(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model (Part Numbers)

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model
  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

[Features]
·Since it has end flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the burnishing function
·Direct reaming is possible without correction by an end mill after drilling a pilot hole

PDF

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model:Related Image
Part Number
SEC-HP-RMSCC3-2-[0.4-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[F,​T]
SEC-HP-RMSCC4-2-[2.005-3.995/0.005]-[0.1-1.89/0.01]-[0.5-20/0.5]-[F,​T]
SEC-HP-RMSCC6-[2,​4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-24/0.5]-[F,​T]
SEC-HP-RMSCCZ3-2-[2-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[5-20/1]-[F,​T]
SEC-HP-RMSCCZ4-2-[2-3.995/0.005]-[0.1-1.89/0.01]-[0.5-20/0.5]-[5-20/1]-[F,​T]
SEC-HP-RMSCCZ6-[2,​4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-24/0.5]-[5-20/1]-[F,​T]
SEC-RMSCC3-2-[0.4-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[F,​T]
SEC-RMSCC4-2-[2.005-3.995/0.005]-[0.1-1.89/0.01]-[0.5-20/0.5]-[F,​T]
SEC-RMSCC6-[2,​4]-[3.005-5.995/0.005]-[0.1-2.8/0.01]-[3-24/0.5]-[F,​T]
SEC-RMSCC8-[2,​4]-[4.005-7.995/0.005]-[0.1-3.8/0.01]-[4-28/0.5]-[F,​T]
SEC-RMSCC10-[2,​4]-[6.005-9.995/0.005]-[0.1-4.8/0.01]-[5-35/0.5]-[F,​T]
SEC-RMSCC12-[2,​4]-[8.005-11.995/0.005]-[0.1-5.8/0.01]-[6-36/0.5]-[F,​T]
SEC-RMSCC16-[2,​4]-[10.005-15.995/0.005]-[0.1-7.8/0.01]-[8-48/0.5]-[F,​T]
SEC-RMSCCZ3-2-[2-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[5-20/1]-[F,​T]
SEC-RMSCCZ4-2-[2-3.995/0.005]-[0.1-1.89/0.01]-[0.5-20/0.5]-[5-20/1]-[F,​T]
SEC-RMSCCZ6-[2,​4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-24/0.5]-[5-20/1]-[F,​T]
Part NumberMinimum order quantityVolume DiscountDays to ShipTool Diameter
(mm)
Groove Length
(mm)
No. Bottom Blade Shape Diameter Tolerance
(mm)
Shank Diameter d
(mm)
Overall Length L
(mm)
Corner (C)
(mm)
Neck Length (ℓ1)
(mm)
Number of Flutes Length Under Neck ℓ2
1 Piece(s) 10 Day(s) or more 0.4 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.0033400.1 ~ 1.39-2-
1 Piece(s) 10 Day(s) or more 2.005 ~ 3.9950.5 ~ 204F (Flat) / T (Center Dented)0 ~ 0.0034500.1 ~ 1.89-2-
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 246F (Flat) / T (Center Dented)0 ~ 0.0036600.1 ~ 2.89-2 ~ 4-
1 Piece(s) 10 Day(s) or more 2 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.0033400.1 ~ 1.395 ~ 202ℓ + ℓ1 ≦ 20
1 Piece(s) 10 Day(s) or more 2 ~ 3.9950.5 ~ 204F (Flat) / T (Center Dented)0 ~ 0.0034500.1 ~ 1.895 ~ 202ℓ + ℓ1 ≦ 25
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 246F (Flat) / T (Center Dented)0 ~ 0.0036600.1 ~ 2.895 ~ 202 ~ 4ℓ + ℓ1 ≦ 35
1 Piece(s) 10 Day(s) or more 0.4 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.0053400.1 ~ 1.39-2-
1 Piece(s) 10 Day(s) or more 2.005 ~ 3.9950.5 ~ 204F (Flat) / T (Center Dented)0 ~ 0.0054500.1 ~ 1.89-2-
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 246F (Flat) / T (Center Dented)0 ~ 0.0056600.1 ~ 2.8-2 ~ 4-
1 Piece(s) 10 Day(s) or more 4.005 ~ 7.9954 ~ 288F (Flat) / T (Center Dented)0 ~ 0.0058600.1 ~ 3.8-2 ~ 4-
1 Piece(s) 10 Day(s) or more 6.005 ~ 9.9955 ~ 3510F (Flat) / T (Center Dented)0 ~ 0.00510800.1 ~ 4.8-2 ~ 4-
1 Piece(s) 10 Day(s) or more 8.005 ~ 11.9956 ~ 3612F (Flat) / T (Center Dented)0 ~ 0.00512800.1 ~ 5.8-2 ~ 4-
1 Piece(s) 10 Day(s) or more 10.005 ~ 15.9958 ~ 4816F (Flat) / T (Center Dented)0 ~ 0.005161000.1 ~ 7.8-2 ~ 4-
1 Piece(s) 10 Day(s) or more 2 ~ 2.9950.5 ~ 153F (Flat) / T (Center Dented)0 ~ 0.0053400.1 ~ 1.395 ~ 202ℓ + ℓ1 ≦ 20
1 Piece(s) 10 Day(s) or more 2 ~ 3.9950.5 ~ 204F (Flat) / T (Center Dented)0 ~ 0.0054500.1 ~ 1.895 ~ 202ℓ + ℓ1 ≦ 25
1 Piece(s) 10 Day(s) or more 3.005 ~ 5.9953 ~ 246F (Flat) / T (Center Dented)0 ~ 0.0056600.1 ~ 2.895 ~ 202 ~ 4ℓ + ℓ1 ≦ 35

Loading...

  1. 1

Specifications

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model:Related Image

Model Number Number of Flutes
(Selection)
Flute Diameter
D
0.005 mm Increment Designation
Corner
C
0.01 mm Increment
Designation
Blade Length

0.5 mm Increment Designation
Bottom Blade Shape
(Selection)
Overall Length
L
Shank Diameter
d
No.
SEC-RMSCC

SEC-HP-RMSCC
(No.3 ~ No.6
only can be designated)
320.400 ~ 0.4950.10 ≤ C ≤ (D-0.2) / 20.5 ~ 1.0T
(Dished)


F
(Flat)
>>P.994
403
320.500 ~ 1.5000.5 ~ 5.0403
321.505 ~ 2.0000.5 ~ 10.0403
322.005 ~ 2.9950.5 ~ 15.0403
422.005 ~ 3.9950.5 ~ 20.0504
62

4
3.005 ~ 5.9953.0 ~ 24.0606
84.005 ~ 7.9954.0 ~ 28.0608
106.005 ~ 9.9955.0 ~ 35.08010
128.005 ~ 11.9956.0 ~ 36.08012
1610.005 ~ 15.9958.0 ~ 48.010016
* The type with high-accuracy blade diameter tolerance applies to sizes No.3 to No.6.

Model Number Number of Flutes
(Selection)
Flute Diameter
D
0.005 mm Increment Designation
Corner
C
0.01 mm Increment Designation
Blade Length

0.5 mm Increment Designation
Neck Length
1
1 mm Increment Designation
Bottom Blade Shape
(Selection)
Length Under Neck
Specified Range
ℓ2
Overall Length
L
Shank Diameter
d
No.
SEC-RMSCCZ
SEC-HP-RMSCCZ
322.000 ~ 2.9950.10 ≤ C ≤ (D-0.2) / 20.5 ~ 15.05 ≤ 1 ≤ 20T
(Dished)
F
(Flat)
ℓ + ℓ1 ≤ 20
403
422.000 ~ 3.9950.5 ~ 20.0ℓ + ℓ1 ≤ 25
504
62
4
3.005 ~ 5.9953.0 ~ 24.0ℓ + ℓ1 ≤ 35606
* The combined dimensions of the blade length (ℓ) and neck length (ℓ1) will be within the length under neck (ℓ2) designation range given above.

For Cutting Conditions, Refer to >>Click here.

Alterations

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model:Related Image
Model NumberCoating
Addition
SEC-RMSCC
SEC-RMSCCZ
SEC-HP-RMSCC-
SEC-HP-RMSCCZ-

Coating
How to Order / Charge Details >>Click here.

Basic Information

Shank type End Mill Shank Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper Coating Presence None
Groove Shape Straight Base-Blade Availability Included Tool Material Type Carbide

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)