(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

VAC Series Carbide 2-Flute Long Neck Square End Mill

VAC Series Carbide 2-Flute Long Neck Square End Mill
  • Volume Discount

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

VAC Series Carbide 2-Flute Long Neck Square End Mill:Related Image

VAC Series Features

Uses a High Quality Base Material

 XAL SeriesVAC Series
 Micro Granules (MG)Super-Micro Granules (SMG)
CO (%)
Cobalt Content
1012
WC (%)
Tungsten Carbide Content
9088
Tungsten Granule Diameter (μ)0.80.5
Hardness (HRA)91.392.3
 VAC Series Carbide 2-Flute Long Neck Square End Mill:Related ImageVAC Series Carbide 2-Flute Long Neck Square End Mill:Related Image

VAC Series Carbide 2-Flute Long Neck Square End Mill:Related Image

Contributes to Improved Blade Accuracy / Quality

Part Number
VAC-PEM2LB0.2-0.5
VAC-PEM2LB0.2-1
VAC-PEM2LB0.3-1
VAC-PEM2LB0.3-2
VAC-PEM2LB0.3-3
VAC-PEM2LB0.4-1
VAC-PEM2LB0.4-2
VAC-PEM2LB0.4-3
VAC-PEM2LB0.4-4
VAC-PEM2LB0.5-2
VAC-PEM2LB0.5-3
VAC-PEM2LB0.5-4
VAC-PEM2LB0.5-5
VAC-PEM2LB0.5-6
VAC-PEM2LB0.6-2
VAC-PEM2LB0.6-3
VAC-PEM2LB0.6-4
VAC-PEM2LB0.6-5
VAC-PEM2LB0.6-6
VAC-PEM2LB0.6-8
VAC-PEM2LB0.7-4
VAC-PEM2LB0.8-2
VAC-PEM2LB0.8-3
VAC-PEM2LB0.8-4
VAC-PEM2LB0.8-6
VAC-PEM2LB0.8-8
VAC-PEM2LB0.8-10
VAC-PEM2LB1-2
VAC-PEM2LB1-3
VAC-PEM2LB1-4
VAC-PEM2LB1-5
VAC-PEM2LB1-6
VAC-PEM2LB1-8
VAC-PEM2LB1-10
VAC-PEM2LB1-12
VAC-PEM2LB1-16
VAC-PEM2LB1.2-6
VAC-PEM2LB1.2-8
VAC-PEM2LB1.2-10
VAC-PEM2LB1.2-12
VAC-PEM2LB1.5-4
VAC-PEM2LB1.5-6
VAC-PEM2LB1.5-8
VAC-PEM2LB1.5-10
VAC-PEM2LB1.5-12
VAC-PEM2LB1.5-14
VAC-PEM2LB1.5-16
VAC-PEM2LB2-6
VAC-PEM2LB2-8
VAC-PEM2LB2-10
VAC-PEM2LB2-12
VAC-PEM2LB2-14
VAC-PEM2LB2-16
VAC-PEM2LB2-20
VAC-PEM2LB2-30
VAC-PEM2LB3-8
VAC-PEM2LB3-10
VAC-PEM2LB3-12
VAC-PEM2LB3-14
VAC-PEM2LB3-16
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Figure
1 Piece(s)Available 8 Day(s) or more 0.20.34400.51
1 Piece(s)Available 8 Day(s) or more 0.20.344011
1 Piece(s)Available 8 Day(s) or more 0.30.544011
1 Piece(s)Available 8 Day(s) or more 0.30.544021
1 Piece(s)Available 8 Day(s) or more 0.30.544031
1 Piece(s)Available 8 Day(s) or more 0.40.644011
1 Piece(s)Available 8 Day(s) or more 0.40.644021
1 Piece(s)Available 8 Day(s) or more 0.40.644031
1 Piece(s)Available 8 Day(s) or more 0.40.644041
1 Piece(s)Available 8 Day(s) or more 0.50.744521
1 Piece(s)Available 8 Day(s) or more 0.50.744531
1 Piece(s)Available 8 Day(s) or more 0.50.744541
1 Piece(s)Available 8 Day(s) or more 0.50.744551
1 Piece(s)Available 8 Day(s) or more 0.50.744561
1 Piece(s)Available 8 Day(s) or more 0.60.944521
1 Piece(s)Available 8 Day(s) or more 0.60.944531
1 Piece(s)Available 8 Day(s) or more 0.60.944541
1 Piece(s)Available 8 Day(s) or more 0.60.944551
1 Piece(s)Available 8 Day(s) or more 0.60.944561
1 Piece(s)Available 8 Day(s) or more 0.60.944581
1 Piece(s)Available 8 Day(s) or more 0.71.244541
1 Piece(s)Available 8 Day(s) or more 0.81.244521
1 Piece(s)Available 8 Day(s) or more 0.81.244531
1 Piece(s)Available 8 Day(s) or more 0.81.244541
1 Piece(s)Available 8 Day(s) or more 0.81.244561
1 Piece(s)Available 8 Day(s) or more 0.81.244581
1 Piece(s)Available 8 Day(s) or more 0.81.2445101
1 Piece(s)Available 8 Day(s) or more 11.545021
1 Piece(s)Available 8 Day(s) or more 11.545031
1 Piece(s)Available 8 Day(s) or more 11.545041
1 Piece(s)Available 8 Day(s) or more 11.545051
1 Piece(s)Available 8 Day(s) or more 11.545061
1 Piece(s)Available 8 Day(s) or more 11.545081
1 Piece(s)Available 8 Day(s) or more 11.5450101
1 Piece(s)Available 8 Day(s) or more 11.5450121
1 Piece(s)Available 8 Day(s) or more 11.5450161
1 Piece(s)Available 8 Day(s) or more 1.21.845061
1 Piece(s)Available 8 Day(s) or more 1.21.845081
1 Piece(s)Available 8 Day(s) or more 1.21.8450101
1 Piece(s)Available 8 Day(s) or more 1.21.8450121
1 Piece(s)Available 8 Day(s) or more 1.52.345041
1 Piece(s)Available 8 Day(s) or more 1.52.345061
1 Piece(s)Available 8 Day(s) or more 1.52.345081
1 Piece(s)Available 8 Day(s) or more 1.52.3450101
1 Piece(s)Available 8 Day(s) or more 1.52.3450121
1 Piece(s)Available 8 Day(s) or more 1.52.3450141
1 Piece(s)Available 8 Day(s) or more 1.52.3450161
1 Piece(s)Available 8 Day(s) or more 2345061
1 Piece(s)Available 8 Day(s) or more 2345081
1 Piece(s)Available 8 Day(s) or more 23450101
1 Piece(s)Available 8 Day(s) or more 23450121
1 Piece(s)Available 8 Day(s) or more 23450141
1 Piece(s)Available 8 Day(s) or more 23450161
1 Piece(s)Available 8 Day(s) or more 23450201
1 Piece(s)Available 8 Day(s) or more 23470301
1 Piece(s)Available 8 Day(s) or more 34.565081
1 Piece(s)Available 8 Day(s) or more 34.5650101
1 Piece(s)Available 8 Day(s) or more 34.5650121
1 Piece(s)Available 8 Day(s) or more 34.5660141
1 Piece(s)Available 8 Day(s) or more 34.5660161

