(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

PDF

TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model:Related Image

Part Number
SN-TSC-EM4S6-[17-27/1]-12
SN-TSC-EM4S6.5-[18-26/1]-13
SN-TSC-EM4S7-[19-26/1]-14
SN-TSC-EM4S7.5-[20-31/1]-15
SN-TSC-EM4S8-[21-31/1]-16
SN-TSC-EM4S8.5-[22-30/1]-17
SN-TSC-EM4S9-[23-30/1]-18
SN-TSC-EM4S9.5-[24-35/1]-19
SN-TSC-EM4S10-[25-35/1]-20
SN-TSC-EM4S12-[29-45/1]-24
SN-TSC-EM4S15-[35-48/1]-30
SN-TSC-EM4S16-[37-73/1]-32
SN-TSC-EM4S20-[45-72/1]-40
SN-TSC-PEM4S6-[17-27/1]-12
SN-TSC-PEM4S6.5-[18-26/1]-13
SN-TSC-PEM4S7-[19-26/1]-14
SN-TSC-PEM4S7.5-[20-31/1]-15
SN-TSC-PEM4S8-[21-31/1]-16
SN-TSC-PEM4S8.5-[22-30/1]-17
SN-TSC-PEM4S9-[23-30/1]-18
SN-TSC-PEM4S9.5-[24-35/1]-19
SN-TSC-PEM4S10-[25-35/1]-20
SN-TSC-PEM4S12-[29-45/1]-24
SN-TSC-PEM4S15-[35-48/1]-30
SN-TSC-PEM4S16-[37-68/1]-32
SN-TSC-PEM4S20-[45-72/1]-40
SNR-TSC-EM4S6-[17-27/1]-[5-12/1]
SNR-TSC-EM4S6.5-[18-26/1]-[5-13/1]
SNR-TSC-EM4S7-[19-31/1]-[5-14/1]
SNR-TSC-EM4S7.5-[20-31/1]-[5-15/1]
SNR-TSC-EM4S8-[15-31/1]-[4-16/1]
SNR-TSC-EM4S8.5-[22-30/1]-[5-17/1]
SNR-TSC-EM4S9-[23-35/1]-[5-18/1]
SNR-TSC-EM4S9.5-[24-35/1]-[5-19/1]
SNR-TSC-EM4S10-[25-35/1]-[5-20/1]
SNR-TSC-EM4S12-[29-45/1]-[5-24/1]
SNR-TSC-EM4S15-[35-48/1]-[5-30/1]
SNR-TSC-EM4S16-[37-68/1]-[5-32/1]
SNR-TSC-EM4S20-[45-67/1]-[5-40/1]
SNR-TSC-PEM4S6-[17-27/1]-[5-12/1]
SNR-TSC-PEM4S6.5-[18-26/1]-[5-13/1]
SNR-TSC-PEM4S7-[19-31/1]-[5-14/1]
SNR-TSC-PEM4S7.5-[20-31/1]-[5-15/1]
SNR-TSC-PEM4S8-[21-31/1]-[5-16/1]
SNR-TSC-PEM4S8.5-[22-30/1]-[5-17/1]
SNR-TSC-PEM4S9-[23-35/1]-[5-18/1]
SNR-TSC-PEM4S9.5-[24-35/1]-[5-19/1]
SNR-TSC-PEM4S10-[25-35/1]-[5-20/1]
SNR-TSC-PEM4S12-[29-45/1]-[5-24/1]
SNR-TSC-PEM4S15-[35-48/1]-[5-30/1]
SNR-TSC-PEM4S16-[37-68/1]-[5-32/1]
SNR-TSC-PEM4S20-[45-67/1]-[5-40/1]
TSC-EM4S1
TSC-EM4S1.5
TSC-EM4S2
TSC-EM4S2-6
TSC-EM4S2.5
TSC-EM4S3
TSC-EM4S3.5
TSC-EM4S4
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Geometry Additional Classification Figure ● Inventory Product □ Manufacturer Product
1 Piece(s) 10 Day(s) or more 61264517 ~ 27With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 6.51385018 ~ 26With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 71485519 ~ 26With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 7.51585520 ~ 31With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 81685521 ~ 31With LeadStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 8.517106022 ~ 30With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 918106523 ~ 30With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 9.519106524 ~ 35With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 1020106525 ~ 35With LeadStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 1224127529 ~ 45With LeadStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 1530168035 ~ 48With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 16321610537 ~ 73With LeadStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 20402011045 ~ 72With LeadStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 61264517 ~ 27Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 6.51385018 ~ 26Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 71485519 ~ 26Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 7.51585520 ~ 31Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 81685521 ~ 31Sharp CornerStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 8.517106022 ~ 30Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 918106523 ~ 30Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 9.519106524 ~ 35Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 1020106525 ~ 35Sharp CornerStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 1224127529 ~ 45Sharp CornerStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 1530168035 ~ 48Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 16321610537 ~ 68Sharp CornerStandard Neck Relief2
1 Piece(s) 10 Day(s) or more 20402011045 ~ 72Sharp CornerStandard Neck Relief1
1 Piece(s) 10 Day(s) or more 61264517 ~ 27With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 6.51385018 ~ 26With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 71485519 ~ 31With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 7.51585520 ~ 31With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 81685515 ~ 31With LeadCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 8.517106022 ~ 30With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 918106523 ~ 35With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 9.519106524 ~ 35With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 1020106525 ~ 35With LeadCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1224127529 ~ 45With LeadCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1530168035 ~ 48With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 16321610537 ~ 68With LeadCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 20402011045 ~ 67With LeadCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 61264517 ~ 27Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 6.51385018 ~ 26Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 71485519 ~ 31Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 7.51585520 ~ 31Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 81685521 ~ 31Sharp CornerCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 8.517106022 ~ 30Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 918106523 ~ 35Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 9.519106524 ~ 35Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 1020106525 ~ 35Sharp CornerCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1224127529 ~ 45Sharp CornerCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1530168035 ~ 48Sharp CornerCutting Edge R Processing1
1 Piece(s) 10 Day(s) or more 16321610537 ~ 68Sharp CornerCutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 20402011045 ~ 67Sharp CornerCutting Edge R Processing1
1 Piece(s)Available 8 Day(s) or more 12440-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 1.53440-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 24440-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 24645-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 2.55440-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 36645-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 3.57645-With LeadStocked Product1
1 Piece(s)Available 8 Day(s) or more 48645-With LeadStocked Product1

Loading...

Specifications

TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model:Related Image

Model Number     Shank Diameter
d
Flute Length
Overall Length
L
Figure
Outer Diameter
D
Shank Diameter
d
TSC-EM4S
(Standard)

TSC-PEM4S
(Sharp Edge)
1 4 2 40 1
1.5 4 3 40 1
2 4 4 40 1
2 6 6 4 45 1
2.5 4 5 40 1
3 6 6 45 1
3.5 6 7 45 1
4 6 8 45 1
4.5 6 9 45 1
5 6 10 45 1
5.5 6 11 45 2
6 6 12 45 1
6.5 8 13 50 1
7 8 14 55 1
7.5 8 15 55 1
8 8 16 55 2
8.5 10 17 60 1
9 10 18 65 1
9.5 10 19 65 1
10 10 20 65 2
12 12 24 75 2
14 12 28 75 3
15 16 30 80 1
16 16 32 105 2
18 16 36 105 3
20 20 40 110 1

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.

Basic Information

Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 4 Model Square
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Inclined Cutting Torsion Angle (θ) Standard Helix (30 to 40°)
Tolerance of OD(mm) 0 ~ -0.02

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)