(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC series carbide tapered end mill, 2-flute / regular model

TSC series carbide tapered end mill, 2-flute / regular model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

[Features]
·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

PDF

TSC series carbide tapered end mill, 2-flute / regular model:Related Image

Part Number
TSC-TEM2R0.5-1
TSC-TEM2R0.5-2
TSC-TEM2R0.5-3
TSC-TEM2R0.5-5
TSC-TEM2R0.5-10
TSC-TEM2R0.5-15
TSC-TEM2R1-1
TSC-TEM2R1-2
TSC-TEM2R1-3
TSC-TEM2R1-5
TSC-TEM2R1-6
TSC-TEM2R1-7
TSC-TEM2R1-10
TSC-TEM2R1-12
TSC-TEM2R1-15
TSC-TEM2R1-20
TSC-TEM2R1-30
TSC-TEM2R1.5-1
TSC-TEM2R1.5-2
TSC-TEM2R1.5-3
TSC-TEM2R1.5-5
TSC-TEM2R1.5-6
TSC-TEM2R1.5-7
TSC-TEM2R1.5-10
TSC-TEM2R1.5-12
TSC-TEM2R1.5-15
TSC-TEM2R1.5-20
TSC-TEM2R1.5-30
TSC-TEM2R2-0.5
TSC-TEM2R2-1
TSC-TEM2R2-2
TSC-TEM2R2-3
TSC-TEM2R2-5
TSC-TEM2R2-6
TSC-TEM2R2-7
TSC-TEM2R2-10
TSC-TEM2R2-12
TSC-TEM2R2-15
TSC-TEM2R2-20
TSC-TEM2R2-30
TSC-TEM2R3-0.5
TSC-TEM2R3-1
TSC-TEM2R3-2
TSC-TEM2R3-3
TSC-TEM2R3-5
TSC-TEM2R3-6
TSC-TEM2R3-7
TSC-TEM2R3-10
TSC-TEM2R3-12
TSC-TEM2R4-0.5
TSC-TEM2R4-1
TSC-TEM2R4-2
TSC-TEM2R4-3
TSC-TEM2R4-5
TSC-TEM2R4-6
TSC-TEM2R4-7
TSC-TEM2R4-10
TSC-TEM2R4-15
TSC-TEM2R4-20
TSC-TEM2R4-30
Part NumberMinimum order quantityVolume DiscountDays to ShipSingle Angle (θ)
(Degree)
Outer Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Large Tip Diameter D1
(mm)
1 Piece(s)Available 8 Day(s) or more 10.524500.57
1 Piece(s)Available 8 Day(s) or more 20.524500.64
1 Piece(s)Available 8 Day(s) or more 30.524500.71
1 Piece(s)Available 8 Day(s) or more 50.524500.85
1 Piece(s)Available 8 Day(s) or more 100.524501.21
1 Piece(s)Available 8 Day(s) or more 150.524501.57
1 Piece(s)Available 8 Day(s) or more 1144501.14
1 Piece(s)Available 8 Day(s) or more 2144501.28
1 Piece(s)Available 8 Day(s) or more 3144501.42
1 Piece(s)Available 8 Day(s) or more 5144501.7
1 Piece(s)Available 8 Day(s) or more 6144501.84
1 Piece(s)Available 8 Day(s) or more 7144501.98
1 Piece(s)Available 8 Day(s) or more 10144502.41
1 Piece(s)Available 8 Day(s) or more 12144502.70
1 Piece(s)Available 8 Day(s) or more 15134502.60
1 Piece(s)Available 8 Day(s) or more 20134503.18
1 Piece(s)Available 8 Day(s) or more 3012.64504.00
1 Piece(s)Available 8 Day(s) or more 11.564501.71
1 Piece(s)Available 8 Day(s) or more 21.564501.92
1 Piece(s)Available 8 Day(s) or more 31.564502.13
1 Piece(s)Available 8 Day(s) or more 51.564502.55
1 Piece(s)Available 8 Day(s) or more 61.564502.76
1 Piece(s)Available 8 Day(s) or more 71.564502.97
1 Piece(s)Available 8 Day(s) or more 101.564503.62
1 Piece(s)Available 8 Day(s) or more 121.564504.05
1 Piece(s)Available 8 Day(s) or more 151.554504.18
1 Piece(s)Available 8 Day(s) or more 201.556505.14
1 Piece(s)Available 8 Day(s) or more 301.53.96506.00
1 Piece(s)Available 8 Day(s) or more 0.5284502.14
1 Piece(s)Available 8 Day(s) or more 1284502.28
1 Piece(s)Available 8 Day(s) or more 2284502.56
1 Piece(s)Available 8 Day(s) or more 3284502.84
1 Piece(s)Available 8 Day(s) or more 5284503.40
1 Piece(s)Available 8 Day(s) or more 6284503.68
1 Piece(s)Available 8 Day(s) or more 7284503.96
1 Piece(s)Available 8 Day(s) or more 10286504.82
1 Piece(s)Available 8 Day(s) or more 12286505.40
1 Piece(s)Available 8 Day(s) or more 15276505.75
1 Piece(s)Available 8 Day(s) or more 2025.56506.00
1 Piece(s)Available 8 Day(s) or more 30246506.62
1 Piece(s)Available 8 Day(s) or more 0.53124603.21
1 Piece(s)Available 8 Day(s) or more 13124603.42
1 Piece(s)Available 8 Day(s) or more 23124603.84
1 Piece(s)Available 8 Day(s) or more 33124604.26
1 Piece(s)Available 8 Day(s) or more 53126605.10
1 Piece(s)Available 8 Day(s) or more 63126605.52
1 Piece(s)Available 8 Day(s) or more 73126605.95
1 Piece(s) 8 Day(s) or more 103128607.23
1 Piece(s)Available 8 Day(s) or more 123118607.68
1 Piece(s)Available 8 Day(s) or more 0.54164604.28
1 Piece(s)Available 8 Day(s) or more 14166604.56
1 Piece(s)Available 8 Day(s) or more 24166605.12
1 Piece(s)Available 8 Day(s) or more 34166605.68
1 Piece(s)Available 8 Day(s) or more 54166606.80
1 Piece(s)Available 8 Day(s) or more 64168607.36
1 Piece(s)Available 8 Day(s) or more 74168607.93
1 Piece(s)Available 8 Day(s) or more 1041610609.64
1 Piece(s)Available 8 Day(s) or more 15414126011.50
1 Piece(s)Available 8 Day(s) or more 20410126011.28
1 Piece(s)Available 8 Day(s) or more 3046126010.93

