(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

VAC Series Carbide 2-Flute Radius End Mill

VAC Series Carbide 2-Flute Radius End Mill
  • Volume Discount

[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

VAC Series Carbide 2-Flute Radius End Mill:Related Image
Part Number
SN-VAC-CR-EM2R6-R0.1-[20-72/1]-15
SN-VAC-CR-EM2R6-R0.2-[20-72/1]-15
SN-VAC-CR-EM2R6-R0.3-[20-72/1]-15
SN-VAC-CR-EM2R6-R0.5-60-[20-42/1]-15
SN-VAC-CR-EM2R6-R0.5-[20-72/1]-15
SN-VAC-CR-EM2R6-R1-[20-72/1]-15
SN-VAC-CR-EM2R8-R0.2-[25-76/1]-20
SN-VAC-CR-EM2R8-R0.5-70-[25-46/1]-20
SN-VAC-CR-EM2R8-R0.5-[25-76/1]-20
SN-VAC-CR-EM2R8-R1-[25-76/1]-20
SN-VAC-CR-EM2R8-R2-[25-76/1]-20
SN-VAC-CR-EM2R10-R0.2-[30-70/1]-25
SN-VAC-CR-EM2R10-R0.3-[30-70/1]-25
SN-VAC-CR-EM2R10-R0.5-[30-70/1]-25
SN-VAC-CR-EM2R10-R1-[30-70/1]-25
SN-VAC-CR-EM2R10-R2-[30-70/1]-25
SN-VAC-CR-EM2R12-R0.2-[35-74/1]-30
SN-VAC-CR-EM2R12-R0.3-[35-74/1]-30
SN-VAC-CR-EM2R12-R0.5-[35-74/1]-30
SN-VAC-CR-EM2R12-R1-80-[35-44/1]-30
SN-VAC-CR-EM2R12-R1-130-[35-94/1]-30
SN-VAC-CR-EM2R12-R1-[35-74/1]-30
SN-VAC-CR-EM2R12-R2-[35-74/1]-30
SN-VAC-CR-EM2R12-R3-[35-74/1]-30
SNR-VAC-CR-EM2R6-R0.1-[20-60/1]-[5-15/1]
SNR-VAC-CR-EM2R6-R0.2-[20-60/1]-[5-15/1]
SNR-VAC-CR-EM2R6-R0.3-[20-60/1]-[5-15/1]
SNR-VAC-CR-EM2R6-R0.5-60-[20-35/1]-[5-15/1]
SNR-VAC-CR-EM2R6-R0.5-[20-60/1]-[5-15/1]
SNR-VAC-CR-EM2R6-R1-[20-60/1]-[5-15/1]
SNR-VAC-CR-EM2R8-R0.2-[25-60/1]-[5-20/1]
SNR-VAC-CR-EM2R8-R0.5-70-[25-40/1]-[5-20/1]
SNR-VAC-CR-EM2R8-R0.5-[25-60/1]-[5-20/1]
SNR-VAC-CR-EM2R8-R1-[25-60/1]-[5-20/1]
SNR-VAC-CR-EM2R8-R2-[25-60/1]-[5-20/1]
SNR-VAC-CR-EM2R10-R0.2-[30-70/1]-[5-25/1]
SNR-VAC-CR-EM2R10-R0.3-[30-70/1]-[5-25/1]
SNR-VAC-CR-EM2R10-R0.5-[30-70/1]-[5-25/1]
SNR-VAC-CR-EM2R10-R1-[30-70/1]-[5-25/1]
SNR-VAC-CR-EM2R10-R2-[30-70/1]-[5-25/1]
SNR-VAC-CR-EM2R12-R0.2-[35-70/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R0.3-[35-70/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R0.5-[35-70/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R1-80-[35-45/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R1-130-[35-80/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R1-[35-70/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R2-[35-70/1]-[5-30/1]
SNR-VAC-CR-EM2R12-R3-[35-70/1]-[5-30/1]
VAC-CR-EM2R1-R0.1
VAC-CR-EM2R1-R0.2
VAC-CR-EM2R1.5-R0.2
VAC-CR-EM2R1.5-R0.3
VAC-CR-EM2R2-R0.2
VAC-CR-EM2R2-R0.3
VAC-CR-EM2R2-R0.5
VAC-CR-EM2R3-R0.1
VAC-CR-EM2R3-R0.2
VAC-CR-EM2R3-R0.3
VAC-CR-EM2R3-R0.5
VAC-CR-EM2R4-R0.2
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
R Size
(mm)
Work Material Flute Length (ℓ)
(mm)
Model Overall Length (L)
(mm)
Shank Diameter (d)
(mm)
Processing Applications Figure
1 Piece(s) 10 Day(s) or more 60.1---90---
1 Piece(s) 10 Day(s) or more 60.2---90---
1 Piece(s) 10 Day(s) or more 60.3---90---
1 Piece(s) 10 Day(s) or more 60.5---60---
1 Piece(s) 10 Day(s) or more 60.3---90---
1 Piece(s) 10 Day(s) or more 61---90---
1 Piece(s) 10 Day(s) or more 80.2---100---
1 Piece(s) 10 Day(s) or more 80.5---70---
1 Piece(s) 10 Day(s) or more 80.5---100---
1 Piece(s) 10 Day(s) or more 81---100---
1 Piece(s) 10 Day(s) or more 82---100---
1 Piece(s) 10 Day(s) or more 100.2---100---
1 Piece(s) 10 Day(s) or more 100.3---100---
1 Piece(s) 10 Day(s) or more 100.5---100---
1 Piece(s) 10 Day(s) or more 101---100---
1 Piece(s) 10 Day(s) or more 102---100---
1 Piece(s) 10 Day(s) or more 120.2---110---
1 Piece(s) 10 Day(s) or more 120.3---110---
1 Piece(s) 10 Day(s) or more 120.5---110---
1 Piece(s) 10 Day(s) or more 121---80---
