Chat NowTemperature Sensors Screw Mount Bendable PT100 Type
Brand :
MISUMI
Caution
Product Description
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Please keep the upper limit of the Temperature Sensors below the temperature measurement range of the product. If the bushing temperature exceeds the heat-resistant temperature, it is very easy to cause the breakage of the temperature measurement wire.
If the temperature of heat generating parts exceeds 100°C, please choose the specification with a front end as long as possible.
Economy Temperature Sensor Bendable Screw Mount
Flexible PositioningSecure Screw MountPrecise Measurement
- Features a bendable design for easy installation in tight spaces or around obstacles, maximizing placement options.
- Equipped with a screw mount (M6) for fast and secure attachment to a pre-drilled hole, saving you setup time.
- Delivers accurate temperature readings within a specified range.
- Utilizes a PT100 element known for excellent stability and repeatability, ensuring consistent performance over time.
- Features a bendable design for easy installation in tight spaces or around obstacles, maximizing placement options.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Temperature Sensors Product Overview
Temperature Sensors
The thermocouple consists of two wires made of different materials, which are welded together at the end. After the ambient temperature of the unheated part is measured, the temperature of the heating point can be accurately known. Because it must have the conductor made of two different materials, it is called the thermocouple. The thermocouples made of different materials can be used in different temperature ranges, and their sensitivities are different from each other. The sensitivity of a thermocouple refers to the change in the output potential difference when the temperature of the heating point changes by 1°C. For most metal-supported thermocouples, this value is between 5-40 µV/°C.
PT100
Pt100 is a platinum thermal resistance, and its resistance value is proportional to the change of temperature. 100 after PT means that its resistance value is 100 ohms at 0°C and about 138.5 ohms at 100°C.
The thermocouple consists of two wires made of different materials, which are welded together at the end. After the ambient temperature of the unheated part is measured, the temperature of the heating point can be accurately known. Because it must have the conductor made of two different materials, it is called the thermocouple. The thermocouples made of different materials can be used in different temperature ranges, and their sensitivities are different from each other. The sensitivity of a thermocouple refers to the change in the output potential difference when the temperature of the heating point changes by 1°C. For most metal-supported thermocouples, this value is between 5-40 µV/°C.
PT100
Pt100 is a platinum thermal resistance, and its resistance value is proportional to the change of temperature. 100 after PT means that its resistance value is 100 ohms at 0°C and about 138.5 ohms at 100°C.
Temperature Sensors Dimensional Drawing
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Temperature Sensors Specification Table
| Part Number | Total Length F(m) | Screw Size | Sensor Type | Temperature Range | Wire Operating Temperature Range |
| C-MFNPM6 | 1 | M6 | PT100 Type | 0 to 150℃ | 150℃ |
| 5 |
Temperature Sensors Product Features
Temperature Sensors Precautions
Please keep the upper limit of the Temperature Sensors below the temperature measurement range of the product. If the bushing temperature exceeds the heat-resistant temperature, it is very easy to cause the breakage of the temperature measurement wire.If the temperature of heat generating parts exceeds 100°C, please choose the specification with a front end as long as possible.Temperature Sensors Usage Method
Resistors should not be installed too close to the door or the heater. It is sufficient to make the front end of the temperature measuring resistor come into contact with the object to be measured. The gap between the sheath and protection sheath and the temperature mounting hole if not filled with insulation may cause overheating or cold air to enter the heating chamber. Therefore, this gap must be filled with insulating material such as insulating earth to stabilize the heat in the chamber. Air convection affects the accuracy of the heating process. The sleeve should not be installed too close to the heating chamber to avoid exceeding 100°C. The installation of the temperature measuring resistor should be avoided as much as possible from strong magnetic and electric fields. Therefore, the temperature measuring resistor and power cable should not be installed close to each other to avoid errors caused by signal interference. Do not install the temperature measuring resistor with the low-flow measuring medium. When measuring the gas temperature inside the tube, the temperature measuring resistor needs to be installed in the opposite direction of circulation and in full contact with the gas.
Temperature Sensors Related Products
Brand introduction
MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed