(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model
  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole
·Long type allows machining of deep holes

PDF

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model:Related Image
Part Number
SEC-HP-RMSCL3-2-[0.3-2.995/0.005]-[0.5-15/0.5]-[F,​T]
SEC-HP-RMSCL4-2-[2.005-3.995/0.005]-[0.5-30/0.5]-[F,​T]
SEC-HP-RMSCL6-4-[3.005-5.995/0.005]-[3-34/0.5]-[F,​T]
SEC-HP-RMSCLZ3-2-[2-2.995/0.005]-[0.5-15/0.5]-[5-45/1]-[F,​T]
SEC-HP-RMSCLZ4-2-[2-3.995/0.005]-[0.5-20/0.5]-[5-45/1]-[F,​T]
SEC-HP-RMSCLZ6-[2,​4]-[3.005-5.995/0.005]-[3-34/0.5]-[5-45/1]-[F,​T]
SEC-RMSCL3-2-[0.3-2.995/0.005]-[0.5-15/0.5]-[F,​T]
SEC-RMSCL4-2-[2.005-3.995/0.005]-[0.5-30/0.5]-[F,​T]
SEC-RMSCL6-[2,​4]-[3.005-5.995/0.005]-[3-34/0.5]-[F,​T]
SEC-RMSCLZ3-2-[2-2.995/0.005]-[0.5-15/0.5]-[5-45/1]-[F,​T]
SEC-RMSCLZ4-2-[2-3.995/0.005]-[0.5-20/0.5]-[5-45/1]-[F,​T]
SEC-RMSCLZ6-[2,​4]-[3.005-5.995/0.005]-[3-34/0.5]-[5-45/1]-[F,​T]
Part NumberMinimum order quantityVolume DiscountDays to ShipTool Diameter
(mm)
Groove Length
(mm)
No. Bottom Blade Shape Diameter Tolerance
(mm)
Shank Diameter d
(mm)
Number of Flutes
(Sheet(s))
Overall Length L
(mm)
Neck Length (ℓ1)
(mm)
Number of Flutes Length Under Neck ℓ2
1 Piece(s) 10 Day(s) or more 0.3 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.0033260-2-
1 Piece(s) 10 Day(s) or more 2.005 ~ 3.9950.5 ~ 304F (Flat) / T (Center Dented)0 ~ 0.0034280-2-
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 346F (Flat) / T (Center Dented)0 ~ 0.00364100-4-
1 Piece(s) 10 Day(s) or more 2 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.00332605 ~ 452ℓ + ℓ1 ≦ 20
1 Piece(s) 10 Day(s) or more 2 ~ 3.9950.5 ~ 204F (Flat) / T (Center Dented)0 ~ 0.00342805 ~ 452ℓ + ℓ1 ≦ 50
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 346F (Flat) / T (Center Dented)0 ~ 0.003641005 ~ 452 ~ 4ℓ + ℓ1 ≦ 70
1 Piece(s) 10 Day(s) or more 0.3 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.0053260-2-
1 Piece(s) 10 Day(s) or more 2.005 ~ 3.9950.5 ~ 304F (Flat) / T (Center Dented)0 ~ 0.0054280-2-
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 346F (Flat) / T (Center Dented)0 ~ 0.00564100-2 ~ 4-
1 Piece(s) 10 Day(s) or more 2 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.00532605 ~ 452ℓ + ℓ1 ≦ 20
1 Piece(s) 10 Day(s) or more 2 ~ 3.9950.5 ~ 204F (Flat) / T (Center Dented)0 ~ 0.00542805 ~ 452ℓ + ℓ1 ≦ 50
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 346F (Flat) / T (Center Dented)0 ~ 0.005641005 ~ 452 ~ 4ℓ + ℓ1 ≦ 70

Loading...

  1. 1

Specifications

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model:Related Image

Model Number Number of Flutes
(Selection)
Blade Diameter
D
0.005 mm Increment
Designation
Blade Length

0.5 mm Increment Designation
Bottom Blade Shape
(Selection)
Overall Length
L
Shank Diameter
d
No.
SEC-RMSCL

SEC-HP-RMSCL
320.300 ~ 0.4950.5 ~1.0T
(Dished)
F
(Flat)
603
320.500 ~ 1.5000.5 ~5.0603
321.505 ~ 2.0000.5 ~ 10.0603
322.005 ~ 2.9950.5 ~ 15.0603
422.005 ~ 3.9950.5 ~ 30.0804
643.005 ~ 5.9953.0 ~ 34.01006

Model Number Number of Flutes
(Selection)
Blade Diameter
D
0.005 mm Increment Designation
Blade Length

0.5 mm Increment Designation
Neck Length
1
1 mm Increment Designation
Bottom Blade Shape
(Selection)
Length Under Neck
Specified Range
ℓ2
Overall Length
L
Shank Diameter
d
No.
SEC-RMSCLZ
SEC-HP-RMSCLZ
322.000 ~ 2.9950.5 ~ 15.05 ≦ 1 ≦ 45T
(Dished)
F
(Flat)
ℓ + ℓ1 ≦ 20603
422.000 ~ 3.9950.5 ~ 20.0ℓ + ℓ1 ≦ 50804
62
4
3.005 ~ 5.9953.0 ~ 34.0ℓ + ℓ1 ≦ 701006
* The combined dimensions of the blade length () and neck length (1) will be within the length under neck (2) designation range given above.

For Cutting Conditions, Refer to >>Click here.

More Information

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model:Related Image

Alterations

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model:Related Image
Model NumberCoating
Addition
SEC-RMSCL
SEC-RMSCLZ
SEC-HP-RMSCL-
SEC-HP-RMSCLZ-

Coating

Basic Information

Shank type End Mill Shank Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper Coating Presence None
Groove Shape Straight Base-Blade Availability Included Tool Material Type Carbide

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)