(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

The Misumi's unique lineup of fine flute length is available at attractive low prices

  • XAL
  • General Steel
  • 2 Flutes
XAL series carbide square end mill, 2-flute / 3D Flute Length model:Related Image
Part Number
XAL-EM2R0.3
XAL-EM2R0.5
XAL-EM2R0.6
XAL-EM2R0.8
XAL-EM2R1
XAL-EM2R1.5
XAL-EM2R2
XAL-EM2R3
XAL-EM2R4
XAL-EM2R5
XAL-EM2R6
XAL-EM2R7
XAL-EM2R8
XAL-EM2R10
XAL-EM2R12
XAL-EM2R14
XAL-EM2R16
XAL-EM2R20
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Work Material Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Processing Applications Geometry Figure
1 Piece(s)Available 8 Day(s) or more 0.3General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]0.9340Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available 8 Day(s) or more 0.5General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]1.5340Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available 8 Day(s) or more 0.6General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]1.8340Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available 8 Day(s) or more 0.8General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]2.4340Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available Same day 1General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]3445Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available Same day 1.5General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]4.5445Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available Same day 2General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]6445Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available 8 Day(s) or more 3General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]9645Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available Same day 4General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]12650Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available 8 Day(s) or more 5General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]15655Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available Same day 6General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]18660Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead2
1 Piece(s)Available 8 Day(s) or more 7General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]21860Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead1
1 Piece(s)Available Same day 8General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]24870Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead2
1 Piece(s)Available 8 Day(s) or more 10General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]301080Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead2
1 Piece(s)Available 8 Day(s) or more 12General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]361285Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead2
1 Piece(s)Available 8 Day(s) or more 14General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]421280Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead3
1 Piece(s)Available 8 Day(s) or more 16General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]4816110Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead2
1 Piece(s)Available 8 Day(s) or more 20General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[◎] / Copper Alloy[◎]6020110Flat Surface / Side Surface / Groove / Inclined CuttingWith Lead2

Loading...

  1. 1

Specifications

XAL series carbide square end mill, 2-flute / 3D Flute Length model:Related Image

Model Number     Shank Diameter
d
Flute Length
Overall Length
L
Figure Standards Y/N
Outer Diameter
D
Shank Diameter
d
Standard Sharp Edge
XAL-EM2R
(Standard)

XAL-PEM2R
(Sharp Edge)
0.1 3 0.3 40 1 No Standards
0.2 3 0.6 40 1 No Standards
0.3 3 0.9 40 1
0.4 3 1.2 40 1 No Standards
0.5 3 1.5 40 1
0.6 3 1.8 40 1
0.7 3 2.1 40 1 No Standards
0.8 3 2.4 40 1
0.9 4 2.7 45 1 No Standards
1 4 3 45 1
1.1 4 3.3 45 1 No Standards
1.2 4 3.6 45 1 No Standards
1.3 4 3.9 45 1 No Standards
1.4 4 4.2 45 1 No Standards
1.5 4 4.5 45 1
1.6 4 4.8 45 1 No Standards
1.7 4 5.1 45 1 No Standards
1.8 4 5.4 45 1 No Standards
1.9 4 5.7 45 1 No Standards
2 4 6 45 1
2.1 4 6.3 45 1 No Standards
2.2 4 6.6 45 1 No Standards
2.3 4 6.9 45 1 No Standards
2.4 4 7.2 45 1 No Standards
2.5 4 7.5 45 1 No Standards
2.6 4 7.8 45 1 No Standards
2.7 4 8.1 45 1 No Standards
2.8 4 8.4 45 1 No Standards
2.9 4 8.7 45 1 No Standards
3 4 4 9 45 1 No Standards
3 6 9 45 1
3.1 6 9.3 45 1 No Standards
3.2 6 9.6 45 1 No Standards
3.3 6 9.9 45 1 No Standards

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

Model Number     Shank Diameter
d
Flute Length
Overall Length
L
Figure Standards Y/N
Outer Diameter
D
Shank Diameter
d
Standard Sharp Edge
XAL-EM2R
(Standard)

XAL-PEM2R
(Sharp Edge)
3.4 6 10.2 45 1 No Standards
3.5 6 10.5 45 1
3.6 6 10.8 45 1 No Standards
3.7 6 11.1 45 1 No Standards
3.8 6 11.4 45 1 No Standards
3.9 6 11.7 45 1 No Standards
4 4 4 12 50 2 No Standards
4 6 12 50 1
4.1 6 12.3 50 1 No Standards
4.2 6 12.6 50 1 No Standards
4.3 6 12.9 50 1 No Standards
4.4 6 13.2 50 1 No Standards
4.5 6 13.5 50 1 No Standards
4.6 6 13.8 55 1 No Standards
4.7 6 14.1 55 1 No Standards
4.8 6 14.4 55 1 No Standards
4.9 6 14.7 55 1 No Standards
5 6 15 55 1
5.1 6 15.3 55 1 No Standards
5.2 6 15.6 55 1 No Standards
5.3 6 15.9 55 1 No Standards
5.4 6 16.2 55 1 No Standards
5.5 6 16.5 55 1 No Standards
5.6 6 16.8 60 1 No Standards
5.7 6 17.1 60 1 No Standards
5.8 6 17.4 60 1 No Standards
5.9 6 17.7 60 1 No Standards
6 6 18 60 2
6.5 8 19.5 60 1 No Standards
7 8 21 60 1
7.5 8 22.5 70 1 No Standards
8 8 24 70 2
8.5 10 25.5 70 1 No Standards
9 10 27 70 1 No Standards
9.5 10 28.5 75 1 No Standards
10 10 30 80 2
11 12 33 85 1 No Standards
12 12 36 85 2
14 12 42 80 3 No Standards
16 16 48 110 2
18 16 54 110 3 No Standards
20 20 60 110 2

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

More Information


An affordable set price that moves according to quantity from 3 pieces and up.
The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling raw materials, giving improved shape accuracy to the machined objects.
2-flute end mill with a wide operating range. Use for a variety of applications.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

 

Basic Information

Number of Flutes(sheet) 2 Model Square Coating For General Steel (AlCrN etc.)
Torsion Angle (θ) Standard Helix (30 to 40°) Additional Classification Stocked Product Tolerance of OD(mm) 0 ~ -0.02
● Inventory Product □ Manufacturer Product

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)