(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Straight Edge Taper Corner Angle End Mill, 2-flute / Tip Diameter Specification Type

Carbide Straight Edge Taper Corner Angle End Mill, 2-flute / Tip Diameter Specification Type

Click this image to zoom it.

Move the mouse over the image to zoom

Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image
Part Number
BSTCADC3-[1-2.5/0.001]-[5-80/1]-[0-59/1]-[0.2-2.3/0.001]-[0-30/1]-[0-59/1]-[0.5-10/0.5]-[F,​T]
BSTCADC3-[1-2.5/0.001]-[5-80/1]-[0-59/1]-[0.2-2.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
BSTCADC4-[1-3.5/0.001]-[5-80/1]-[0-59/1]-[0.2-3.3/0.001]-[0-30/1]-[0-59/1]-[0.5-14/0.5]-[F,​T]
BSTCADC4-[1-3.5/0.001]-[5-80/1]-[0-59/1]-[0.2-3.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
BSTCADC6-[1-5.5/0.001]-[5-80/1]-[0-59/1]-[0.2-5.3/0.001]-[0-30/1]-[0-59/1]-[0.5-22/0.5]-[F,​T]
BSTCADC6-[1-5.5/0.001]-[5-80/1]-[0-59/1]-[0.2-5.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
BSTCADC8-[1-7.5/0.001]-[5-80/1]-[0-59/1]-[0.2-7.3/0.001]-[0-30/1]-[0-59/1]-[0.5-28/0.5]-[F,​T]
BSTCADC8-[1-7.5/0.001]-[5-80/1]-[0-59/1]-[0.2-7.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
BSTCADC10-[1-9.5/0.001]-[5-80/1]-[0-59/1]-[0.2-9.3/0.001]-[0-30/1]-[0-59/1]-[0.5-35/0.5]-[F,​T]
BSTCADC10-[1-9.5/0.001]-[5-80/1]-[0-59/1]-[0.2-9.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
BSTCADC12-[1-11.5/0.001]-[5-80/1]-[0-59/1]-[0.2-11.3/0.001]-[0-30/1]-[0-59/1]-[0.5-36/0.5]-[F,​T]
BSTCADC12-[1-11.5/0.001]-[5-80/1]-[0-59/1]-[0.2-11.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
BSTCADC16-[1-15.5/0.001]-[5-80/1]-[0-59/1]-[0.2-15.3/0.001]-[0-30/1]-[0-59/1]-[0.5-48/0.5]-[F,​T]
BSTCADC16-[1-15.5/0.001]-[5-80/1]-[0-59/1]-[0.2-15.3/0.001]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM3-[1-2.5/0.01]-[5-80/1]-[0-59/1]-[0.2-2.3/0.01]-[0-30/1]-[0-59/1]-[0.5-10/0.5]-[F,​T]
STCADEM3-[1-2.5/0.01]-[5-80/1]-[0-59/1]-[0.2-2.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM4-[1-3.5/0.01]-[5-80/1]-[0-59/1]-[0.2-3.3/0.01]-[0-30/1]-[0-59/1]-[0.5-14/0.5]-[F,​T]
STCADEM4-[1-3.5/0.01]-[5-80/1]-[0-59/1]-[0.2-3.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM6-[1-4.5/0.01]-[5-80/1]-[0-59/1]-[0.2-4.3/0.01]-[0-30/1]-[0-59/1]-[0.5-22/0.5]-[F,​T]
STCADEM6-[1-4.5/0.01]-[5-80/1]-[0-59/1]-[0.2-4.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM8-[1-7.5/0.01]-[5-80/1]-[0-59/1]-[0.2-7.3/0.01]-[0-30/1]-[0-59/1]-[0.5-28/0.5]-[F,​T]
STCADEM8-[1-7.5/0.01]-[5-80/1]-[0-59/1]-[0.2-7.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM10-[1-9.5/0.01]-[5-80/1]-[0-59/1]-[0.2-9.3/0.01]-[0-30/1]-[0-59/1]-[0.5-35/0.5]-[F,​T]
STCADEM10-[1-9.5/0.01]-[5-80/1]-[0-59/1]-[0.2-9.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM12-[1-11.5/0.01]-[5-80/1]-[0-59/1]-[0.2-11.3/0.01]-[0-30/1]-[0-59/1]-[0.5-36/0.5]-[F,​T]
STCADEM12-[1-11.5/0.01]-[5-80/1]-[0-59/1]-[0.2-11.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
STCADEM16-[1-15.5/0.01]-[5-80/1]-[0-59/1]-[0.2-15.3/0.01]-[0-30/1]-[0-59/1]-[0.5-48/0.5]-[F,​T]
STCADEM16-[1-15.5/0.01]-[5-80/1]-[0-59/1]-[0.2-15.3/0.01]-[0-30/1]-[0-59/1]-[1D,​2D,​3D,​4D,​MAX]-[F,​T]
Part NumberMinimum order quantityVolume DiscountDays to ShipShank Diameter d
(mm)
Overall Length L
(mm)
Processing Applications Corner Angle (Single Angle)(θ1)
(°)
Corner Angle (Single Angle)(θ1)
(′)
Single Angle (θ2)
(°)
Single Angle (θ2)
(′)
1D 2D 3D 4D Additional Machined Flute Length Bottom Blade Shape FD Flute Diameter (D)
(mm)
Flute Length (ℓ)
(mm)
Tip Diameter (D1)
(mm)
Use
1 Piece(s) 10 Day(s) or more 340Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 2.50.5 ~ 100.2 ~ 2.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 340Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 2.5-0.2 ~ 2.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 450Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 3.50.5 ~ 140.2 ~ 3.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 450Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 3.5-0.2 ~ 3.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 660Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 5.50.5 ~ 220.2 ~ 5.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 660Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 5.5-0.2 ~ 5.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 860Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 7.50.5 ~ 280.2 ~ 7.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 860Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 7.5-0.2 ~ 7.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1080Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 9.50.5 ~ 350.2 ~ 9.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1080Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 9.5-0.2 ~ 9.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1280Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 11.50.5 ~ 360.2 ~ 11.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 1280Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 11.5-0.2 ~ 11.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 16100Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 15.50.5 ~ 480.2 ~ 15.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 16100Boss Hole Drilling5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 15.5-0.2 ~ 15.3For Boss Hole Drilling
1 Piece(s) 10 Day(s) or more 340Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 2.50.5 ~ 100.2 ~ 2.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 340Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 2.5-0.2 ~ 2.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 450Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 3.50.5 ~ 140.2 ~ 3.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 450Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 3.5-0.2 ~ 3.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 660Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 4.50.5 ~ 220.2 ~ 4.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 660Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 4.5-0.2 ~ 4.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 860Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 7.50.5 ~ 280.2 ~ 7.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 860Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 7.5-0.2 ~ 7.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1080Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 9.50.5 ~ 350.2 ~ 9.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1080Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 9.5-0.2 ~ 9.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1280Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 11.50.5 ~ 360.2 ~ 11.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 1280Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 11.5-0.2 ~ 11.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 16100Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-1 ~ 15.50.5 ~ 480.2 ~ 15.3For Radial Groove Milling
1 Piece(s) 10 Day(s) or more 16100Flank / Groove Processing5 ~ 800 ~ 590 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD1 ~ 15.5-0.2 ~ 15.3For Radial Groove Milling

