(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

PDF

TSC series carbide radius end mill, 3-flute, 45° spiral / short model:Related Image
Part Number
SN-TSC-CR-HEM3S6-R0.3-[18-42/1]-13
SN-TSC-CR-HEM3S6-R0.5-[18-42/1]-13
SN-TSC-CR-HEM3S6-R1-[18-42/1]-13
SN-TSC-CR-HEM3S6-R1.5-[18-42/1]-13
SN-TSC-CR-HEM3S8-R0.3-[24-51/1]-19
SN-TSC-CR-HEM3S8-R0.5-[24-51/1]-19
SN-TSC-CR-HEM3S8-R1-[24-51/1]-19
SN-TSC-CR-HEM3S8-R1.5-[24-51/1]-19
SN-TSC-CR-HEM3S10-R0.3-[27-50/1]-22
SN-TSC-CR-HEM3S10-R0.5-[27-50/1]-22
SN-TSC-CR-HEM3S10-R1-[27-50/1]-22
SN-TSC-CR-HEM3S10-R1.5-[27-50/1]-22
SN-TSC-CR-HEM3S10-R2-[27-50/1]-22
SN-TSC-CR-HEM3S12-R0.3-[31-70/1]-26
SN-TSC-CR-HEM3S12-R0.5-[31-70/1]-26
SN-TSC-CR-HEM3S12-R1-[31-70/1]-26
SN-TSC-CR-HEM3S12-R1.5-[31-70/1]-26
SN-TSC-CR-HEM3S12-R2-[31-70/1]-26
SNR-TSC-CR-HEM3S6-R0.3-[18-42/1]-[5-13/1]
SNR-TSC-CR-HEM3S6-R0.5-[18-42/1]-[5-13/1]
SNR-TSC-CR-HEM3S6-R1-[18-42/1]-[5-13/1]
SNR-TSC-CR-HEM3S6-R1.5-[18-42/1]-[5-13/1]
SNR-TSC-CR-HEM3S8-R0.3-[24-51/1]-[5-19/1]
SNR-TSC-CR-HEM3S8-R0.5-[24-51/1]-[5-19/1]
SNR-TSC-CR-HEM3S8-R1-[24-51/1]-[5-19/1]
SNR-TSC-CR-HEM3S8-R1.5-[24-51/1]-[5-19/1]
SNR-TSC-CR-HEM3S10-R0.3-[27-50/1]-[5-22/1]
SNR-TSC-CR-HEM3S10-R0.5-[27-50/1]-[5-22/1]
SNR-TSC-CR-HEM3S10-R1-[27-50/1]-[5-22/1]
SNR-TSC-CR-HEM3S10-R1.5-[27-50/1]-[5-22/1]
SNR-TSC-CR-HEM3S10-R2-[27-50/1]-[5-22/1]
SNR-TSC-CR-HEM3S12-R0.3-[31-70/1]-[5-26/1]
SNR-TSC-CR-HEM3S12-R0.5-[31-70/1]-[5-26/1]
SNR-TSC-CR-HEM3S12-R1-[31-70/1]-[5-26/1]
SNR-TSC-CR-HEM3S12-R1.5-[31-70/1]-[5-26/1]
SNR-TSC-CR-HEM3S12-R2
TSC-CR-HEM3S3-R0.3
TSC-CR-HEM3S3-R0.5
TSC-CR-HEM3S4-R0.3
TSC-CR-HEM3S4-R0.5
TSC-CR-HEM3S5-R0.3
TSC-CR-HEM3S5-R0.5
TSC-CR-HEM3S6-R0.3
TSC-CR-HEM3S6-R0.5
TSC-CR-HEM3S6-R1
TSC-CR-HEM3S6-R1.5
TSC-CR-HEM3S8-R0.3
TSC-CR-HEM3S8-R0.5
TSC-CR-HEM3S8-R1
TSC-CR-HEM3S8-R1.5
TSC-CR-HEM3S10-R0.3
TSC-CR-HEM3S10-R0.5
TSC-CR-HEM3S10-R1
TSC-CR-HEM3S10-R1.5
TSC-CR-HEM3S10-R2
TSC-CR-HEM3S12-R0.3
TSC-CR-HEM3S12-R0.5
TSC-CR-HEM3S12-R1
TSC-CR-HEM3S12-R1.5
TSC-CR-HEM3S12-R2
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
R Size
(mm)
Flute Length (ℓ)
(mm)
Overall Length (L)
(mm)
Shank Diameter (d)
(mm)
Length Under Neck (ℓ1)
(mm)
Additional Classification Figure
1 Piece(s) 10 Day(s) or more 60.31360618 ~ 42Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 60.51360618 ~ 42Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 611360618 ~ 42Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 61.51360618 ~ 42Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 80.31975824 ~ 51Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 80.51975824 ~ 51Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 811975824 ~ 51Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 81.51975824 ~ 51Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 100.322801027 ~ 50Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 100.522801027 ~ 50Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 10122801027 ~ 50Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 101.522801027 ~ 50Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 10222801027 ~ 50Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 120.3261001231 ~ 70Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 120.5261001231 ~ 70Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 121261001231 ~ 70Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 121.5261001231 ~ 70Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 122261001231 ~ 70Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 60.35 ~ 1360618 ~ 42Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 60.55 ~ 1360618 ~ 42Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 615 ~ 1360618 ~ 42Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 61.55 ~ 1360618 ~ 42Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 80.35 ~ 1975824 ~ 51Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 80.55 ~ 1975824 ~ 51Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 815 ~ 1975824 ~ 51Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 81.55 ~ 1975824 ~ 51Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 100.35 ~ 22801027 ~ 50Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 100.55 ~ 22801027 ~ 50Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1015 ~ 22801027 ~ 50Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 101.55 ~ 22801027 ~ 50Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1025 ~ 22801027 ~ 50Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 120.35 ~ 261001231 ~ 70Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 120.55 ~ 261001231 ~ 70Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1215 ~ 261001231 ~ 70Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 121.55 ~ 261001231 ~ 70Cutting Edge R Processing2
1 Piece(s)Available 10 Day(s) or more 122-10012-Cutting Edge R Processing2
1 Piece(s)Available 8 Day(s) or more 30.38606-Stocked Product1
1 Piece(s)Available 8 Day(s) or more 30.58606-Stocked Product1
1 Piece(s)Available 8 Day(s) or more 40.311606-Stocked Product1
1 Piece(s)Available 8 Day(s) or more 40.511606-Stocked Product1
1 Piece(s)Available 8 Day(s) or more 50.313606-Stocked Product1
1 Piece(s)Available 8 Day(s) or more 50.513606-Stocked Product1
1 Piece(s)Available 8 Day(s) or more 60.313606-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 60.513606-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 6113606-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 61.513606-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 80.319758-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 80.519758-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 8119758-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 81.519758-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 100.3228010-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 100.5228010-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 101228010-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 101.5228010-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 102228010-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 120.32610012-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 120.52610012-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 1212610012-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 121.52610012-Stocked Product2
1 Piece(s)Available 8 Day(s) or more 1222610012-Stocked Product2

