(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

(Economy series) XAL series carbide ball end mill, 2-flute / short model

(Economy series) XAL series carbide ball end mill, 2-flute / short model

Click this image to zoom it.

Move the mouse over the image to zoom

  • On Sale Till 31/03/2024
  • Volume Discount

XAL Series is the definitive choice for cost-sensitive customers

  • XAL
  • General Steel
  • 2 Flutes
XAL series carbide ball end mill, 2-flute / short model:Related Image
Part Number
SN-XAL-BEM2S3-[17-72/1]-12
SN-XAL-BEM2S3.5-[17-36/1]-12
SN-XAL-BEM2S4-[19-76/1]-14
SN-XAL-BEM2S4.5-[19-40/1]-14
SN-XAL-BEM2S5-10-100-[23-70/1]-18
SN-XAL-BEM2S5-[20-40/1]-15
SN-XAL-BEM2S5.5-[20-50/1]-15
SN-XAL-BEM2S6-12-110-[30-74/1]-25
SN-XAL-BEM2S6-[30-45/1]-25
SN-XAL-BEM2S8-[35-92/1]-30
SN-XAL-BEM2S10-[43-100/1]-38
SNR-XAL-BEM2S3-[17-72/1]-[5-12/1]
SNR-XAL-BEM2S3.5-[17-36/1]-[5-12/1]
SNR-XAL-BEM2S4-[19-76/1]-[5-14/1]
SNR-XAL-BEM2S4.5-[19-40/1]-[5-14/1]
SNR-XAL-BEM2S5-10-100-[23-70/1]-[5-18/1]
SNR-XAL-BEM2S5-[20-40/1]-[5-15/1]
SNR-XAL-BEM2S5.5-[20-50/1]-[5-15/1]
SNR-XAL-BEM2S6-12-110-[30-74/1]-[5-25/1]
SNR-XAL-BEM2S6-[30-45/1]-[5-25/1]
SNR-XAL-BEM2S8-[35-92/1]-[10-30/1]
XAL-BEM2S0.05
XAL-BEM2S0.1
XAL-BEM2S0.1-6
XAL-BEM2S0.2
XAL-BEM2S0.2-3
XAL-BEM2S0.2-6
XAL-BEM2S0.3
XAL-BEM2S0.3-3
XAL-BEM2S0.3-6
XAL-BEM2S0.4
XAL-BEM2S0.4-3
XAL-BEM2S0.4-6
XAL-BEM2S0.5
XAL-BEM2S0.5-6
XAL-BEM2S0.6
XAL-BEM2S0.7
XAL-BEM2S0.8
XAL-BEM2S0.9
XAL-BEM2S0.15
XAL-BEM2S0.25
XAL-BEM2S0.25-3
XAL-BEM2S0.35
XAL-BEM2S0.45
XAL-BEM2S0.55
XAL-BEM2S0.65
XAL-BEM2S0.75
XAL-BEM2S0.75-6
XAL-BEM2S0.85
XAL-BEM2S1
XAL-BEM2S1-4-60
XAL-BEM2S1-6
XAL-BEM2S1.05
XAL-BEM2S1.1
XAL-BEM2S1.2
XAL-BEM2S1.3
XAL-BEM2S1.4
XAL-BEM2S1.5
XAL-BEM2S1.5-6-60
XAL-BEM2S1.6
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSR Size
(mm)
Model Work Material Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Coating Overall Length (L)
(mm)
Shank Diameter (d)
(mm)
R Precision
(μm)
Processing Applications Inventory Classification Outer Diameter D
(mm)
Torsion Availability Figure Length Under Neck (θ)
(Degree)
1 Piece(s) 10 Day(s) or more -3-----906---6---
1 Piece(s) 10 Day(s) or more -3.5-----608---7---
1 Piece(s) 10 Day(s) or more -4-----1008---8---
1 Piece(s) 10 Day(s) or more -4.5-----7010---9---
1 Piece(s) 10 Day(s) or more -5-----10010---10---
1 Piece(s) 10 Day(s) or more -5-----7010---10---
1 Piece(s) 10 Day(s) or more -5.5-----8012---11---
1 Piece(s) 10 Day(s) or more -6-----11012---12---
1 Piece(s) 10 Day(s) or more -6-----7512---12---
1 Piece(s) 10 Day(s) or more -8-----14016---16---
1 Piece(s) 10 Day(s) or more -10-----16020---20---
1 Piece(s) 10 Day(s) or more -3-----906---6---
1 Piece(s) 10 Day(s) or more -3.5-----608---7---
1 Piece(s) 10 Day(s) or more -4-----1008---8---
1 Piece(s) 10 Day(s) or more -4.5-----7010---9---
1 Piece(s) 10 Day(s) or more -5-----10010---10---
1 Piece(s) 10 Day(s) or more -5-----7010---10---
1 Piece(s) 10 Day(s) or more -5.5-----8012---11---
1 Piece(s) 10 Day(s) or more -6-----11012---12---
1 Piece(s) 10 Day(s) or more -6-----7512---12---
1 Piece(s) 10 Day(s) or more -8-----14016---16---
1 Piece(s)Available 8 Day(s) or more -0.05BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.22For General Steel (AlCrN etc.)403±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.1Included1-
1 Piece(s)Available 8 Day(s) or more -0.1BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.42For General Steel (AlCrN etc.)403±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.2Included1-
1 Piece(s)Available 8 Day(s) or more -0.1BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.42For General Steel (AlCrN etc.)506±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.2Included1-
1 Piece(s)Available 8 Day(s) or more -0.2BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.82For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.4Included115°
1 Piece(s)Available 8 Day(s) or more -0.2--0.8--403---0.4---
1 Piece(s)Available 8 Day(s) or more -0.2BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.82For General Steel (AlCrN etc.)506±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.4Included1-
1 Piece(s)Available Same day -0.3BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.22For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.6Included115°
1 Piece(s)Available 8 Day(s) or more -0.3--1.2--403---0.6---
1 Piece(s)Available 8 Day(s) or more -0.3BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.22For General Steel (AlCrN etc.)506±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.6Included1-
1 Piece(s)Available 8 Day(s) or more -0.4BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]22For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.8Included115°
