(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Servo FlexSFH (SFH-220S)

Servo FlexSFH SFH-220S

Large type metal plate spring coupling.

(i)Caution

  • Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
    There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

SFH-220S

Structure and material of SFH model

Structural drawing of SFH S

Structural drawing of SFH S

Structural drawing of SFH G

Structural drawing of SFH G

Structural drawing of SFH S-□K-□K

Structural drawing of SFH S-□K-□K

Structural drawing of SFH G-□K-□K

Structural drawing of SFH G-□K-□K

Drawing and dimensions of SFH S TYPE

Drawing and dimensions of SFH-□S

Drawing of SFH-□S

Drawing of SFH-□S

(Unit: mm)

Modeld1, d2DNLLFSFKM
Pilot holeMinimumMaximum
SFH-150S20227015210410145115946-M8 × 36
SFH-170S252880178118124551461086-M10 × 45
SFH-190S3032851901261456515101166-M12 × 54
SFH-210S353890210130165751581246-M16 × 60
SFH-220S45481002251442009020-21326-M16 × 60
SFH-260S505511526216622310023111506-M20 × 80
  • * The pilot hole is a drilled hole. For hole machining, please refer to the standard hole drilling standards.
  • * The nominal of the reamer bolt M is the quantity - the nominal thread size × the nominal length.

Drawing and dimensions of SFH-□S-□K-□K

Drawing of SFH-□S-□K-□K

Drawing of SFH-□S-□K-□K

(Unit: mm)

ModelDLd1, d2N1·N2LFSCKMM1M2
SFH-150S15215738·40·42·45·5010865118946-M8 × 366-M8 × 603-M8
55·56·60·65·70128
SFH-170S17816038·40·42·45·50108651481086-M10 × 456-M8 × 603-M8
55·56·60·65·70128
75·80148
SFH-190S19017538·40·42·45·501087015101166-M12 × 546-M10 × 653-M10
55·56·60·65·70128
75·80·85148
SFH-210S21018138·40·42·45·501087315101246-M16 × 606-M10 × 653-M10
55·56·60·65·70128
75·80·85·90148
  • * The nominal of each bolt and tap is the quantity - the nominal thread size × the nominal length, and the quantity of the pressure bolt M1 and the removal screw hole M2 is the quantity of the flange on one side.

Drawing and dimensions of SFH G TYPE

Drawing and dimensions of SFH-□G

Drawing of SFH-□S-□K-□K

Drawing of SFH-□S-□K-□K

(Unit: mm)

Modeld1, d2DNLLFLSSFKM
Pilot holeMinimumMaximum
SFH-150G20227015210418245701159412-M8 × 36
SFH-170G252880178118218558014610812-M10 × 45
SFH-190G30328519012626065100151011612-M12 × 54
SFH-210G3538902101302907511015812412-M16 × 60
SFH-220G45481002251443359011520-213212-M16 × 60
SFH-260G5055115262166391100145231115012-M20 × 80
  • * The pilot hole is a drilled hole. For hole machining, please refer to the standard hole drilling standards.
  • * The nominal of the reamer bolt M is the quantity - the nominal thread size × the nominal length.

Drawing and dimensions of SFH-□G-□K-□K

Drawing of SFH-□G-□K-□K

Drawing of SFH-□G-□K-□K

(Unit: mm)

ModelDLd1, d2N1·N2LFLSSCKMM1M2
SFH-150G15223838·40·42·45·5010865701189412-M8 × 366-M8 × 603-M8
55·56·60·65·70128
SFH-170G17825438·40·42·45·50108658014810812-M10 × 456-M8 × 603-M8
55·56·60·65·70128
75·80148
SFH-190G19029038·40·42·45·5010870100151011612-M12 × 546-M10 × 653-M10
55·56·60·65·70128
75·80·85148
SFH-210G21030638·40·42·45·5010873110151012412-M16 × 606-M10 × 653-M10
55·56·60·65·70128
75·80·85·90148
  • * The nominal of each bolt and tap is the quantity - the nominal thread size × the nominal length, and the quantity of the pressure bolt M1 and the removal screw hole M2 is the quantity of the flange on one side.
Part Number
SFH-220S
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSO.D.
(Ø)
Full Length
(mm)
Allowable Torque Range
(N•m)
Allowable Misalignment Max. Rotational Speed Range
(r/min)
Allowable Torque
(N•m)
Allowable Angular Misalignment
(deg)
Allowable Lateral Misalignment
(mm)
Allowable Lateral Misalignment Range
(mm)
Maximum Rotation Speed
(r/min)
Allowable Axial Clearance (±)
(mm)
Moment of Inertia
(kg・m2)
Allowable Angular Misalignment Detail
(deg)
1 Piece(s) 17 Day(s) or more 102252005000~Less than 10000Angular Misalignment / Axial Misalignment2001~400050001--40000.6101.70 x 10-3-

Loading...

  1. 1

Basic Information

Type Type of Flat Springs Application Servo Motor Features High torsional rigidity / High Torque / High accuracy / High durability / Backlash 0 / Low Inertia Moment / Shaft hole Unfinished
Body Material Steel Product Category Coupling body Disc Material Stainless Steel
Operating Temperature Range(°C) -30::120

Frequently asked question (FAQ)

Question: Is it possible to transmit sufficient torque by using clamp method for fastening to the shaft?
Answer: As our torque transmission tests use an adequate safety coefficient, the fastened part will not slip due to the fastening method at the allowable torque in the catalog. Key grooving of the clamp hub is available; please refer to the key groove modification options as you desired.
Question: Noise and vibration were generated while using the metal sheet spring coupling. What countermeasures are available?
Answer: For servo motors, noise and vibration can be suppressed by setting a mechanical resonance control filter in the control system to the fixed frequency. For stepper motors, shift the operating RPM or absorb/control vibration with a step flex coupling with high damping effects.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)