(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Straight Edge Corner Angle End Mill, 2-flute / Angle R Type

Carbide Straight Edge Corner Angle End Mill, 2-flute / Angle R Type

Click this image to zoom it.

Move the mouse over the image to zoom

Enables simultaneous machining of corner radius
[Note: Tip diameter D1 is the dimension on a virtual point]

Carbide Straight Blade Corner Angle End Mill, 2-Flute, Rounded Corner Type:Related Image
Part Number
BSCACR3-[0.5-3/0.005]-[5-85/1]-[0-59/1]-[0.3-2.8/0.01]-[0.5-15/0.5]-[0.1-0.5/0.1]-[0-0.5/0.1]-[F,​T]
BSCACR4-[2.005-4/0.005]-[5-85/1]-[0-59/1]-[0.3-3.8/0.01]-[0.5-20/0.5]-[0.1-0.5/0.1]-[0-0.5/0.1]-[F,​T]
BSCACR6-[3.005-6/0.005]-[5-85/1]-[0-59/1]-[0.3-5.8/0.01]-[3-24/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
BSCACR8-[4.005-8/0.005]-[5-85/1]-[0-59/1]-[0.3-7.8/0.01]-[4-28/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
BSCACR10-[6.005-10/0.005]-[5-85/1]-[0-59/1]-[0.3-9.8/0.01]-[5-35/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
BSCACR12-[8.005-12/0.005]-[5-85/1]-[0-59/1]-[0.3-11.8/0.01]-[6-36/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
BSCACR16-[10.005-16/0.005]-[5-85/1]-[0-59/1]-[0.3-15.8/0.01]-[8-48/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
SCAEMR3-[0.5-3/0.01]-[5-85/1]-[0-59/1]-[0.3-2.8/0.01]-[0.5-15/0.5]-[0.1-0.5/0.1]-[0-0.5/0.1]-[F,​T]
SCAEMR4-[2.01-4/0.01]-[5-85/1]-[0-59/1]-[0.3-3.8/0.01]-[0.5-20/0.5]-[0.1-0.5/0.1]-[0-0.5/0.1]-[F,​T]
SCAEMR6-[3.01-6/0.01]-[5-85/1]-[0-59/1]-[0.3-5.8/0.01]-[3-24/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
SCAEMR8-[4.01-8/0.01]-[5-85/1]-[0-59/1]-[0.3-7.8/0.01]-[4-28/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
SCAEMR10-[6.01-10/0.01]-[5-85/1]-[0-59/1]-[0.3-9.8/0.01]-[5-35/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
SCAEMR12-[8.01-12/0.01]-[5-85/1]-[0-59/1]-[0.3-11.8/0.01]-[6-36/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
SCAEMR16-[10.01-16/0.01]-[5-85/1]-[0-59/1]-[0.3-15.8/0.01]-[8-48/0.5]-[0.1-0.3/0.1]-[0-0.3/0.1]-[F,​T]
Part NumberMinimum order quantityVolume DiscountDays to ShipShank Diameter d
(mm)
Overall Length L
(mm)
Processing Applications Corner Angle (Single Angle)(θ)
(°)
Corner Angle (Single Angle)(θ)
(′)
Bottom Blade Shape Flute Diameter (D)
(mm)
Flute Length (ℓ)
(mm)
Radius (R1)
(mm)
Radius (R2)
(mm)
Tip Diameter (D1)
(mm)
Use
1 Piece(s) 10 Day(s) or more 340Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)0.5 ~ 30.5 ~ 150.1 ~ 0.50 ~ 0.50.3 ~ 2.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 450Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)2.005 ~ 40.5 ~ 200.1 ~ 0.50 ~ 0.50.3 ~ 3.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 660Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)3.005 ~ 63 ~ 240.1 ~ 0.30 ~ 0.30.3 ~ 5.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 860Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)4.005 ~ 84 ~ 280.1 ~ 0.30 ~ 0.30.3 ~ 7.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1080Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)6.005 ~ 105 ~ 350.1 ~ 0.30 ~ 0.30.3 ~ 9.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1280Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)8.005 ~ 126 ~ 360.1 ~ 0.30 ~ 0.30.3 ~ 11.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 16100Boss Hole Drilling5 ~ 850 ~ 59F (Flat) / T (Center Dented)10.005 ~ 168 ~ 480.1 ~ 0.30 ~ 0.30.3 ~ 15.8For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 340Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)0.5 ~ 30.5 ~ 150.1 ~ 0.50 ~ 0.50.3 ~ 2.8For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 450Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)2.01 ~ 40.5 ~ 200.1 ~ 0.50 ~ 0.50.3 ~ 3.8For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 660Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)3.01 ~ 63 ~ 240.1 ~ 0.30 ~ 0.30.3 ~ 5.8For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 860Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)4.01 ~ 84 ~ 280.1 ~ 0.30 ~ 0.30.3 ~ 7.8For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1080Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)6.01 ~ 105 ~ 350.1 ~ 0.30 ~ 0.30.3 ~ 9.8For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1280Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)8.01 ~ 126 ~ 360.1 ~ 0.30 ~ 0.30.3 ~ 11.8For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 16100Flank / Groove Processing5 ~ 850 ~ 59F (Flat) / T (Center Dented)10.01 ~ 168 ~ 480.1 ~ 0.30 ~ 0.30.3 ~ 15.8For Radial Groove Milling

