(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

The high precision high helical end mill for shrink fit holder is ideal for side finishing

  • TS
  • General Steel
  • Multi-Flutes (5 ~)
  • B (Stub)

PDF

TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model:Related Image
Part Number
TSC-SHP-PSXB3
TSC-SHP-PSXB4
TSC-SHP-PSXB5
TSC-SHP-PSXB6
TSC-SHP-PSXB8
TSC-SHP-PSXB10
TSC-SHP-PSXB12
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Tolerance of OD
(mm)
Figure
1 Piece(s)Available 8 Day(s) or more 34.54650-0.01 ~ -0.0351
1 Piece(s)Available 8 Day(s) or more 464650-0.01 ~ -0.0351
1 Piece(s)Available 8 Day(s) or more 57.54650-0.01 ~ -0.0351
1 Piece(s)Available 8 Day(s) or more 696650-0.01 ~ -0.0352
1 Piece(s)Available 8 Day(s) or more 8126865-0.01 ~ -0.0352
1 Piece(s)Available 8 Day(s) or more 101561070-0.01 ~ -0.0352
1 Piece(s)Available 8 Day(s) or more 121861275-0.01 ~ -0.0452

Loading...

  1. 1

Specifications

TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Number of Flutes Figure
Outer Diameter
D
TSC-SHP-PSXB 3 4.5 50 6 4 1
4 6 50 6 4 1
5 7.5 50 6 4 1
6 9 50 6 6 2
8 12 65 8 6 2
10 15 70 10 6 2
12 18 75 12 6 2


For Cutting Conditions, Refer to >>Click here.

More Information


It is designed to have an ideal flute length, shank length and overall length, keeping in mind the usage of a shrink fit holder for processing.
Blade runout accuracy within 5 μm (our measured ratio) / back taper within 5 μm / shank diameter, tolerance h5 standard, has been adopted for a high quality tool with minimal quality variation. It is
ideal for side-finishing machining requiring high accuracy.
Designed to have a blade shape with emphasis on sharpness thanks to the positive blade / sharp edge tip, it is suitable for machining raw materials of carbon steel, etc.
The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it delivers excellent durability when used in carbon steel raw materials, in addition to heat treated steel.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Model Highly-Helical Coating For High Hardness (Silicone-Based)
Processing Applications Flat Surface / Side Surface / Inclined Cutting Geometry Sharp Corner Torsion Angle (θ) Powerful Helix (45° to 60°)
Additional Classification Stocked Product ● Inventory Product □ Manufacturer Product

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)