1 Piece(s)Available 8 Day(s) or more -0.4--1.6--403---0.8---
1 Piece(s)Available 8 Day(s) or more -0.4BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.62For General Steel (AlCrN etc.)506±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.8Included1-
1 Piece(s)Available Same day -0.5BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]22For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1Included115°
1 Piece(s)Available 8 Day(s) or more -0.5BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]2.52For General Steel (AlCrN etc.)606±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1Included115°
1 Piece(s)Available 8 Day(s) or more -0.6BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.2Included115°
1 Piece(s)Available 8 Day(s) or more -0.7BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]2.82For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.4Included1-
1 Piece(s)Available 8 Day(s) or more -0.8BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.6Included1-
1 Piece(s)Available 8 Day(s) or more -0.9BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.8Included1-
1 Piece(s)Available 8 Day(s) or more -0.15BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.62For General Steel (AlCrN etc.)403±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.3Included1-
1 Piece(s)Available 8 Day(s) or more -0.25BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.12For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.5Included115°
1 Piece(s)Available 8 Day(s) or more -0.25--1.1--403---0.5---
1 Piece(s)Available 8 Day(s) or more -0.35BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.42For General Steel (AlCrN etc.)403±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.7Included1-
1 Piece(s)Available 8 Day(s) or more -0.45BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.82For General Steel (AlCrN etc.)403±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product0.9Included1-
1 Piece(s)Available 8 Day(s) or more -0.55BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]2.22For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.1Included1-
1 Piece(s)Available 8 Day(s) or more -0.65BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]2.62For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.3Included1-
1 Piece(s)Available Same day -0.75BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.5Included115°
1 Piece(s)Available 8 Day(s) or more -0.75BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)506±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.5Included1-
1 Piece(s)Available 8 Day(s) or more -0.85BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product1.7Included1-
1 Piece(s)Available Same day 101BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]42For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2Included115°
1 Piece(s)Available 8 Day(s) or more -1BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]62For General Steel (AlCrN etc.)604±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2Included115°
1 Piece(s)Available 8 Day(s) or more -1BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]52For General Steel (AlCrN etc.)506±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2Included115°
1 Piece(s)Available 8 Day(s) or more -1.05BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2.1Included1-
1 Piece(s)Available 8 Day(s) or more -1.1BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2.2Included1-
1 Piece(s)Available 8 Day(s) or more -1.2BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]32For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2.4Included1-
1 Piece(s)Available 8 Day(s) or more -1.3BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3.52For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2.6Included1-
1 Piece(s)Available 8 Day(s) or more -1.4BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3.52For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product2.8Included1-
1 Piece(s)Available Same day -1.5BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]62For General Steel (AlCrN etc.)504±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product3Included115°
1 Piece(s)Available 8 Day(s) or more -1.5BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]62For General Steel (AlCrN etc.)606±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product3Included115°
1 Piece(s)Available 8 Day(s) or more -1.6BoreGeneral Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]42For General Steel (AlCrN etc.)404±0.005Curved Surface / Side Surface / Carving / R-GrooveStocked Product3.2Included1-

Loading...

