(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide radius end mill, 2-flute / short model

TSC series carbide radius end mill, 2-flute / short model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

PDF

TSC series carbide radius end mill, 2-flute / short model:Related Image

Part Number
SN-TSC-CR-EM2S6-R0.2-[17-27/1]-12
SN-TSC-CR-EM2S6-R0.3-[17-27/1]-12
SN-TSC-CR-EM2S6-R0.5-[17-27/1]-12
SN-TSC-CR-EM2S6-R1-[17-27/1]-12
SN-TSC-CR-EM2S6-R1.5-[17-27/1]-12
SN-TSC-CR-EM2S6-R2-[17-27/1]-12
SN-TSC-CR-EM2S8-R0.2-[21-31/1]-16
SN-TSC-CR-EM2S8-R0.3-[21-31/1]-16
SN-TSC-CR-EM2S8-R0.5-[21-31/1]-16
SN-TSC-CR-EM2S8-R1-[21-31/1]-16
SN-TSC-CR-EM2S10-R0.5-[25-35/1]-20
SN-TSC-CR-EM2S10-R1-[25-35/1]-20
SN-TSC-CR-EM2S10-R1.5-[25-35/1]-20
SN-TSC-CR-EM2S10-R2-[25-35/1]-20
SN-TSC-CR-EM2S10-R3-[25-35/1]-20
SN-TSC-CR-EM2S12-R0.5-[29-45/1]-24
SN-TSC-CR-EM2S12-R1-[29-45/1]-24
SN-TSC-CR-EM2S12-R1.5-[29-45/1]-24
SN-TSC-CR-EM2S12-R2-[29-45/1]-24
SNR-TSC-CR-EM2S6-R0.2-[17-27/1]-[5-12/1]
SNR-TSC-CR-EM2S6-R0.3-[17-27/1]-[5-12/1]
SNR-TSC-CR-EM2S6-R0.5-[17-27/1]-[5-12/1]
SNR-TSC-CR-EM2S6-R1-[17-27/1]-[5-12/1]
SNR-TSC-CR-EM2S6-R1.5-[17-27/1]-[5-12/1]
SNR-TSC-CR-EM2S6-R2-[17-27/1]-[5-12/1]
SNR-TSC-CR-EM2S8-R0.2-[21-31/1]-[5-16/1]
SNR-TSC-CR-EM2S8-R0.3-[21-31/1]-[5-16/1]
SNR-TSC-CR-EM2S8-R0.5-[21-31/1]-[5-16/1]
SNR-TSC-CR-EM2S8-R1-[21-31/1]-[5-16/1]
SNR-TSC-CR-EM2S10-R0.5-[25-35/1]-[5-20/1]
SNR-TSC-CR-EM2S10-R1-[25-35/1]-[5-20/1]
SNR-TSC-CR-EM2S10-R1.5-[25-35/1]-[5-20/1]
SNR-TSC-CR-EM2S10-R2-[25-35/1]-[5-20/1]
SNR-TSC-CR-EM2S10-R3-[25-35/1]-[5-20/1]
SNR-TSC-CR-EM2S12-R0.5-[29-45/1]-[5-24/1]
SNR-TSC-CR-EM2S12-R1-[29-45/1]-[5-24/1]
SNR-TSC-CR-EM2S12-R1.5-[29-45/1]-[5-24/1]
SNR-TSC-CR-EM2S12-R2-[29-45/1]-[5-24/1]
TSC-CR-EM2S1-R0.1
TSC-CR-EM2S1-R0.2
TSC-CR-EM2S1-R0.3
TSC-CR-EM2S1.5-R0.1
TSC-CR-EM2S1.5-R0.2
TSC-CR-EM2S1.5-R0.3
TSC-CR-EM2S1.5-R0.5
TSC-CR-EM2S2-R0.1
TSC-CR-EM2S2-R0.2
TSC-CR-EM2S2-R0.3
TSC-CR-EM2S2-R0.4
TSC-CR-EM2S2-R0.5
TSC-CR-EM2S2.5-R0.1
TSC-CR-EM2S2.5-R0.2
TSC-CR-EM2S2.5-R0.3
TSC-CR-EM2S2.5-R0.5
TSC-CR-EM2S2.5-R[0.1-0.5/0.1]
TSC-CR-EM2S2.8-R[0.1,​0.2,​0.3,​0.4,​0.5]
TSC-CR-EM2S3-R0.1
TSC-CR-EM2S3-R0.2
TSC-CR-EM2S3-R0.3
TSC-CR-EM2S3-R0.4
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
R Size
(mm)
Flute Length (ℓ)
(mm)
Overall Length (L)
(mm)
Shank Diameter (d)
(mm)
Length Under Neck (ℓ1)
(mm)
R Precision
(μm)
Additional Classification Figure
1 Piece(s) 10 Day(s) or more 60.21245617 ~ 27±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 60.31245617 ~ 27±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 60.51245617 ~ 27±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 611245617 ~ 27±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 61.51245617 ~ 27±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 621245617 ~ 27±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 80.21655821 ~ 31±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 80.31655821 ~ 31±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 80.51655821 ~ 31±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 811655821 ~ 31±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 100.520651025 ~ 35±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 10120651025 ~ 35±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 101.520651025 ~ 35±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 10220651025 ~ 35±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 10320651025 ~ 35±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 120.524751229 ~ 45±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 12124751229 ~ 45±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 121.524751229 ~ 45±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 12224751229 ~ 45±0.01Standard Neck Relief2
1 Piece(s) 10 Day(s) or more 60.25 ~ 1245617 ~ 27±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 60.35 ~ 1245617 ~ 27±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 60.55 ~ 1245617 ~ 27±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 615 ~ 1245617 ~ 27±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 61.55 ~ 1245617 ~ 27±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 625 ~ 1245617 ~ 27±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 80.25 ~ 1655821 ~ 31±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 80.35 ~ 1655821 ~ 31±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 80.55 ~ 1655821 ~ 31±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 815 ~ 1655821 ~ 31±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 100.55 ~ 20651025 ~ 35±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1015 ~ 20651025 ~ 35±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 101.55 ~ 20651025 ~ 35±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1025 ~ 20651025 ~ 35±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1035 ~ 20651025 ~ 35±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 120.55 ~ 24751229 ~ 45±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1215 ~ 24751229 ~ 45±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 121.55 ~ 24751229 ~ 45±0.01Cutting Edge R Processing2
1 Piece(s) 10 Day(s) or more 1225 ~ 24751229 ~ 45±0.01Cutting Edge R Processing2
1 Piece(s)Available 8 Day(s) or more 10.12404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 10.22404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 10.32404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 1.50.13404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 1.50.23404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 1.50.33404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 1.50.53404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 20.14404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 20.24404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 20.34404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 20.44404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 20.54404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 2.50.15404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 2.50.25404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 2.50.35404-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 2.50.55404-±0.01Stocked Product1
1 Piece(s) 16 Day(s) or more 2.50.1 ~ 0.55404-±0.02Manufactured Product1
1 Piece(s) 16 Day(s) or more 2.80.1 ~ 0.55.6404-±0.02Manufactured Product1
1 Piece(s)Available 8 Day(s) or more 30.16456-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 30.26456-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 30.36456-±0.01Stocked Product1
1 Piece(s)Available 8 Day(s) or more 30.46456-±0.01Stocked Product1

