(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Fitur "Auto Translate" pada halaman eKatalog sementara ini tidak tersedia. Mohon maaf atas ketidaknyamanannya.
    Auto translation feature on our e-Catalog page is temporarily not available. We apologize for any inconvenience.
  • Sehubungan dengan wabah virus Corona (2019-nCoV), kami mohon maaf dikarenakan beberapa supplier harus berhenti beroperasi dan tingginya permintaan akan beberapa produk, hal ini akan mempengaruhi lead time beberapa produk menjadi lebih lama dari waktu standar.
    Regarding the Coronavirus (2019-nCoV) Pandemic, Some of supplier have to stop working to follow additional precautionary measures the virus and due to effect of high demand some product, it may cause some of product take longer than standard lead time.

Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Significantly reduces the roughing time of aluminum

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image

Part Number
SEC-ALRFR5
SEC-ALRFR6
SEC-ALRFR8
SEC-ALRFR10
SEC-ALRFR12
SEC-ALRFR16
SEC-ALRFR20
SN-SEC-ALRFR6-[20-39/1]-15
SN-SEC-ALRFR8-[25-48/1]-20
SN-SEC-ALRFR10-[30-42/1]-25
SN-SEC-ALRFR12-[35-70/1]-30
SN-SEC-ALRFR16-[45-68/1]-40
SN-SEC-ALRFR20-[50-62/1]-45
Part NumberVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Additional Classification Tolerance of OD
(mm)
Figure ● Inventory Product □ Manufacturer Product
Available 9 Day(s) or more 515657-Stocked Product0 ~ -0.0481
Available 9 Day(s) or more 615657-Stocked Product0 ~ -0.0582
Available 9 Day(s) or more 820872-Stocked Product0 ~ -0.0582
Available 9 Day(s) or more 10251072-Stocked Product0 ~ -0.0702
Available 9 Day(s) or more 123012100-Stocked Product0 ~ -0.0702
Available 9 Day(s) or more 164016100-Stocked Product0 ~ -0.0702
Available 9 Day(s) or more 204520100-Stocked Product0 ~ -0.0842
11 Day(s) or more 61565720 ~ 39Standard Neck Relief0 ~ -0.0582
11 Day(s) or more 82087225 ~ 48Standard Neck Relief0 ~ -0.0582
11 Day(s) or more 1025107230 ~ 42Standard Neck Relief0 ~ -0.0702
11 Day(s) or more 12301210035 ~ 70Standard Neck Relief0 ~ -0.0702
11 Day(s) or more 16401610045 ~ 68Standard Neck Relief0 ~ -0.0702
11 Day(s) or more 20452010050 ~ 62Standard Neck Relief0 ~ -0.0842

Loading...

  1. 1

Specifications

Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model:Related Image 

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
SEC-ALRFR 5 15 57 6 1
6 15 57 6 2
8 20 72 8 2
10 25 72 10 2
12 30 100 12 2
16 40 100 16 2
20 45 100 20 2


For Cutting Conditions, Refer to >>Click here.

More Information


The wide pitch and shallow nicks allow the time taken for the rough machining of aluminum to be reduced.
It has a 3-flute structure for wider chip pockets which discharges chips better, allowing for high-efficiency aluminum machining.

Basic Information

Work Material Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 3 Model Roughing
Coating Non-Coated Processing Applications Flat Surface / Side Surface / Groove / Inclined Cutting Geometry Ultra-Small R
Torsion Angle (θ) Standard Helix (30 to 40°)

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)