Flat Hinges HHSN

General stainless steel Flat Hinges, divided into A type linear hole products and B type and C type staggered hole products. The drawing shows 2-hole mounted products.
The products are processed with round holes. If you need countersunk products, please refer to tapered hole products. (Tapered hole products do not include staggered hole products. Please pay attention to purchase.)

【Features of Flat Hinges】
Round hole stainless steel Flat Hinges, including staggered hole products, with the mounting position adjustable according to actual needs. Pearlescent matte effect on the surface.
It can also be mounted using an ordinary hexagon socket bolt. However, the protrusion of the hexagon socket bolt will influence the opening and closing angle of the of Flat Hinges to a certain extent.

・Flat Hinges Material table

Material

SUS304

Example of using the maintenance mechanism for driving part

To mount the Flat Hinges on the panel, etc., it is recommended to use the nut for butterfly hinge.
Please check the following type to purchase:
HHPNT
HHPFNT
Note: The staggered hole type Flat Hinges is not suitable for the recommended nut, so please pay attention to the selection.

Butterfly Flat Hinges C-HHSN series products Dimensional drawing

Part Number (Type·No. or L)

C-HHSN25

 

Part Number		L	Shape No．	W	W1	W2	L1	L2	L3	C	C1	t	d	Number of segments	＊Allowable Load (N)	Weight (g)
Type	No.
C-HHSN	25	25	A	20	12	-	16	-	-	2	3.8	0.8	3.4	3	9.8	6
	30	30					22									7
	40	40		30	22		28			3	6.4	1.5			58.8	12
	50	50					36						4.5	5	68.6	16
	65A	65		50	30		23	23		4	8.5	2			127.4	25
	65		B		36	30	22	22
	75A	75	A		30	-	27	27					5.5		147	46
	75		B		36	30	26	26
	90A	90	A	60	38	-	35	35		6	12.7	3	6.6		245	68
	90		B		46	36	34	34
	100A	100	A		38	-	26	26	26						294	100
	100		C		46	36

Please know that the delivery time may be delayed.
＊The allowable load is the value when 2 pieces are used.