Specifications

XAL series carbide ball end mill, 2-flute / short model:Related Image

Model Number       Shank Diameter
d
Overall Length
L
Outer Diameter
D
Flute Length
Figure
Tip
R
Shank Diameter
d
Overall Length
L
XAL-BEM2S 0.05 - - 3 40 0.1 0.2 1
0.1 - - 3 40 0.2 0.4 1
0.1 6 - 6 50 0.2 0.4 1
0.15 - - 3 40 0.3 0.6 1
0.2 - - 4 50 0.4 0.8 1
0.2 6 - 6 50 0.4 0.8 1
0.25 - - 4 50 0.5 1.1 1
0.3 - - 4 50 0.6 1.2 1
0.3 6 - 6 50 0.6 1.2 1
0.35 - - 3 40 0.7 1.4 1
0.4 - - 4 50 0.8 2 1
0.4 6 - 6 50 0.8 1.6 1
0.45 - - 3 40 0.9 1.8 1
0.5 - - 4 50 1 2 1
0.5 6 - 6 60 1 2.5 1
0.55 - - 4 40 1.1 2.2 1
0.6 - - 4 50 1.2 3 1
0.65 - - 4 40 1.3 2.6 1
0.7 - - 4 40 1.4 2.8 1
0.75 - - 4 50 1.5 3 1
0.75 6 - 6 50 1.5 3 1
0.8 - - 4 40 1.6 3 1
0.85 - - 4 40 1.7 3 1
0.9 - - 4 40 1.8 3 1
1 - - 4 50 2 4 1
1 6 - 6 50 2 5 1
1 4 60 4 60 2 6 1
1.05 - - 4 40 2.1 3 1
1.1 - - 4 40 2.2 3 1
1.15 - - 4 40 2.3 3 1
1.2 - - 4 40 2.4 3 1
1.25 - - 4 50 2.5 6 1

[ ! ]For shank diameter (d) and overall length (L) specifications listed in blue, specify a tip (R), shank diameter (d) and overall length (L).

Model Number   Shank Diameter
d
Overall Length
L
Outer Diameter
D
Flute Length
Figure
Tip
R
Shank Diameter
d
Overall Length
L
XAL-BEM2S 1.3 - -

4

40

2.6 3.5 1
1.4 - -

4

40

2.8 3.5 1
1.45 - -

4

40

2.9 3.5 1
1.5 - -

4

50

3 6 1
1.5 6

60

6

60

3 6 1
1.55 - -

4

40

3.1 4 1
1.6 - -

4

40

3.2 4 1
1.65 - -

4

40

3.3 4 1
1.7 - -

4

40

3.4 4 1
1.75 - -

4

40

3.5 5 1
1.8 - -

4

40

3.6 5 1
1.9 - -

4

40

3.8 5 1
2 - -

4

50

4 8 2
2 6 -

6

70

4 8 1
2.15 - -

6

50

4.3 6 1
2.2 - -

6

50

4.4 6 1
2.3 - -

6

50

4.6 6 1
2.4 - -

6

50

4.8 6 1
2.5 - -

6

50

5 10 1
2.5 6

80

6

80

5 12 1
2.6 - -

6

50

5.2 8 1
2.75 - -

6

50

5.5 8 1
3 - -

6

90

6 12 2
3.5 - -

8

60

7 12 1
4 - -

8

100

8 14 2
4.5 - -

10

70

9 14 1
5 - -

10

70

10 15 2
5 10

100

10

100

10 18 2
5.5 - -

12

80

11 15 1
6 - -

12

75

12 25 2
6 12

110

12

110

12 25 2
7 - -

12

80

14 15 3
8 - -

16

140

16 30 2
10 - -

20

160

20 38 2

[ ! ]For shank diameter (d) and overall length (L) specifications listed in blue, specify a tip (R), shank diameter (d) and overall length (L).

More Information


The XAL series exhibits stable wear-resistant performance when milling raw materials.
It delivers high cost performance for pre-hardened steel, aluminum, and copper alloys.
The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.

 

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)