1 Piece(s) 10 Day(s) or more 121---130---
1 Piece(s) 10 Day(s) or more 121---110---
1 Piece(s) 10 Day(s) or more 122---110---
1 Piece(s) 10 Day(s) or more 123---110---
1 Piece(s) 10 Day(s) or more 60.1---90---
1 Piece(s) 10 Day(s) or more 60.2---90---
1 Piece(s) 10 Day(s) or more 60.3---90---
1 Piece(s) 10 Day(s) or more 60.5---60---
1 Piece(s) 10 Day(s) or more 60.5---90---
1 Piece(s) 10 Day(s) or more 61---90---
1 Piece(s) 10 Day(s) or more 80.2---100---
1 Piece(s) 10 Day(s) or more 80.5---70---
1 Piece(s) 10 Day(s) or more 80.5---100---
1 Piece(s) 10 Day(s) or more 81---100---
1 Piece(s) 10 Day(s) or more 82---100---
1 Piece(s) 10 Day(s) or more 100.2---100---
1 Piece(s) 10 Day(s) or more 100.3---100---
1 Piece(s) 10 Day(s) or more 100.5---100---
1 Piece(s) 10 Day(s) or more 101---100---
1 Piece(s) 10 Day(s) or more 102---100---
1 Piece(s) 10 Day(s) or more 120.2---110---
1 Piece(s) 10 Day(s) or more 120.3---110---
1 Piece(s) 10 Day(s) or more 120.5---110---
1 Piece(s) 10 Day(s) or more 121---80---
1 Piece(s) 10 Day(s) or more 121---130---
1 Piece(s) 10 Day(s) or more 121---110---
1 Piece(s) 10 Day(s) or more 122---110---
1 Piece(s) 10 Day(s) or more 123---110---
1 Piece(s)Available 8 Day(s) or more 10.1General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]2.5Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 10.2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]2.5Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 1.50.2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]4Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 1.50.3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]4Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 20.2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]6Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 20.3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]6Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 20.5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]6Radius506Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 30.1General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]8Radius606Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 30.2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]8Radius606Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 30.3General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]8Radius606Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 30.5General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]8Radius606Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1
1 Piece(s)Available 8 Day(s) or more 40.2General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]10Radius706Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting1

Loading...

Specifications

VAC Series Carbide 2-Flute Radius End Mill:Related Image

Model Number
VAC-CR-EM2R
Flute Diameter
D
Radius
R
Overall Length
L
Overall Length
L
Blade Length
Shank Diameter
d
Figure
10.10.2     -502.561
1.5 0.20.3    -50461
2 0.20.30.5   -50661
30.10.20.30.5   -60861
4 0.20.30.51  -701061
5    1  -901361
6   0.5   60601562
0.10.20.30.51  -901562
8   0.5   70702082
 0.2 0.512 -1002082
10 0.20.30.512 -10025102
12   0.51  808030122
 0.20.30.5123-11030122
    1  13013030122

Example


The standard with a small R tolerance has been adopted.
Capable of high-hardness machining up to 55 HRC.
[ ! ]The electrical conductivity is minimal.
 

Basic Information

Number of Flutes(sheet) 2

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)