• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model
  • Volume Discount

A long shank type that exhibits power in deep sections of a workpiece

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

PDF

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model:Related Image

Part Number
TSC-LS-HEM3S2
TSC-LS-HEM3S2.5
TSC-LS-HEM3S3
TSC-LS-HEM3S4
TSC-LS-HEM3S5
TSC-LS-HEM3S6
TSC-LS-HEM3S7
TSC-LS-HEM3S8
TSC-LS-HEM3S8-6
TSC-LS-HEM3S9
TSC-LS-HEM3S10
TSC-LS-HEM3S10-8
TSC-LS-HEM3S11
TSC-LS-HEM3S12
TSC-LS-HEM3S12-10
TSC-LS-HEM3S13
TSC-LS-HEM3S16
TSC-LS-HEM3S17
TSC-LS-HEM3S18
TSC-LS-HEM3S20
Part NumberVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm)
Available 11 Day(s) or more 23.5680300 ~ -0.0211.9
Available 11 Day(s) or more 2.54.5680300 ~ -0.0212.4
Available 11 Day(s) or more 35680300 ~ -0.0212.9
Available 11 Day(s) or more 46680350 ~ -0.0213.8
Available 11 Day(s) or more 586100500 ~ -0.0214.8
Available 11 Day(s) or more 696120700 ~ -0.0225.7
Available 11 Day(s) or more 7126135-0 ~ -0.023-
Available 11 Day(s) or more 8128135850 ~ -0.0227.6
Available 11 Day(s) or more 8126135-0 ~ -0.023-
Available 11 Day(s) or more 9138135-0 ~ -0.023-
Available 11 Day(s) or more 1015101501000 ~ -0.0229.5
Available 11 Day(s) or more 10158150-0 ~ -0.023-
Available 11 Day(s) or more 111810160-0 ~ -0.023-
Available 11 Day(s) or more 1218121601080 ~ -0.02211.5
Available 11 Day(s) or more 121810160-0 ~ -0.023-
Available 11 Day(s) or more 132012160-0 ~ -0.023-
Available 11 Day(s) or more 1624161801200 ~ -0.02215.5
Available 11 Day(s) or more 172516180-0 ~ -0.023-
Available 11 Day(s) or more 182716180-0 ~ -0.023-
Available 11 Day(s) or more 2030202001400 ~ -0.02219.5

Loading...

  1. 1

Specifications

TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model:Related Image

Model Number     Shank Diameter
d
Flute Length
Under Neck Diameter
d1
Length Under Neck
1
Overall Length
L
Figure
Outer Diameter
D
Shank Diameter
d
TSC-LS-HEM3S 2 6 3.5 1.9 30 80 1
2.5 6 4.5 2.4 30 80 1
3 6 5 2.9 30 80 1
4 6 6 3.8 35 80 1
5 6 8 4.8 50 100 1
6 6 9 5.7 70 120 2
7 6 12 135 3
8 6 6 12 135 3
8 8 12 7.6 85 135 2
9 8 13 135 3
10 8 8 15 150 3
10 10 15 9.5 100 150 2
11 10 18 160 3
12 10 10 18 160 3
12 12 18 11.5 108 160 2
13 12 20 160 3
16 16 24 15.5 120 180 2
17 16 25 180 3
18 16 27 180 3
20 20 30 19.5 140 200 2

[ ! ] For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces (product in figure 3 only).

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 3 Model Square
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting Geometry With Lead
Torsion Angle (θ) Powerful Helix (45° to 60°) Additional Classification Stocked Product

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)