Urethane Molded Bearings With Screw Rod

Bearings with Resin is used to mold the bearing, which ensures the strength of the connection, while achieving higher economic efficiency.

Feature 1 : Bearings with Resin, Urethane part is made of imported thermoplastic material, with excellent abrasion resistance, and higher economy.
Feature 2 : Bearings with Resin, Bearing end cap is made of resin, which is less sensitive to the environment.
Feature 3 : Bearings with Resin, Urethane is partly formed on bearing, which is not easy to fall off, and it is suitable for various contact methods.

Depending on the model, the edge of the coated layer may have radian
Urethane is thermoplastic urethane.

Type	Material	Hardness	Color	Bearing Material	Shaft Material
Standard Threaded
C-TMBH	Urethane	Shaw A90	Green	Bearing Steel	Stainless Steel

Material color is subject to the actual product.
Urethane is sintered on the outer perimeter of bearing.
No brand is guaranteed for the bearings used in this product.

1. Material color is subject to the actual product. Urethane (white) may be yellowed due to aging.
2. MISUMI does not guarantee the bearing brand.
3. Anti-rust performance and maintenance of metal materials and surface treatment.
4. About urethane discoloring
Urethane will darken its color by absorbing UV rays or illuminating light. This phenomenon is called yellowing. But it does not affect its physical properties, please fully understand when using it.

New urethane	Yellowed urethane

5. Hydrolysis characteristics of urethane
If urethane is used for a long time in a moist or humid environment, it will be hydrolyzed and deteriorated.
It is recommended to manage the temperature and humidity of the warehouse and operating environment in areas with high humidity to extend the service life of the product.
 7. Urethane dimension change
Urethane dimension will change with the surrounding temperature, but the amount of change is not large, and it can be restored to its original dimension after a few hours at room temperature.