Loading...

  1. 1

Specifications

TSC series carbide radius end mill, 3-flute, 45° spiral / short model:Related Image

Model Number
TSC-CR-HEM3S (Stocked Product) / T-TSC-HEM3S (Manufactured Product)

Outer Diameter
D
Radius R Select (Stocked Product)
CR 0.1 mm
Increment Designation( Manufactured
Product )
Flute Length
Overall Length
L
Shank Diameter
d
Figure ● Stocked Product
□ Manufactured Product
3 0.3 0.5 8 60 6 1
4 0.3 0.5 11 60 6 1
0.1 ~ 0.4
5 0.3 0.5 13 60 6 1
0.1 ~ 0.4
6 0.3 0.5 1 1.5 13 60 6 2
0.1 ~ 0.9
7 0.1 ~ 1.0 16 70 8 1
7.5 0.1 ~ 1.0 16 70 8 1
8 0.3 0.5 1 1.5 19 75 8 2
0.1 ~ 1.4
9 0.1 ~ 1.5 19 80 10 1
10 0.3 0.5 1 1.5 2 22 80 10 2
0.1 ~ 1.9
11 0.1 ~ 2.0 22 100 12 1
12 0.3 0.5 1 1.5 2 26 100 12 2
0.1 ~ 2.5
16 0.1 ~ 3.0 32 105 16 2
20 0.1 ~ 3.0 38 110 20 2

[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.

For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 3 Model Radius
Processing Applications Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Powerful Helix (45° to 60°)
R Precision(μm) ±0.01

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)