Loading...

  1. 1

Specifications

Carbide Straight Blade Corner Angle End Mill, 2-Flute, Rounded Corner Type:Related Image

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number Flute Diameter
D

0.005 mm Increment Designation
Corner Angle (Single Angle)
θ
° - '
1' Increment Designation
Tip Diameter
D1
0.01 mm Increment Designation
Blade Length

0.5 mm Increment Designation
Radius *
R
1
0.1 mm Increment Designation
Radius
R
2
0.1 mm Increment Designation
Bottom Blade Shape
(Selection)
Overall Length
L
Shank Diameter
d
BSCACR
(For Boss Hole Drilling)
30.500 ~ 1.5005° 0' ~ 85° 0'0.30 ≤ D1 ≤ (D - 0.2)0.5 ~ 5.00.1 ~ 0.50 ~ 0.5
T
(Dished)

F
(Flat)

Bottom Blade Shape >>P.608
40
1.505 ~ 2.0000.5 ~ 10.040
2.005 ~ 3.0000.5 ~ 15.040
42.005 ~ 4.0000.5 ~ 20.050
63.005 ~ 6.0003.0 ~ 24.00.1 ~ 0.30 ~ 0.360
84.005 ~ 8.0004.0 ~ 28.060
106.005 ~ 10.0005.0 ~ 35.080
128.005 ~ 12.0006.0 ~ 36.080
1610.005 ~ 16.0008.0 ~ 48.0100

 

Model Number Flute Diameter
D

0.01 mm Increment Designation
Corner Angle (Single Angle)
θ
° - '
1' Increment Designation
Tip Diameter
D1
0.01 mm Increment Designation
Blade Length

0.5 mm Increment Designation
Radius *
R
1
0.1 mm Increment Designation
Radius
R
2
0.1 mm Increment Designation
Bottom Blade Shape
(Selection)
Overall Length
L
Shank Diameter
d
SCAEMR
(For Side / Grooving)
30.50 ~ 1.505° 0' ~ 85° 0'0.30 ≤ D1 ≤ (D - 0.2)0.5 ~ 5.00.1 ~ 0.50 ~ 0.5
T
(Dished)

F
(Flat)

Bottom Blade Shape>>P.608
40
1.51 ~ 2.000.5 ~ 10.040
2.01 ~ 3.000.5 ~ 15.040
42.01 ~ 4.000.5 ~ 20.050
63.01 ~ 6.003.0 ~ 24.00.1 ~ 0.30 ~ 0.360
84.01 ~ 8.004.0 ~ 28.060
106.01 ~ 10.005.0 ~ 35.080
128.01 ~ 12.006.0 ~ 36.080
1610.01 ~ 16.008.0 ~ 48.0100

* Specify R1 in the range of (D1 - 2 x R1 - 0.1) / 2 R1.

Alterations

Carbide Straight Blade Corner Angle End Mill, 2-Flute, Rounded Corner Type:Related Image

Basic Information

Material Ultrafine Particulate Carbide

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)