(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Cutting Fiber (Part Numbers)

Cutting Fiber
  • Volume Discount

[Features]
·Brush wire rod: ceramic fiber abrasive stone realizes high grinding ability
·Reduces wire rod spread during use
[Application]
·Ideal for automating fine deburring

(i)Caution

  • Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.
Cutting Fiber:Related Image
Part Number
CFM-B-2
CFM-S-2
Part NumberMinimum order quantityVolume DiscountDays to ShipDiameter D1
(mm)
Product Model Wire Model Shaft Diameter D2
(mm)
Sleeve Diameter D3
(mm)
Total Length L2
(mm)
Shaft Length L3
(mm)
Wire Length L1 Compatible Sleeve
1 Piece(s)Available 8 Day(s) or more 25Cap ModelRed----75CFM-S-2
1 Piece(s)Available 8 Day(s) or more -Sleeve-83014030--

Loading...

  1. 1

Specifications

Cutting Fiber:Related Image
● Brush
Model NumberNo.Wire TypeDiameter
D1
Wire Length
L1
Compatible Sleeve● Stocked Item
□ Non-Stocked Item
CFM−BR100Red10075CFM−S−100
R 6060CFM−S−60
140CFM−S−1
225CFM−S−2
31550CFM−S−3
4630CFM−S−4
W100White10075CFM−S−100
W 6060CFM−S−60
540CFM−S−1
625CFM−S−2
71550CFM−S−3
8630CFM−S−4
CFM−B−HP
15Pink1550CFM−S−3
3330

[ ! ] The brush is used with a sleeve as a set.

● Sleeve
Model NumberNo.Shaft Diameter
D2
Sleeve Diameter
D3
Total Length
L2
Shaft Length
L3
● Stocked Item
□ Non-Stocked Item
CFM−S1001611016240
60126515035
184514030
283014030
36189029
46107029

More Information

■ Usage
● Efficiently removing extremely fine burrs produced after machining with a base thickness of 0.1 mm or less.
 ● It is suitable for machining with a machining center, dedicated machine or drilling machine and enables easy automation.
 ● It is ideal for surface grinding and removing extremely fine burrs on parts of cars, aircrafts and machines.
 ● It greatly improves surface roughness in a short time to reduce the time taken for the polishing process.


A brush wire is used instead of a ceramic fiber stick grindstone.
The wire tip has excellent cutting ability.
The wire will not spread as it is used.

■ About the wire
● The white is thick, durable and excellent in cutting properties. For hard ferrous work materials.
● The red is thinner than the white, with excellent fitting and is suitable for removing extremely fine burrs. For free-cutting material.
● The pink is the softest and only removes burrs while preventing edge undercut.

■ Operating Precautions
[Maximum operating rotation speed]
● It is dangerous to exceed the maximum operating rotation speed since the brush may break.
[Cut Depth / Cutting Load]
● It is not efficient and also shortens the life of the brush due to rapid wire abrasion if the product is used with an excessive cut depth or cutting load.
● It is most effective to cut material at the wire tip.
[Adjusting Wire Protrusion Amount]
● Use it after adjusting flexibility and traceability by mounting a sleeve (outer cylinder part) to the outer circumference of the brush body to adjust the wire protrusion amount from the sleeve. Flexibility and traceability improve with an increased protrusion amount and worsen with a decreased protrusion amount. It is dangerous to exceed the protrusion amount since the brush may break.
[Hair Length]
● When the total length of the wire (hair length) is shortened as you use the product, its cutting ability tends to increase and its fitting tends to decrease. Therefore, adjust its cutting ability and fitting by reducing the rotation speed / cut depth.
[Dry / Wet Machining]
● Both dry and wet machining are possible. Wet machining has a slightly better cutting ability. Collect the dust generated with dry machining with a device such as a dust collector.

■ How to Use (Recommended Machining Conditions for Removing Extremely Fine Burrs)
Diameter
D1
Maximum Operating
Rotation Speed
(min-1)
Feed
(mm/min)
Cut Depth
(mm)
Brush Protrusion Amount
(mm)
1001,2002,400
(When Removing Burrs)

1,000
(When Polishing)
1.0
(Hard Material such as Iron)

0.5
(Soft Material such as Aluminum)
15
602,000
403,000
255,000
156,00010
610,0005


 * Test at 80% of the maximum operation rotation speed.
 * Feed speed is in inverse proportion to cutting ability. When the feed is doubled, the cutting amount will be decreased by half.
 * Use a float holder (P.983) for more stable machining.

Cutting Fiber:Related Image

Example

Cutting Fiber:Related Image

Cutting Fiber:Related Image

Basic Information

Product Model Automatic Commodity Contents Brush

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)