Loading...

Specifications

VAC Series Carbide 2-Flute Long Neck Square End Mill:Related Image

Model Number
VAC-PEM2LB
Flute Diameter
D
Length Under Neck
1
Blade Length
Overall Length
L
Shank Diameter
d
Actual Effective Length Depends on Work Inclination AngleFigure
0.5°1.5°
0.20.50.34040.62 0.65 0.69 0.73 0.83 1
11.14 1.20 1.27 1.35 1.54 1
0.310.54041.14 1.20 1.27 1.35 1.54 1
22.19 2.31 2.45 2.60 2.97 1
33.25 3.42 3.62 3.85 4.39 1
0.410.64041.14 1.20 1.27 1.35 1.54 1
22.19 2.31 2.45 2.60 2.97 1
33.25 3.42 3.62 3.85 4.39 1
44.30 4.53 4.80 5.09 5.81 1
0.520.74542.25 2.38 2.52 2.67 3.05 1
33.31 3.49 3.69 3.92 4.47 1
44.36 4.60 4.86 5.16 5.89 1
55.41 5.71 6.04 6.41 7.32 1
66.46 6.82 7.21 7.66 8.74 1
0.620.94542.25 2.38 2.52 2.67 3.05 1
33.31 3.49 3.69 3.92 4.47 1
44.36 4.60 4.86 5.16 5.89 1
55.41 5.71 6.04 6.41 7.32 1
66.46 6.82 7.21 7.66 8.74 1
88.57 9.04 9.56 10.15 11.41 1
0.741.24544.36 4.60 4.86 5.16 5.89 1
0.821.24542.25 2.38 2.52 2.67 3.05 1
33.31 3.49 3.69 3.92 4.47 1
44.36 4.60 4.86 5.16 5.89 1
66.46 6.82 7.21 7.66 8.74 1
88.57 9.04 9.56 10.15 11.29 1
1010.67 11.26 11.91 12.65 13.63 1
121.55042.25 2.38 2.52 2.67 3.05 1
33.31 3.49 3.69 3.92 4.47 1
44.36 4.60 4.86 5.16 5.89 1
55.41 5.71 6.04 6.41 7.32 1
66.46 6.82 7.21 7.66 8.74 1
88.57 9.04 9.56 10.15 11.18 1
1010.67 11.26 11.91 12.65 13.52 1
1212.77 13.48 14.26 15.01 15.85 1
1616.98 17.92 18.93 19.43 20.53 1

