(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Shut-off Valve, Hand Valve, Straight B

Shut-off Valve, Hand Valve, Straight B

Click this image to zoom it.

Move the mouse over the image to zoom

  • On Sale Till 31/03/2024

[Features]
·Capable of opening and closing air pressure inlet to equipment
·3-direction valve type and 2-direction valve type are available
·The 3-direction valve type exhausts the residual pressure on the output side when closed
·Selectable from 4 types according to applications

(i)Caution

  • The product images are representative only. See the product standards for details.

PDF

Japanese Only

Drawing

Drawing of Shutoff Valve, Hand Valve, Straight B

Product Specifications

Product Specifications

Operating fluidAir
Maximum operating pressure0.9 MPa
Operating vacuum pressure-100 kPa
Operating temperature range0 to +60°C (no freezing)

Standard table

ModelTube
Outer Diameter
⌀D
RAE1E2L⌀P1⌀P2Tube
End
C
B1B2Width across flats
H
F1F2Effective
Cross-sectional area
(mm^2)
Weight
(g)
HV01-6- (3)(4)6R1/881740.555.912.516.51733.526.4141888.334
HV02-6- (3)(4)R1/41156.836.58.540
HV03-6- (3)(4)R3/81258.338.3178.253
HV01-8- (3)(4)8R1/881740.557.21516.518.133.527.7141888.935
HV02-8- (3)(4)R1/41158.236.541
HV03-8- (3)(4)R3/81259.738.31754
HV02-10- (3)(4)10R1/41121.74168.717.519.520.242.532.217241116.662
HV03-10- (3)(4)R3/81269.443.516.971
HV04-10- (3)(4)R1/21570.546.52116.593
HV02-12- (3)(4)12R1/41121.74171.42119.523.442.534.91724111766
HV03-12- (3)(4)R3/81272.143.517.174
HV04-12- (3)(4)R1/21573.246.52116.896
HV01-1/4- (3)(4)1/4R1/881740.555.912.516.51733.526.4141888.734
HV02-1/4- (3)(4)R1/41156.836.58.440
HV03-1/4- (3)(4)R3/81258.338.3178.553
HV01-5/16- (3)(4)5/16R1/881740.557.21516.518.133.527.7141888.935
HV02-5/16- (3)(4)R1/41158.236.541
HV03-5/16- (3)(4)R3/81259.738.31754
HV02-3/8- (3)(4)3/8R1/41121.74168.717.519.520.242.532.217241116.563
HV03-3/8- (3)(4)R3/81269.443.516.871
HV04-3/8- (3)(4)R1/21570.546.52116.693
  • * L dimension is a reference dimension after screw tightening.
  • * Please enter the symbol: "-2" in (3) of a model when the 2-directional valve is required, and leave it blank for the 3-directional valve.
    Please enter the symbol: W in (4) of a model for the external appearance color of light gray, and leave it blank for the standard color (resin body and collet: black, cap lever: blue).

Usage examples

How to operate the cap lever

1. When opening the valve

Cap lever operation method 1 for Shutoff Valve, Hand Valve, Straight B

Turn the cap lever 90° clockwise until it stops to cause air to flow.

1. When closing the valve

Cap lever operation method 2 for Shutoff Valve, Hand Valve, Straight B

Turn the cap lever 90° counterclockwise until it stops to stop the air flow. Also, in the case of a 3-direction valve, the residual pressure on the OUT side is exhausted from between the main body and the cap lever when the cap lever is turned.

How To Attach And Detach The Connecting Part

1. How to attach/detach the tube

Attachment and detachment method 1 for Cap lever for Shutoff Valve, Hand Valve, Straight B

(1) Installation of tube

By simply inserting a tube until the tube stop, the Hand Valve (Closed Valve With Quick-Connect Fitting) fixes it with its lock claws, and the elastic sleeve seals the outer circumference of the tube.
When installing, refer to the precautions "6. Precautions for installing the tube" in the digital catalog.

Attachment and detachment method 2 for Cap lever for Shutoff Valve, Hand Valve, Straight B

(2) Removing the tube

When removing the tube, the lock claw opens by pushing the release ring, and the tube can be pulled out.
Please be sure to turn off the air before removing.

