(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide 2-Flute Square Alterations End Mill

Carbide 2-Flute Square Alterations End Mill

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Alterations end mill series with 6 simultaneous locations that can be specified

  • TS
  • General Steel
  • 2 Flutes

Carbide 2-Flute Square Additional Machining End Mill:Related Image

Part Number
T-TSC-EM2B4
T-TSC-EM2B4.5
T-TSC-EM2B5
T-TSC-EM2B5.5
T-TSC-EM2B6
T-TSC-EM2B8
T-TSC-EM2B10
T-TSC-EM2B12
T-TSC-EM2B14
T-TSC-EM2B16
T-TSC-EM2B20
T-TSC-EM2L4
T-TSC-EM2L4.5
T-TSC-EM2L5
T-TSC-EM2L5.5
T-TSC-EM2L6
T-TSC-EM2L8
T-TSC-EM2L10
T-TSC-EM2L12
T-TSC-EM2R4
T-TSC-EM2R4.5
T-TSC-EM2R5
T-TSC-EM2R5.5
T-TSC-EM2R6
T-TSC-EM2R7
T-TSC-EM2R8
T-TSC-EM2R9
T-TSC-EM2R10
T-TSC-EM2R12
T-TSC-EM2R14
T-TSC-EM2R16
T-TSC-EM2R20
T-TSC-EM2RL4
T-TSC-EM2RL5
T-TSC-EM2RL6
T-TSC-EM2RL8
T-TSC-EM2RL10
T-TSC-EM2RL12
T-TSC-EM2S4
T-TSC-EM2S4.5
T-TSC-EM2S5
T-TSC-EM2S5.5
T-TSC-EM2S6
T-TSC-EM2S7
T-TSC-EM2S8
T-TSC-EM2S9
T-TSC-EM2S10
T-TSC-EM2S12
T-TSC-EM2S14
T-TSC-EM2S16
T-TSC-EM2S20
T-TSC-EM2SR4
T-TSC-EM2SR5
T-TSC-EM2SR6
T-TSC-EM2SR8
T-TSC-EM2SR10
T-TSC-EM2SR12
T-TSC-PEM2B4
T-TSC-PEM2B5
T-TSC-PEM2B6
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Geometry Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Figure
1 Piece(s)Available 12 Day(s) or more 46With Lead6451
1 Piece(s)Available 12 Day(s) or more 4.56.75With Lead6451
1 Piece(s)Available 12 Day(s) or more 57.5With Lead6451
1 Piece(s)Available 12 Day(s) or more 5.58.25With Lead6451
1 Piece(s)Available 12 Day(s) or more 69With Lead6452
1 Piece(s)Available 12 Day(s) or more 812With Lead8602
1 Piece(s)Available 12 Day(s) or more 1015With Lead10702
1 Piece(s)Available 12 Day(s) or more 1218With Lead12752
1 Piece(s)Available 12 Day(s) or more 1421With Lead12753
1 Piece(s)Available 12 Day(s) or more 1624With Lead161002
1 Piece(s)Available 12 Day(s) or more 2030With Lead201052
1 Piece(s)Available 12 Day(s) or more 416With Lead6601
1 Piece(s)Available 12 Day(s) or more 4.518With Lead6601
1 Piece(s)Available 12 Day(s) or more 520With Lead6601
1 Piece(s)Available 12 Day(s) or more 5.522With Lead6601
1 Piece(s)Available 12 Day(s) or more 624With Lead6602
1 Piece(s)Available 12 Day(s) or more 832With Lead81002
1 Piece(s)Available 12 Day(s) or more 1040With Lead101002
1 Piece(s)Available 12 Day(s) or more 1248With Lead121002
1 Piece(s)Available 12 Day(s) or more 412With Lead6501
1 Piece(s)Available 12 Day(s) or more 4.513.5With Lead6501
1 Piece(s)Available 12 Day(s) or more 515With Lead6551
1 Piece(s)Available 12 Day(s) or more 5.516.5With Lead6551
1 Piece(s)Available 12 Day(s) or more 618With Lead6602
1 Piece(s)Available 12 Day(s) or more 721With Lead8651
1 Piece(s)Available 12 Day(s) or more 824With Lead8702
1 Piece(s)Available 12 Day(s) or more 927With Lead10751
1 Piece(s)Available 12 Day(s) or more 1030With Lead10802
1 Piece(s)Available 12 Day(s) or more 1236With Lead12852
1 Piece(s)Available 12 Day(s) or more 1442With Lead12953
1 Piece(s)Available 12 Day(s) or more 1648With Lead161102
1 Piece(s)Available 12 Day(s) or more 2060With Lead201302
1 Piece(s)Available 12 Day(s) or more 414With Lead6501
1 Piece(s)Available 12 Day(s) or more 517.5With Lead6551
1 Piece(s)Available 12 Day(s) or more 621With Lead6602
1 Piece(s)Available 12 Day(s) or more 828With Lead8702
1 Piece(s)Available 12 Day(s) or more 1035With Lead10802
1 Piece(s)Available 12 Day(s) or more 1242With Lead12952
1 Piece(s)Available 12 Day(s) or more 48With Lead6451
1 Piece(s)Available 12 Day(s) or more 4.59With Lead6451
1 Piece(s)Available 12 Day(s) or more 510With Lead6451
1 Piece(s)Available 12 Day(s) or more 5.511With Lead6451
1 Piece(s)Available 12 Day(s) or more 612With Lead6452
1 Piece(s)Available 12 Day(s) or more 714With Lead8501
1 Piece(s)Available 12 Day(s) or more 816With Lead8552
1 Piece(s)Available 12 Day(s) or more 918With Lead10601
1 Piece(s)Available 12 Day(s) or more 1020With Lead10652
1 Piece(s)Available 12 Day(s) or more 1224With Lead12752
1 Piece(s)Available 12 Day(s) or more 1428With Lead12803
1 Piece(s)Available 12 Day(s) or more 1632With Lead161052
1 Piece(s)Available 12 Day(s) or more 2040With Lead201102
1 Piece(s)Available 12 Day(s) or more 410With Lead6501
1 Piece(s)Available 12 Day(s) or more 512.5With Lead6551
1 Piece(s)Available 12 Day(s) or more 615With Lead6602
1 Piece(s)Available 12 Day(s) or more 820With Lead8702
1 Piece(s)Available 12 Day(s) or more 1025With Lead10802
1 Piece(s)Available 12 Day(s) or more 1230With Lead12852
1 Piece(s)Available 12 Day(s) or more 46Sharp Corner6451
1 Piece(s)Available 12 Day(s) or more 57.5Sharp Corner6451
1 Piece(s)Available 12 Day(s) or more 69Sharp Corner6452

