(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Tube Cutter

Tube Cutter

Tubes can be cut to the desired length with the built-in measure.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

TC-21

Tube Cutter Specifications

Tube Cutter TC-21: related image

Tube Cutter examples of use

Tube Cutter TC-21: related image

Built-in measuring tape
Measuring tape length: 1 m

Tube Cutter TC-21: related image

Tube Cutter structural drawing

How To Replace The V-Shaped Blade

Tube Cutter TC-21: related image
  1. 1. With the cutter open, loosen the retaining screws (2 locations).
  2. 2. Grasp the hexagon socket of the V-shaped blade and remove the blade from the main body.
  3. 3. Change the position of the V-shaped blade by rotating it 180°.
  4. 4. Grasp the hexagon socket of the V-shaped blade and install the blade in the main body.
  5. 5. Tighten the retaining screws until the blade no longer wobbles (tightening torque: 0.2 to 0.24 N·m)
Part Number
TC-21
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHS
1 Piece(s) Same day 10

Loading...

  1. 1

Basic Information

Type Related Components Types of Related components Tube Cutter

Please check the type/dimensions/specifications of the part TC-21 in the Tube Cutter series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)