(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model (TSC-PSXS5)

TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model TSC-PSXS5
  • Volume Discount

The strong helix of positive blade is ideal in the standing-wall finishing of raw materials

  • TS
  • General Steel
  • Multi-Flutes (5 ~)
  • S (Short)

PDF

TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model:Related Image
Part Number
TSC-PSXS5
Part NumberVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Processing Applications Additional Classification Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
Available 9 Day(s) or more 5104660-Flat Surface / Side Surface / Inclined CuttingStocked Product-0.020 ~ -0.0381

Loading...

  1. 1

Specifications

TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Number of Flutes Figure
Outer Diameter
D
TSC-PSXS 1 2 60 6 4 1
2 4 60 6 4 1
3 6 60 6 4 1
4 8 60 6 4 1
5 10 60 6 4 1
6 12 60 6 6 2
8 16 75 8 6 2
10 20 80 10 6 2
12 24 100 12 6 2


For Cutting Conditions, Refer to >>Click here.

More Information


The positive finish of the rake angle, sharp edge processing of the bottom blade corners and 53° strong twist deliver strength when finishing pocket vertical wall surfaces of mold bases (holding blocks), and when machining raw materials, heat-treated steel and aluminum.
The TS film coating with much greater oxidation resistance and hardness than conventional films exhibits excellent durability, even with raw carbon steel materials, in addition to heat-treated steel.
The tool has a high rigidity, reducing the chances of tool breakage to a minimum when cutting side surfaces.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Model Highly-Helical Coating For High Hardness (Silicone-Based)
Geometry Sharp Corner Torsion Angle (θ) Powerful Helix (45° to 60°)

Please check the type/dimensions/specifications of the part TSC-PSXS5 in the TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model series.

Products like this...

Part Number
TSC-PSXS12
TSC-PSXS2
TSC-PSXS3
TSC-PSXS4
TSC-PSXS6
TSC-PSXS8
Part NumberVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Processing Applications Additional Classification Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
Available 9 Day(s) or more 1224612100-Inclined Cutting / Flat Surface / Side SurfaceStocked Product-0.032 ~ -0.0592
Available 9 Day(s) or more 244660-Inclined Cutting / Flat Surface / Side SurfaceStocked Product-0.014 ~ -0.0281
Available 9 Day(s) or more 364660-Inclined Cutting / Flat Surface / Side SurfaceStocked Product-0.014 ~ -0.0281
Available 9 Day(s) or more 484660-Inclined Cutting / Flat Surface / Side SurfaceStocked Product-0.020 ~ -0.0381
Available 9 Day(s) or more 6126660-Inclined Cutting / Flat Surface / Side SurfaceStocked Product-0.020 ~ -0.0382
Available 9 Day(s) or more 8166875-Inclined Cutting / Flat Surface / Side SurfaceStocked Product-0.025 ~ -0.0452

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)