Loading...

Specifications

Carbide 2-Flute Square Additional Machining End Mill:Related Image

■ Table of Standards
Shape Specification for Blade Edge -CR / -CC / -MK / -EF

Flute Diameter
D
(Selection)
-CR / -CC
0.1 mm Increment Designation
-MK
5° Increment Designation
2 ~ 2.8 No Standards No Standards
3, 3.5 60° ~ 135°
4, 4.5 0.1 ~ (D-2) / 2
5, 5.5
6, 7
8, 9 0.1 ~ 3.0
10
12
14
16
20

[ ! ]For the standards for the blade diameter (D), blade length (ℓ) and total length (L), refer to the page for the relevant model number.
[ ! ]When machining the radius, corner C, and flat bottom blade, grinding of the bottom blade is performed.
[ ! ]Machining the blade edge shape shortens the blade length (ℓ) and the total length (L) by approximately D x 0.5 (up to 5 mm).

Blade Diameter Specification -PP
Shank Additional Processing -KN/-LC

Nominal
No.
-PP
0.01 mm Increment Designation
4 3.70 ~ 3.99
4.5 4.01 ~ 4.49
5 4.51 ~ 4.99
5.5 5.01 ~ 5.49
6 5.51 ~ 5.99
7 6.51 ~ 6.99
8 7.51 ~ 7.99
9 8.51 ~ 8.99
10 9.51 ~ 9.99
12 11.51 ~ 11.99
14 13.51 ~ 13.99
16 15.51 ~ 15.99
20 19.51 ~ 19.99

 

Flute Diameter
D
(Selection)
Length Under Neck Specification
-KN
1 mm Increment Designation
Total Length Specification -LC
1 mm Increment Designation
Figure
2 ~ 5.5 KN ≥ + 5
and
KN ≤ L - 23
LC ≥ + 10 + 3d 1
6 KN ≥ + 5
and
KN ≤ L - 3d
2
7 1
8 2
9 1
10 2
12 LC ≥ + D + 3d
16
20

[ ! ]For the standards for the blade length (ℓ), total length (L), and shank diameter (d), refer to the page for the relevant model number.
[ ! ] When used together, specify the length under neck (KN) and the total length (LC) such that they are in the range given by LC ≥ KN + 3d + 5.
[ ! ] Specifying the length under neck (KN) indicates that the shank clearance diameter will be the blade diameter less 0.2 ~ 0.5 mm.

Specifications/Overview

Applicable Model Number Blade length ℓ  
Gash Land Sharp-Corner
TSC-SH-EM2B TSC-SH-PEM2B 1D Click here for product details
TSC-EM2B TSC-PEM2B 1.5D Click here for product details
TSC-EM2S TSC-PEM2S 2D Click here for product details
TSC-EM2SR TSC-PEM2SR 2.5D Click here for product details
TSC-EM2R TSC-PEM2R 3D Click here for product details
TSC-EM2RL TSC-PEM2RL 3.5D Click here for product details
TSC-EM2L TSC-PEM2L 4D Click here for product details

Alterations

Carbide 2-Flute Square Additional Machining End Mill:Related Image

Basic Information

Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper Model Square Number of Flutes(Pieces) 2
Processing Applications Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk Coating For High Hardness (Silicone-Based) Torsion Angle (θ) Standard Helix (30 to 40°)
Tolerance of OD(mm) 0 ~ -0.02

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)