(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Straight Edge Square End Mill, 2-flute / Back Tapered Type

Carbide Straight Edge Square End Mill, 2-flute / Back Tapered Type

Click this image to zoom it.

Move the mouse over the image to zoom

Carbide Straight Blade Square End Mill, 2-Flute, Back Tapered Type:Related Image
Part Number
BSRM4-[3.01-4/0.01]-[2-15/0.5]-[F,​T]
BSRM6-[3.01-6/0.01]-[3-24/0.5]-[F,​T]
BSRM8-[4.01-8/0.01]-[4-28/0.5]-[F,​T]
BSRM10-[6.01-10/0.01]-[5-35/0.5]-[F,​T]
BSRM12-[8.01-12/0.01]-[6-36/0.5]-[F,​T]
BSRM16-[10.01-16/0.01]-[8-48/0.5]-[F,​T]
LS-BSRM4-[3.01-4/0.01]-[2-15/0.5]-[F,​T]
LS-BSRM6-[3.01-6/0.01]-[3-24/0.5]-[F,​T]
LS-BSRM8-[4.01-8/0.01]-[4-28/0.5]-[F,​T]
LS-BSRM10-[6.01-10/0.01]-[5-35/0.5]-[F,​T]
LS-BSRM12-[8.01-12/0.01]-[6-36/0.5]-[F,​T]
LS-SRM4-[3.01-4/0.01]-[2-15/0.5]-[F,​T]
LS-SRM6-[3.01-6/0.01]-[3-24/0.5]-[F,​T]
LS-SRM8-[4.01-8/0.01]-[4-28/0.5]-[F,​T]
LS-SRM10-[6.01-10/0.01]-[5-35/0.5]-[F,​T]
LS-SRM12-[8.01-12/0.01]-[6-36/0.5]-[F,​T]
SRM4-[3.01-4/0.01]-[2-15/0.5]-[F,​T]
SRM6-[3.01-6/0.01]-[3-24/0.5]-[F,​T]
SRM8-[4.01-8/0.01]-[4-28/0.5]-[F,​T]
SRM10-[6.01-10/0.01]-[5-35/0.5]-[F,​T]
SRM12-[8.01-12/0.01]-[6-36/0.5]-[F,​T]
SRM16-[10.01-16/0.01]-[8-48/0.5]-[F,​T]
Part NumberMinimum order quantityVolume DiscountDays to ShipShank Diameter d
(mm)
Overall Length L
(mm)
Processing Applications Bottom Blade Shape Flute Diameter (D)
(mm)
Flute Length (ℓ)
(mm)
Use
1 Piece(s) 10 Day(s) or more 450Boss Hole DrillingF (Flat) / T (Center Dented)3.01 ~ 42 ~ 15For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 660Boss Hole DrillingF (Flat) / T (Center Dented)3.01 ~ 63 ~ 24For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 860Boss Hole DrillingF (Flat) / T (Center Dented)4.01 ~ 84 ~ 28For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1080Boss Hole DrillingF (Flat) / T (Center Dented)6.01 ~ 105 ~ 35For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1280Boss Hole DrillingF (Flat) / T (Center Dented)8.01 ~ 126 ~ 36For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 16100Boss Hole DrillingF (Flat) / T (Center Dented)10.01 ~ 168 ~ 48For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 480Boss Hole DrillingF (Flat) / T (Center Dented)3.01 ~ 42 ~ 15For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 690Boss Hole DrillingF (Flat) / T (Center Dented)3.01 ~ 63 ~ 24For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 890Boss Hole DrillingF (Flat) / T (Center Dented)4.01 ~ 84 ~ 28For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 10120Boss Hole DrillingF (Flat) / T (Center Dented)6.01 ~ 105 ~ 35For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 12120Boss Hole DrillingF (Flat) / T (Center Dented)8.01 ~ 126 ~ 36For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 480Flank / Groove ProcessingF (Flat) / T (Center Dented)3.01 ~ 42 ~ 15For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 690Flank / Groove ProcessingF (Flat) / T (Center Dented)3.01 ~ 63 ~ 24For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 890Flank / Groove ProcessingF (Flat) / T (Center Dented)4.01 ~ 84 ~ 28For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 10120Flank / Groove ProcessingF (Flat) / T (Center Dented)6.01 ~ 105 ~ 35For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 12120Flank / Groove ProcessingF (Flat) / T (Center Dented)8.01 ~ 126 ~ 36For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 450Flank / Groove ProcessingF (Flat) / T (Center Dented)3.01 ~ 42 ~ 15For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 660Flank / Groove ProcessingF (Flat) / T (Center Dented)3.01 ~ 63 ~ 24For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 860Flank / Groove ProcessingF (Flat) / T (Center Dented)4.01 ~ 84 ~ 28For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1080Flank / Groove ProcessingF (Flat) / T (Center Dented)6.01 ~ 105 ~ 35For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1280Flank / Groove ProcessingF (Flat) / T (Center Dented)8.01 ~ 126 ~ 36For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 16100Flank / Groove ProcessingF (Flat) / T (Center Dented)10.01 ~ 168 ~ 48For Radial Groove Milling

Loading...

  1. 1

Specifications

Carbide Straight Blade Square End Mill, 2-Flute, Back Tapered Type:Related Image

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number Blade Diameter D
0.01 mm Increment Designation
Flute Length
0.5 mm Increment Designation
Bottom Blade Shape
(Selection)
Overall Length L
Shank Diameter d
BSRM/SRMLS-BSRM / LS-SRM
BSRM
LS-BSRM

(Long Shank)
SRM
LS-SRM

(Long Shank)
43.01 ~4.002.0 ~ 15.0T
(Dished)
F
(Flat)
Bottom Blade Shape >>P.608
5080
63.01 ~6.003.0 ~ 24.06090
84.01 ~8.004.0 ~ 28.06090
106.01 ~ 10.005.0 ~ 35.080120
128.01 ~ 12.006.0 ~ 36.080120
1610.01 ~ 16.008.0 ~ 48.0100-

Alterations

Carbide Straight Blade Square End Mill, 2-Flute, Back Tapered Type:Related Image

Basic Information

Material Ultrafine Particulate Carbide

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)