Model Number
VAC-PEM2LB
Flute Diameter DLength Under NeckFlute Length ℓOverall Length LShank Diameter dActual Effective Length Depends on Work Inclination AngleFigure
0.5°1.5°
1.261.85046.46 6.82 7.21 7.66 8.73 1
88.57 9.04 9.56 10.15 11.06 1
1010.67 11.26 11.91 12.65 13.40 1
1212.77 13.48 14.26 14.90 15.74 1
1.542.35044.36 4.60 4.86 5.16 5.89 1
66.46 6.82 7.21 7.66 8.56 1
88.57 9.04 9.56 10.15 10.89 1
1010.67 11.26 11.91 12.53 13.23 1
1212.77 13.48 14.26 14.74 15.57 1
1414.88 15.70 16.51 16.95 17.90 1
1616.98 17.92 18.67 19.16 20.24 1
2635046.46 6.82 7.21 7.66 8.27 1
88.57 9.04 9.56 10.04 10.60 1
1010.67 11.26 11.91 12.25 12.94 1
1212.77 13.48 14.09 14.47 15.28 1
1414.88 15.70 16.25 16.68 17.61 1
1616.98 17.92 18.40 18.89 19.95 1
2021.19 22.14 22.71 23.31 24.62 1
307031.71 32.64 33.49 34.38 36.31 1
384.55068.86 9.35 9.89 10.51 11.40 1
1010.97 11.57 12.24 13.00 13.73 1
1213.07 13.79 14.59 15.22 16.07 1
146015.18 16.01 16.94 17.43 18.41 1
1617.28 18.23 19.13 19.64 20.74 1
2021.49 22.67 23.44 24.07 25.42 1
266527.80 29.15 29.91 30.70 32.43 1
412650613.07 13.79 14.29 14.67 15.50 1
166017.28 18.13 18.60 19.10 20.17 1
2021.49 22.34 22.91 23.52 24.84 1
266527.80 28.64 29.38 30.16 31.85 1
307032.01 32.84 33.69 34.58 36.52 1
615960615.66 16.05 16.46 16.90 17.85 2
2020.78 21.30 21.85 22.43 23.69 2
307031.02 31.81 32.63 33.49 35.37 2
329033.07 33.91 34.78 35.71 37.71 2
8251270826.19 26.85 27.54 28.27 29.86 2
308031.31 32.10 32.93 33.80 35.70 2
4210043.61 44.70 45.86 47.08 49.72 2
103015751031.31 32.10 32.93 33.80 35.70 2
358036.43 37.35 38.32 39.33 41.54 2
4510046.68 47.85 49.09 50.39 53.22 2
123520801236.43 37.35 38.32 39.33 41.54 2
409041.56 42.60 43.70 44.86 47.38 2
5011051.80 53.11 54.48 55.93 59.06 2

Example


The ideal length under neck can be selected for workpiece machining in deep areas
We now newly stock blade diameters of 8 mm or more
[ ! ]The electrical conductivity is minimal. 

VAC Series Carbide 2-Flute Long Neck Square End Mill:Related Image 
[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.
 

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 2 Model Long Neck Square
Processing Applications Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting / Countersunk
  • The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)