Loading...

  1. 1

Specifications

Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number Flute Diameter
D

0.001 mm
Increment
Designation
Corner Angle
(single angle)* θ1
° - '
1' Increment
Designation
Tip Diameter
D
1
0.01 mm
Increment
Designation
Single Angle *
θ2
° - '
1' Increment
Designation
Flute Length *
0.5 mm Increment Designation
Bottom Blade
Shape
(Selection)
Overall Length
L
Shank Diameter
d
Specified Rangeℓ max.
BSTCADC
(For Boss Hole Drilling)
31.000 ~ 2.500


5°0' ~ 80°0'

θ1 > θ2 *
0.20 ≤ D1 ≤ (D-0.2)


0°15' ~ 30°00'

θ1 > θ2 *
(1) 0.5 ≤ ℓ ≤ D x 4
and
(2) ℓ≤ℓmax.
(refer to table on right)
and
Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image
10.0T
(Dished)

F
(Flat)
Bottom
Blade Shape
>>P.608
40
41.000 ~ 3.50014.050
61.000 ~ 5.50022.060
81.000 ~ 7.50028.060
101.000 ~ 9.50035.080
121.000 ~ 11.50036.080
161.000 ~ 15.50048.0100

 

Model Number Flute Diameter
D

0.01 mm
Increment
Designation
Corner Angle
(single angle)* θ1
° - '
1' Increment
Designation
Tip Diameter
D
1
0.01 mm
Increment
Designation
Single Angle *
θ2
° - '
1' Increment
Designation
Flute Length *
0.5 mm Increment Designation
Bottom Blade
Shape
(Selection)
Overall Length
L
Shank Diameter
d
Specified Rangeℓ max.
STCADEM
(For Side / Grooving)
31.00 ~ 2.50


5°0' ~ 80°0'

θ1 > θ2 *
0.20 ≤ D1 ≤ (D-0.2)


0°15' ~ 30°00'

θ1 > θ2 *
(1) 0.5 ≤ ℓ ≤ D x 4
and
(2) ℓ≤ℓmax.
(refer to table on right)
and
Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image
10.0T
(Dished)

F
(Flat)
Bottom
Blade Shape
>>P.608
40
41.00 ~ 3.50 14.050
61.00 ~ 4.50 22.060
81.00 ~ 7.50 28.060
101.00 ~ 9.50 35.080
121.00 ~ 11.50 36.080
161.00 ~ 15.5048.0100

* Specify ℓ to meet all of conditions (1), (2), (3).
*
Depending on the size of ℓ, the entire gradient angle may be blade length.
* For the corner angle (single angle)
θ1 and single angle θ2, specify the angles such that "θ1 > θ2".

Alterations

Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image
Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image
Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type:Related Image

Basic Information

Material Ultrafine Particulate Carbide

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)