(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
  • Fitur "Auto Translate" pada halaman eKatalog sementara ini tidak tersedia. Mohon maaf atas ketidaknyamanannya.
    Auto translation feature on our e-Catalog page is temporarily not available. We apologize for any inconvenience.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 11:00 29/11/2020 sampai dengan 6:00 pada tanggal 30/11/2020. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 11:00 29/11/2020 to 6:00 (WIB) 30/11/2020. We apologize for the inconvenience.

DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Popular DLC coated type of aluminum roughing

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

PDF

DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Part Number
DLC-ALRFR5
DLC-ALRFR6
DLC-ALRFR8
DLC-ALRFR10
DLC-ALRFR12
DLC-ALRFR16
DLC-ALRFR20
SN-DLC-ALRFR6-[20-39/1]-15
SN-DLC-ALRFR8-[25-48/1]-20
SN-DLC-ALRFR10-[30-42/1]-25
SN-DLC-ALRFR12-[35-70/1]-30
SN-DLC-ALRFR16-[45-68/1]-40
SN-DLC-ALRFR20-[50-62/1]-45
Part NumberVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Additional Classification Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
Available 9 Day(s) or more 515657-Stocked Product0 ~ -0.0481
Available 9 Day(s) or more 615657-Stocked Product0 ~ -0.0582
Available 9 Day(s) or more 820872-Stocked Product0 ~ -0.0582
Available 9 Day(s) or more 10251072-Stocked Product0 ~ -0.0702
Available 9 Day(s) or more 123012100-Stocked Product0 ~ -0.0702
Available 9 Day(s) or more 164016100-Stocked Product0 ~ -0.0702
Available 9 Day(s) or more 204520100-Stocked Product0 ~ -0.0842
11 Day(s) or more 61565720 ~ 39Standard Neck Relief0 ~ -0.0582
11 Day(s) or more 82087225 ~ 48Standard Neck Relief0 ~ -0.0582
11 Day(s) or more 1025107230 ~ 42Standard Neck Relief0 ~ -0.0702
11 Day(s) or more 12301210035 ~ 70Standard Neck Relief0 ~ -0.0702
11 Day(s) or more 16401610045 ~ 68Standard Neck Relief0 ~ -0.0702
11 Day(s) or more 20452010050 ~ 62Standard Neck Relief0 ~ -0.0842

Loading...

  1. 1

Specifications

DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
DLC-ALRFR 5 15 57 6 1
6 15 57 6 2
8 20 72 8 2
10 25 72 10 2
12 30 100 12 2
16 40 100 16 2
20 45 100 20 2


For Cutting Conditions, Refer to >>Click here.

More Information


The DLC coating has excellent wear resistance and deposition resistant properties that make it ideal for machining aluminum.
The wide pitch and shallow nicks allow the time taken for the rough machining of aluminum to be reduced.
It has a 3-flute structure for wider chip pockets which discharges chips better, allowing for high-efficiency aluminum machining.

Basic Information

Work Material Aluminum Alloy / Copper Alloy / Resin Number of Flutes(sheet) 3 Model Roughing
Coating DLC Processing Applications Flat Surface / Side Surface / Groove / Inclined Cutting Geometry Ultra-Small R
Torsion Angle (θ) Standard Helix (30 to 40°)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)