(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices

  • Non-Coated
  • Aluminum
  • 2 Flutes

PDF

Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model:Related Image

Part Number
XEL-ALHEM2S0.5
XEL-ALHEM2S1
XEL-ALHEM2S1.5
XEL-ALHEM2S2
XEL-ALHEM2S2.5
XEL-ALHEM2S3
XEL-ALHEM2S4
XEL-ALHEM2S5
XEL-ALHEM2S6
XEL-ALHEM2S8
XEL-ALHEM2S10
XEL-ALHEM2S12
XEL-ALHEM2S16
XEL-ALHEM2S20
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Figure
1 Piece(s)Available 8 Day(s) or more 0.514401
1 Piece(s)Available 8 Day(s) or more 124401
1 Piece(s)Available 8 Day(s) or more 1.534401
1 Piece(s)Available 8 Day(s) or more 244401
1 Piece(s)Available 8 Day(s) or more 2.554401
1 Piece(s)Available 8 Day(s) or more 366501
1 Piece(s)Available 8 Day(s) or more 486501
1 Piece(s)Available 8 Day(s) or more 5106551
1 Piece(s)Available 8 Day(s) or more 6126552
1 Piece(s)Available 8 Day(s) or more 8168652
1 Piece(s)Available 8 Day(s) or more 102010752
1 Piece(s)Available 8 Day(s) or more 122412802
1 Piece(s)Available 8 Day(s) or more 1632161052
1 Piece(s)Available 8 Day(s) or more 2040201102

Loading...

  1. 1

Specifications

Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model:Related Image

 

Model Number   Flute Length
Overall Length
L
Shank Diameter
d
Figure
Outer Diameter
D
XEL-ALHEM2S 0.5 1 40 4 1
1 2 40 4 1
1.5 3 40 4 1
2 4 40 4 1
2.5 5 40 4 1
3 6 50 6 1
4 8 50 6 1
5 10 55 6 1
6 12 55 6 2
8 16 65 8 2
10 20 75 10 2
12 24 80 12 2
16 32 105 16 2
20 40 110 20 2


For Cutting Conditions, Refer to >>Click here.

More Information


A high-accuracy finish can be achieved by adopting a unique shape for the side face cutting edge designed to improve surface quality when machining aluminum.
It adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
High-speed / high efficiency machining is possible with little chatter. 


Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model:Related Image

Basic Information

Work Material Aluminum Alloy / Copper Alloy / Resin Number of Flutes(sheet) 2 Model Square
Coating Non-Coated Processing Applications Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk Torsion Angle (θ) Powerful Helix (45° to 60°)
Additional Classification Stocked Product Tolerance of OD(mm) 0 ~ -0.02 ● Inventory Product □ Manufacturer Product

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)