(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

2 types that are recommended in the standing-wall machining of aluminum

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • B (Stub)

PDF

Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model:Related Image

Part Number
SEC-LS-ALHEM3B5
SEC-LS-ALHEM3B6
SEC-LS-ALHEM3B8
SEC-LS-ALHEM3B10
SEC-LS-ALHEM3B12
SEC-LS-ALHEM3B14
SEC-LS-ALHEM3B18
SEC-LS-ALHEM3B22
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
1 Piece(s)Available 8 Day(s) or more 59480
1 Piece(s)Available 8 Day(s) or more 69480
1 Piece(s)Available 8 Day(s) or more 8126100
1 Piece(s)Available 8 Day(s) or more 10158130
1 Piece(s)Available 8 Day(s) or more 121810150
1 Piece(s)Available 8 Day(s) or more 142112160
1 Piece(s)Available 8 Day(s) or more 182716180
1 Piece(s)Available 8 Day(s) or more 223320200

Loading...

  1. 1

Specifications

Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
SEC-LS-ALHEM3B 5 9 80 4 1
6 9 80 4 1
8 12 100 6 1
10 15 130 8 1
12 18 150 10 1
14 21 160 12 1
18 27 180 16 1
22 33 200 20 1



For Cutting Conditions, Refer to >>Click here.

More Information


Adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
The shank relief also makes it suitable in cases where tool interference may be an issue.
The corners of the blade tip are slightly rounded to prevent chipping when cutting.
The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces. (SEC-LS-ALHEM3B Characteristics)
The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. (SEC-SS-ALHEM3B Characteristics)
It adopts a 3-flute shape to be strong against chatter and is capable of high-speed, high-efficiency machining of grooves. (SEC-SS-ALHEM3B Characteristics)

Basic Information

Work Material Aluminum Alloy / Copper Alloy / Graphite / Resin Number of Flutes(sheet) 3 Model Square
Coating Non-Coated Processing Applications Flat Surface / Side Surface / Groove / Inclined Cutting Geometry Ultra-Small R
Torsion Angle (θ) Powerful Helix (45° to 60°) Additional Classification Stocked Product Tolerance of OD(mm) 0 ~ -0.02
● Inventory Product □ Manufacturer Product

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)