(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide roughing end mill, fine pitch / short model (TSC-RFPS5)

TSC series carbide roughing end mill, fine pitch / short model TSC-RFPS5

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

PDF

TSC series carbide roughing end mill, fine pitch / short model:Related Image

Part Number
TSC-RFPS5
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Additional Classification Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
1 Piece(s)Available 8 Day(s) or more 510657-Stocked Product0 ~ -0.0481

Loading...

  1. 1

Specifications

TSC series carbide roughing end mill, fine pitch / short model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Number of Flutes Figure
Outer Diameter
D
TSC-RFPS 5 10 57 6 4 1
6 12 57 6 4 2
7 14 66 8 4 1
8 16 69 8 4 2
9 18 69 10 4 1
10 20 72 10 4 2
12 24 83 12 4 2
13 26 83 14 4 1
14 26 83 14 4 2
16 32 92 16 4 2
18 32 92 18 4 2
20 38 104 20 4 2



For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 4 Model Roughing
Coating For High Hardness (Silicone-Based) Processing Applications Flat Surface / Side Surface / Inclined Cutting Geometry Ultra-Small R
Torsion Angle (θ) Weak Helix (15 to 25°)

Please check the type/dimensions/specifications of the part TSC-RFPS5 in the TSC series carbide roughing end mill, fine pitch / short model series.

Products like this...

Part Number
TSC-RFPS14
TSC-RFPS16
TSC-RFPS18
TSC-RFPS6
TSC-RFPS7
TSC-RFPS8
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Additional Classification Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
1 Piece(s)Available 8 Day(s) or more 14261483-Stocked Product0 ~ -0.072
1 Piece(s)Available 8 Day(s) or more 16321692-Stocked Product0 ~ -0.072
1 Piece(s)Available 8 Day(s) or more 18321892-Stocked Product0 ~ -0.0842
1 Piece(s)Available 8 Day(s) or more 612657-Stocked Product0 ~ -0.0582
1 Piece(s)Available 8 Day(s) or more 714866-Stocked Product0 ~ -0.0581
1 Piece(s)Available 8 Day(s) or more 816869-Stocked Product0 ~ -0.0582

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)