(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

PDF

TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model:Related Image

Part Number
TSC-SHP-CR-HFEM4B2-R0.2
TSC-SHP-CR-HFEM4B3-R0.2
TSC-SHP-CR-HFEM4B4-R0.5
TSC-SHP-CR-HFEM4B6-R0.5
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
R Size
(mm)
Flute Length (ℓ)
(mm)
Figure
1 Piece(s)Available 8 Day(s) or more 20.231
1 Piece(s)Available 8 Day(s) or more 30.24.51
1 Piece(s)Available 8 Day(s) or more 40.561
1 Piece(s)Available 8 Day(s) or more 60.592

Loading...

  1. 1

Specifications

TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model:Related Image

Model Number     Flute Length
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
Radius
R
TSC-SHP-CR-HFEM4B 2 0.2 3 50 6 1
3 0.2 4.5 50 6 1
4 0.5 6 50 6 1
6 0.5 9 50 6 2


For Cutting Conditions, Refer to >>Click here.

More Information


It is designed to have an ideal flute length, shank length and overall length, keeping in mind the usage of a shrink fit holder for processing.
A radius (R) accuracy within 5 μm (our measured ratio) / shank diameter, tolerance h5 standard, has been adopted. The highly accurate tools with minimal quality variation are suitable for realizing high-accuracy, high-precision machining.
Designed to have a blade shape with an emphasis on rigidity thanks to the radius (R) model negative blade, they are suitable for machining heat-treated steel / high hardness steel.
The TS coat consisting of a nitride-based composite film with a fully crystalline structure means that it realizes a high oxidation resistance temperature and high hardness. It is ideal for high speed machining and dry machining of heat-treated / high hardness steel.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron Number of Flutes(sheet) 4 Model High-Feed Radius
Overall Length (L)(mm) 50 Shank Diameter (d)(mm) 6 Processing Applications Flat Surface / Side Surface / Curved Surface / Inclined Cutting
Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Powerful Helix (45° to 60°) R Precision(μm) ±0.005
Additional Classification Stocked Product

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)