Loading...

Specifications

TSC series carbide radius end mill, 2-flute / short model:Related Image

Model Number
TSC-CR-EM2S

Outer Diameter
D
Radius R Flute Length
Overall Length
L
Shank Diameter
d
Figure ● Stocked Product
□ Manufactured Product
1 0.1 0.2 0.3             2 40 4 1
1.5 0.1 0.2 0.3   0.5         3 40 4 1
2 0.1 0.2 0.3 0.4 0.5         4 40 4 1
2.5 0.1 0.2 0.3   0.5         5 40 4 1
      0.4          
2.8 0.1 - 0.5 5.6 40 4 1
3 0.1 0.2 0.3 0.4 0.5 1       6 45 6 1
0.6 - 0.7
3.5 0.1 - 0.7 7 45 6 1
4   0.2 0.3 0.4 0.5 1       8 45 6 1
0.1 - 0.9
4.5 0.1 - 1.2 9 45 6 1
5 0.1 0.2 0.3   0.5 1       10 45 6 1
0.4 - 1.5
5.5 0.1 ~ 1.7 11 45 6 1
6   0.2 0.3   0.5 1 1.5 2   12 45 6 2
0.1 ~ 2.0
8   0.2 0.3   0.5 1       16 55 8 2
0.1 ~ 3.0
10         0.5 1 1.5 2 3 20 65 10 2
0.1 ~ 3.0
12         0.5 1 1.5 2   24 75 12 2
0.1 ~ 3.0
16 0.1 ~ 3.0 32 105 16 2
20 0.1 ~ 3.0 40 110 20 2

[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.

For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
A general purpose 2-flute end mill product with added high-accuracy curvature.
The radial blade tip is also useful to prevent chipping.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 2 Model Radius
Processing Applications Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Standard Helix (30 to 40°)

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)