(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Free-Size Standard Independent Board Box, HJSA Series

Free-Size Standard Independent Board Box, HJSA Series

Click this image to zoom it.

Move the mouse over the image to zoom

  • Free-Size Standard Independent Board Box, HJSA Series
  • Free-Size Standard Independent Board Box, HJSA Series

Independent board box supporting a height of MAX 1900 mm

  • Steel
  • Free Size
  • 2DCAD
  • Hole Machining
  • Powder-Coated
 

Supports heights up to 1,900 mm
· Supports a variety of drilled holes unique to large panels
Frame is not included.
 

· There is a risk of falling over in the event of a storm or earthquake, depending on the weight and position of the equipment installed on free standing panels.
· In addition to the specified anchor bolt, take fall prevention countermeasures as necessary after mounting on the frame.
· If a large opening is machined, the strength of the housing may be compromised.
Standard Free-Standing Panel Box with Configurable Size HJSA Series: Related Images
   

 

Specification Table

Standard Free-Standing Panel Box with Configurable Size HJSA Series: Related Images
Disclaimer on Lead Time
The working days for this product do not include weekends or public holidays.
Check our WOS (Web Order System) for shipping date details.
DW
H
Normal Unit Price
600 to 700710 to 790800 to 890900 to 1,000
250 to 3001,000 to 1,100
1,110 to 1,200
1,210 to 1,300
1,310 to 1,400
1,410 to 1,500
1,510 to 1,600
1,610 to 1,700
1,710 to 1,800
1,810 to 1,900
310 to 3501,000 to 1,100
1,110 to 1,200
1,210 to 1,300
1,310 to 1,400
1,410 to 1,500
1,510 to 1,600
1,610 to 1,700
1,710 to 1,800
1,810 to 1,900
360 to 4001,000 to 1,100
1,110 to 1,200
1,210 to 1,300
1,310 to 1,400
1,410 to 1,500
Standard Free-Standing Panel Box with Configurable Size HJSA Series: Related Images

Basic Specifications

Standard Free-Standing Panel Box with Configurable Size HJSA Series: Related Images
Standard Free-Standing Panel Box with Configurable Size HJSA Series: Related Images
Part Number
HJSA-[600-1000/10]-[1000-1900/10]-[250-400/10]-[E,​G,​K]
HJSA-NS-[600-1000/10]-[1000-1900/10]-[250-400/10]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSDimension width W
(mm)
Dimension vertical H
(mm)
Dimension depth D
(mm)
Paint Coating Color
1 Piece(s) 10 Day(s) or more 10600 ~ 10001000 ~ 1900250 ~ 400Powder PaintCream (2.5Y9/1) / Gray (5Y7/1) / Approximate Munsell Value 5Y8/1
1 Piece(s) 10 Day(s) or more 10600 ~ 10001000 ~ 1900250 ~ 400Surface Preparation-

Loading...

  1. 1

Free-Standing Panel Box / Frame Configurable Size

Alterations
HJSA/FDLA/FJSA/FJTA Series

When specifying an additional work option with no drilling in the box main body
● Without drilling
· Input the additional work code at the end of the part number according to the sample order.
· Unit price of box with alterations
· Lead time
The minimum lead time of three days until shipping applies even when alterations are specified
Additional Work CodeContents of Additional WorkMachining DetailsMachining Unit Price
PDPacking includedThe packing is shipped along with the product without attaching it
HDGrid Seal Included for Intermediate PlateThe grid seal for the intermediate plate is shipped along with the product without attaching it
ANNo Internal PartsNo Grounding Terminal, Intermediate Plate or Intermediate Plate Mounting Bracket
BNNo Intermediate Plate or Intermediate Plate Mounting BracketNo Intermediate Plate or Intermediate Plate Mounting Bracket
NNNo Intermediate PlateWithout intermediate plate only
NMIntermediate plate bending4-direction bending of up to 600 mm can be done for the intermediate plate
TLDoor Opening Direction ReversedChange the opening direction of the single-opening door
*A drawing holder can also be attached for some series
*NN and NM are not available as alterations for the FDLA series
*The alteration code HD cannot be used for the HJSA and FDLA series
● With drilling
Online QuoteQuote by Email/Fax Take the product model from .

Base Rate for Additional Work

Base Rate
*Use
Quote by Email/Fax to add an alteration option at left in addition to drilling.

Online Quote Sample Unit Price for Drilling

Quotes for drilled boxes designed online are available for WOS members only.
See the quotation method details.
· Unit price of drilled box
· Lead time
The minimum lead time of three days until shipping applies even when drilling is specified

Round Hole Drilling

Round Hole SizeSize Specification UnitError Range (mm)Machining Unit Price
2.0 to 31.9 mm0.1 mm±0.2
32 to 60 mm1.0 mm+0.4
-0.2
61 to 120 mm1.0 mm+0.8
-0.2
121 mm up1.0 mm+0.8
-0.2
*The tolerance differs slightly depending on the coating film.
*Allow a space of at least 2 mm between holes drilled close together.

Boss Welding

Boss SizeEffective Screw HeightBoss Height
M47.5 mm12 mm
M56.8 mm12 mm
M815.0 mm15 mm

Square Hole Drilling

Square Hole Size (mm)5 to 30.030.1 to 60.060.1 to 130131 up
Error Range (mm)±0.2+0.3
-0.2
+0.3
-0.2
+0.3
-0.2
*The tolerance differs slightly depending on the coating film.
*Allow a space of at least 2 mm between holes drilled close together.
(Size Unit: mm)
 5 to 5051-100101-200201-300301-400
5 to 50
51 to 100
101 to 200
201 to 300
301 to 400

Quote by Email/Fax Sample Unit Price for Drilling

Send the drilling drawing to the Box Quotes Center by email or fax when requesting a quote.
Modifications such as drilling, reversing the opening direction of the door, or addition of an intermediate plate can be made.

Addition of Intermediate Plate to Box

■ Door/Side Surface Intermediate Plate
Thickness 1.6 mm, No Bending, No Grid Seal, M5 Boss Fastening
(Size Unit: mm)
Horizontal
Vertical
73 to 199200 to 299300 to 399400 to 499500 to 599600 to 672
140 to 299
300 to 399
400 to 499
500 to 599
600 to 699
700 to 799
800 to 940
■ Bottom Surface Intermediate Plate
Thickness 2.3 mm, No Bending, No Grid Seal, M8 Boss Fastening
(Size Unit: mm)
 170 to 199200-299300-399400-499500-599600-699700-799800-920
120 to 199
200-320

Alterations
HSCB/FSCB/FTCB Series

 

 

Basic Information

Material Iron Protection function (environmentally resistant) None Intermediate plate Iron Substrate
Installation Indoor Locking type Handle Strainer Yes
Main body plate thickness(mm) 1.6/2.3

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)