(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Straight Blade Radius End Mill, 2-Flute, Back Tapered Model

Carbide Straight Blade Radius End Mill, 2-Flute, Back Tapered Model

Click this image to zoom it.

Move the mouse over the image to zoom

[Features]
·Corner radius shape back taper type that achieves efficient machining

PDF

Part Number

Configured Part Number is shown.

Carbide Straight Blade Radius End Mill, 2-Flute, Back Tapered Model:Related Image
Part Number
LS-SRRM4-[3.01-4/0.01]-[0.1-1.9/0.01]-[2-15/0.5]-[F,​T]
LS-SRRM6-[3.01-6/0.01]-[0.1-2.9/0.01]-[3-24/0.5]-[F,​T]
LS-SRRM8-[4.01-8/0.01]-[0.1-3.9/0.01]-[4-28/0.5]-[F,​T]
LS-SRRM10-[6.01-10/0.01]-[0.1-4.9/0.01]-[5-35/0.5]-[F,​T]
LS-SRRM12-[8.01-12/0.01]-[0.1-5.9/0.01]-[6-36/0.5]-[F,​T]
SRRM4-[3.01-4/0.01]-[0.1-1.9/0.01]-[2-15/0.5]-[F,​T]
SRRM6-[3.01-6/0.01]-[0.1-2.9/0.01]-[3-24/0.5]-[F,​T]
SRRM8-[4.01-8/0.01]-[0.1-3.9/0.01]-[4-28/0.5]-[F,​T]
SRRM10-[6.01-10/0.01]-[0.1-4.9/0.01]-[5-35/0.5]-[F,​T]
SRRM12-[8.01-12/0.01]-[0.1-5.9/0.01]-[6-36/0.5]-[F,​T]
SRRM16-[10.01-16/0.01]-[0.1-7.9/0.01]-[8-48/0.5]-[F,​T]
Part NumberMinimum order quantityVolume DiscountDays to ShipShank Diameter d
(mm)
Overall Length L
(mm)
Bottom Blade Shape Flute Diameter (D)
(mm)
Flute Length (ℓ)
(mm)
Radius (R)
(mm)
1 Piece(s) 10 Day(s) or more 480F (Flat) / T (Center Dented)3.01 ~ 42 ~ 150.1 ~ 1.9
1 Piece(s) 10 Day(s) or more 690F (Flat) / T (Center Dented)3.01 ~ 63 ~ 240.1 ~ 2.9
1 Piece(s) 10 Day(s) or more 890F (Flat) / T (Center Dented)4.01 ~ 84 ~ 280.1 ~ 3.9
1 Piece(s) 10 Day(s) or more 10120F (Flat) / T (Center Dented)6.01 ~ 105 ~ 350.1 ~ 4.9
1 Piece(s) 10 Day(s) or more 12120F (Flat) / T (Center Dented)8.01 ~ 126 ~ 360.1 ~ 5.9
1 Piece(s) 10 Day(s) or more 450F (Flat) / T (Center Dented)3.01 ~ 42 ~ 150.1 ~ 1.9
1 Piece(s) 10 Day(s) or more 660F (Flat) / T (Center Dented)3.01 ~ 63 ~ 240.1 ~ 2.9
1 Piece(s) 10 Day(s) or more 860F (Flat) / T (Center Dented)4.01 ~ 84 ~ 280.1 ~ 3.9
1 Piece(s) 10 Day(s) or more 1080F (Flat) / T (Center Dented)6.01 ~ 105 ~ 350.1 ~ 4.9
1 Piece(s) 10 Day(s) or more 1280F (Flat) / T (Center Dented)8.01 ~ 126 ~ 360.1 ~ 5.9
1 Piece(s) 10 Day(s) or more 16100F (Flat) / T (Center Dented)10.01 ~ 168 ~ 480.1 ~ 7.9

Loading...

  1. 1

Specifications

Carbide Straight Blade Radius End Mill, 2-Flute, Back Tapered Model:Related Image

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number   Flute Diameter
D
0.01 mm Increment Designation
Radius
R
0.01 mm Increment Designation
Flute Length

0.5 mm Increment Designation
Bottom Blade Shape
(Selection)
Overall Length
L
Shank Diameter
d
SRRM LS-SRRM
SRRM

LS-SRRM
(Long Shank)
4 3.01 ~4.00 0.10 ≤ R ≤ (D - 0.2) / 2 2.0 ~ 15.0 T
(Dished)
F
(Flat)
Bottom Blade Shape >>P.608
50 80
6 3.01 ~6.00 3.0 ~ 24.0 60 90
8 4.01 ~8.00 4.0 ~ 28.0 60 90
10 6.01 ~ 10.00 5.0 ~ 35.0 80 120
12 8.01 ~ 12.00 6.0 ~ 36.0 80 120
16 10.01 ~ 16.00 8.0 ~ 48.0 100 -



For Cutting Conditions, Refer to >>Click here.

Basic Information

Material Ultrafine Particulate Carbide

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)