinary hexagon socket bolt. However, the protrusion of the hexagon socket bolt will influence the opening and closing angle of the Hinges to a certain extent. Refer to the mounting example for details.

Dimensional Drawing of Hinges

Economic type aluminum hinge Ultra low head bolt hole type Dimensional drawing

Refer to the Specification Table below for detailed product dimensions

Specification Table of Hinges

Part Number of Hinges		* Allowable Load		Weight g	L	W	K	P	J	S	d Through hole	D Countersunk hole	E
Type	No.	kg	N
C-HHCSNT	5	8	78	24	47	35.4	11	25	7.2	21	5.5	11	5.5
	6			30		48	8.5	30	8	32	6.5	11	6
	8			50	63	62	13	37	10	42

* The allowable load is the value when 2 pieces are used.