(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide long neck square end mill, 4-flute / long neck model (TSC-EM4LB1-4)

TSC series carbide long neck square end mill, 4-flute / long neck model TSC-EM4LB1-4

Click this image to zoom it.

Move the mouse over the image to zoom

  • TSC series carbide long neck square end mill, 4-flute / long neck model
  • TSC series carbide long neck square end mill, 4-flute / long neck model
  • Volume Discount

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 4 Flutes

PDF

TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image

Part Number
TSC-EM4LB1-4
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)
1 Piece(s)Available 8 Day(s) or more 11.54504With LeadStandard Helix (30 to 40°)Stocked Product10.954.194.44.885.49

Loading...

  1. 1

Specifications

TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D
Length Under Neck
1
Standard Sharp Edge Flute Length
Under Neck Diameter
d1
Overall Length
L
Shank Diameter
d
Actual Effective Length Depends on Work Inclination Angle Figure
30'
1 4 1.5 0.95 50 4 4.19 4.40 4.88 5.49 1
6 6.28 6.59 7.32 8.24
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
1.2 6 1.8 1.15 50 4 6.28 6.59 7.32 8.24 1
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
16 16.75 17.58 19.53 21.97
1.3 6 No Standards 1.9 1.25 50 4 6.28 6.59 7.32 8.24 1
10 No Standards 10.47 10.99 12.21 13.73
1.4 6 No Standards 2.1 1.35 50 4 6.28 6.59 7.32 8.24 1
8 No Standards 8.38 8.79 9.76 10.98
10 No Standards 10.47 10.99 12.21 13.73
14 No Standards 14.66 15.39 17.09 19.22


Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D
Length Under Neck
1
Standard Sharp Edge Flute Length
Under Neck Diameter
d1
Overall Length
L
Shank Diameter
d
Actual Effective Length Depends on Work Inclination Angle Figure
30'
1.5 6 2.3 1.45 50 4 6.28 6.59 7.32 8.24 1
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
14 14.66 15.39 17.09 19.22
16 16.75 17.58 19.53 21.97
18 70 18.85 19.78 21.97 24.71
20 20.94 21.98 24.41 Without Interference
1.6 6 No Standards 2.4 1.55 50 4 6.28 6.59 7.32 8.24 1
8 No Standards 8.38 8.79 9.76 10.98
10 No Standards 10.47 10.99 12.21 13.73
12 No Standards 12.57 13.19 14.65 16.48
14 No Standards 14.66 15.39 17.09 19.22
1.7 6 No Standards 2.5 1.65 50 4 6.28 6.59 7.32 8.24 1
16 No Standards 16.75 17.58 19.53 21.97
1.8 6 No Standards 2.7 1.75 50 4 6.28 6.59 7.32 8.24 1
8 No Standards 8.38 8.79 9.76 10.98
10 No Standards 10.47 10.99 12.21 13.73
12 No Standards 12.57 13.19 14.65 16.48
14 No Standards 14.66 15.39 17.09 19.22
16 No Standards 16.75 17.58 19.53 Without Interference
20 No Standards 70 20.94 21.98 24.41 Without Interference
25 No Standards 26.18 27.47 30.51 Without Interference
2 6 3 1.95 50 4 6.28 6.59 7.32 8.24 1
8 8.38 8.79 9.76 10.98
10 10.47 10.99 12.21 13.73
12 12.57 13.19 14.65 16.48
14 14.66 15.39 17.09 19.22
16 16.75 17.58 19.53 Without Interference
18 70 18.85 19.78 21.97 Without Interference
20 20.94 21.98 24.41 Without Interference
25 26.18 27.47 Without Interference Without Interference
30 31.41 32.97 Without Interference Without Interference
2.5 8 3.8 2.4 50 4 8.38 8.79 9.76 10.98 1
12 12.57 13.19 14.65 Without Interference
16 16.75 17.58 19.53 Without Interference
20 70 20.94 21.98 Without Interference Without Interference
25 26.18 27.47 Without Interference Without Interference


Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)