Loading...

Specifications

TSC series carbide tapered end mill, 2-flute / regular model:Related Image

Model Number     Flute Length
Large Tip Diameter
D1
Overall Length
L
Shank Diameter
d
Outer Diameter
D
Single Angle
θ
TSC-TEM2R 0.5 2 0.57 50 4
2 0.64 50 4
2 0.71 50 4
2 0.85 50 4
10° 2 1.21 50 4
15° 2 1.57 50 4
1 4 1.14 50 4
4 1.28 50 4
4 1.42 50 4
4 1.70 50 4
4 1.84 50 4
4 1.98 50 4
10° 4 2.41 50 4
12° 4 2.70 50 4
15° 3 2.60 50 4
20° 3 3.18 50 4
30° 2.6 4.00 50 4
1.5 6 1.71 50 4
6 1.92 50 4
6 2.13 50 4
6 2.55 50 4
6 2.76 50 4
6 2.97 50 4
10° 6 3.62 50 4
12° 6 4.05 50 4
15° 5 4.18 50 4
20° 5 5.14 50 6
30° 3.9 6.00 50 6
2 0.5° 8 2.14 50 4
8 2.28 50 4
8 2.56 50 4
8 2.84 50 4
8 3.40 50 4
8 3.68 50 4
8 3.96 50 4
10° 8 4.82 50 6
12° 8 5.40 50 6
15° 7 5.75 50 6
20° 5.5 6.00 50 6
30° 4 6.62 50 6

 

Model Number     Flute Length
Large Tip Diameter
D1
Overall Length
L
Shank Diameter
d
Outer Diameter
D
Single Angle
θ
TSC-TEM2R 3 0.5° 12 3.21 60 4
12 3.42 60 4
12 3.84 60 4
12 4.26 60 4
12 5.10 60 6
12 5.52 60 6
12 5.95 60 6
10° 12 7.23 60 8
12° 11 7.68 60 8
15° 11 8.89 60 10
20° 9 9.55 60 10
30° 5 8.77 60 10
4 0.5° 16 4.28 60 4
16 4.56 60 6
16 5.12 60 6
16 5.68 60 6
16 6.80 60 6
16 7.36 60 8
16 7.93 60 8
10° 16 9.64 60 10
15° 14 11.50 60 12
20° 10 11.28 60 12
30° 6 10.93 60 12
5 0.5° 20 5.35 60 6
20 5.70 60 6
20 6.40 60 6
20 7.10 60 8
20 8.50 60 8
6 0.5° 24 6.42 70 6
24 6.84 70 8
24 7.68 70 8
24 8.52 70 8
24 10.20 70 10


For Cutting Conditions, Refer to >>Click here.

More Information


It has a TS film-coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
The blade tip has a sharp edge allowing corner edges to also be machined.

Basic Information

Model Tapered Square Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper Number of Flutes(sheet) 2
Coating For High Hardness (Silicone-Based) Torsion Angle Standard Helix (30 to 40°)

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)