Outer Diameter
D
Length Under Neck
1
Standard Sharp Edge Flute Length
Under Neck Diameter
d1
Overall Length
L
Shank Diameter
d
Actual Effective Length Depends on Work Inclination Angle Figure
30'
3 8 No Standards 4.5 2.9 50 6 8.38 8.79 9.76 10.98 1
12 12.57 13.19 14.65 16.48
16 70 16.75 17.58 19.53 21.97
20 20.94 21.98 24.41 27.46
25 26.18 27.47 30.51 Without Interference
30 31.41 32.97 36.62 Without Interference
40 100 41.88 43.96 Without Interference Without Interference
3.5 16 No Standards 5.5 3.35 70 6 16.75 17.58 19.53 21.97 1
25 No Standards 26.18 27.47 30.51 Without Interference
35 No Standards 100 36.65 38.46 Without Interference Without Interference
4 12 No Standards 6 3.8 50 6 12.57 13.19 14.65 16.48 1
16 16.75 17.58 19.53 Without Interference
20 70 20.94 21.98 24.41 Without Interference
30 31.41 32.97 Without Interference Without Interference
35 No Standards 100 36.65 38.46 Without Interference Without Interference
40 41.88 43.96 Without Interference Without Interference
45 No Standards 47.12 49.45 Without Interference Without Interference
50 No Standards 52.35 54.95 Without Interference Without Interference
5 16 7.5 4.8 70 6 16.75 17.58 Without Interference Without Interference 1
25 26.18 27.47 Without Interference Without Interference
35 100 36.65 Without Interference Without Interference Without Interference
50 52.35 Without Interference Without Interference Without Interference
6 20 9 5.8 70 6 Without Interference Without Interference Without Interference Without Interference 2
30 Without Interference Without Interference Without Interference Without Interference
40 100 Without Interference Without Interference Without Interference Without Interference
50 Without Interference Without Interference Without Interference Without Interference


Model Number
LN-TSC-PEM4S (Sharp Edge / Manufactured Product) / EM4S (Standard / Manufactured Product)

Outer Diameter
D
Length Under Neck ℓ1
1 mm Increment Designation
Standard Sharp Edge Flute Length
Under Neck Diameter
d1
Overall Length
L
Shank Diameter
d
Figure
1.5 8 ~ 20 3 1.45 40 4 3
2 9 ~ 21 4 1.95 40 4 3
2.5 10 ~ 22 5 2.4 40 4 3
3 11 ~ 21 6 2.9 45 6 3
3.5 12 ~ 22 7 3.3 45 6 3
4 13 ~ 23 8 3.8 45 6 3
5 15 ~ 25 10 4.8 45 6 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.

More Information


The ideal under-neck length can be selected for workpiece machining in deep areas.
It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


TSC series carbide long neck square end mill, 4-flute / long neck model:Related Image

Basic Information

Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 4 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Inclined Cutting Tolerance of OD(mm) 0 ~ -0.02

Please check the type/dimensions/specifications of the part TSC-EM4LB1-4 in the TSC series carbide long neck square end mill, 4-flute / long neck model series.

Products like this...

Part Number
TSC-EM4LB1-10
TSC-EM4LB1-12
TSC-EM4LB1-6
TSC-EM4LB1-8
TSC-EM4LB1.2-10
TSC-EM4LB1.2-12
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm)
Actual Effective Length Depends on Work Inclination Angle 30'
(mm)
Actual Effective Length Depends on Work Inclination Angle 1°
(mm)
Actual Effective Length Depends on Work Inclination Angle 2°
(mm)
Actual Effective Length Depends on Work Inclination Angle 3°
(mm)
1 Piece(s)Available 8 Day(s) or more 11.545010With LeadStandard Helix (30 to 40°)Stocked Product10.9510.4710.9912.2113.73
1 Piece(s)Available 8 Day(s) or more 11.545012With LeadStandard Helix (30 to 40°)Stocked Product10.9512.5713.1914.6516.48
1 Piece(s)Available 8 Day(s) or more 11.54506With LeadStandard Helix (30 to 40°)Stocked Product10.956.286.597.328.24
1 Piece(s)Available 8 Day(s) or more 11.54508With LeadStandard Helix (30 to 40°)Stocked Product10.958.388.799.7610.98
1 Piece(s)Available 8 Day(s) or more 1.21.845010With LeadStandard Helix (30 to 40°)Stocked Product11.1510.4710.9912.2113.73
1 Piece(s)Available 8 Day(s) or more 1.21.845012With LeadStandard Helix (30 to 40°)Stocked Product11.1512.5713.1914.6516.48

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)