2. Securing method

Attachment and detachment method 3 for Cap lever for Shutoff Valve, Hand Valve, Straight B

(1) How to tighten using the outer sides of the hexagonal part

For straight A, B and nipple types of hand valves, tighten using the outer sides of the hexagonal part with a wrench.
When attaching, refer to the tightening torque in the table of common precautions for switching "2. Precautions for mounting the main body."

Attachment and detachment method 4 for Cap lever for Shutoff Valve, Hand Valve, Straight B

(2) How to fix the main body

To fix the union straight type of the hand valve, tighten M4 screws through the fixing hole provided in the resin body.
(Refer to the drawing for the pitch of fixing holes.)

Cautions/prohibitions

Warning

1. Selection of pneumatic equipment

(1) The selection of pneumatic equipment should be decided by a person who has sufficient knowledge and experience, such as a pneumatic system designer or a person who decides specifications.

(2) Since the conditions used are diverse, before determining the compatibility with a system, ensure that a person with sufficient knowledge and experience, such as a pneumatic system designer or a person who decides the specifications, perform analyses and tests as necessary. In addition, it is the responsibility of the person who determines the compatibility with the system to guarantee the intended performance and safety of the system. Also after that, please review all the details of the specifications on the latest product catalogs and documents, and consider the situation regarding the possibility of equipment failure before configure a system.

2. A person with sufficient knowledge and experience should handle the pneumatic equipment.

(1) Compressed air is dangerous if mishandled. Ensure that a person with sufficient knowledge and experience performs assembly, operation, maintenance, etc., of machines and devices using pneumatic equipment.

3. Please do not handle machines/devices or remove devices until safety is confirmed.

(1) Before inspecting or servicing machines/devices, make sure that workpiece fall prevention measures are taken and runaway prevention devices are installed.

(2) When removing equipment, make sure that the above safety measures are taken, shut off the supply of compressed air and the power supply of the corresponding equipment, and exhaust the compressed air from the system.

(3) When restarting a machine/device, make sure that measures are taken to prevent popping out and be careful.

  • * Please note that cautions and prohibited items are subject to change without notice.
Part Number
HV01-1/4
HV01-1/4-2
HV01-1/4-2W
HV01-5/16
HV01-5/16-2
HV01-6
HV01-6-2
HV01-6-2W
HV01-8
HV01-8-2
HV01-8-2W
HV02-1/4
HV02-1/4-2
HV02-1/4W
HV02-3/8
HV02-3/8-2
HV02-3/8W
HV02-5/16
HV02-5/16-2
HV02-5/16-2W
HV02-6
HV02-6-2
HV02-6-2W
HV02-8
HV02-8-2
HV02-8-2W
HV02-10
HV02-10-2
HV02-10-2W
HV02-12
HV02-12-2
HV02-12-2W
HV02-12W
HV03-1/4
HV03-1/4-2
HV03-3/8
HV03-3/8-2
HV03-5/16
HV03-5/16-2
HV03-6
HV03-6-2
HV03-6-2W
HV03-8
HV03-8-2
HV03-8-2W
HV03-10
HV03-10-2
HV03-10-2W
HV03-10W
HV03-12
HV03-12-2
HV03-12-2W
HV04-3/8
HV04-3/8-2
HV04-10
HV04-10-2
HV04-10-2W
HV04-10W
HV04-12
HV04-12-2
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSNumber of Ports Connecting Tube Diameter Plumbing Thread Nominal Effective Sectional Area
(mm2)
Effective Sectional Area【classification】
(mm2)
Appearance Color
1 Piece(s) 14 Day(s) or more -3-Port1/41/88.7~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port1/41/88.7~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port1/41/88.7~10Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Port5/161/88.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port5/161/88.9~10Standard Color Type
1 Piece(s) 18 Day(s) or more 103-Portφ61/88.3~10Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ61/88.3~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ61/88.3~10Light Gray Specification
1 Piece(s) Same day -3-Portφ81/88.9~10Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ81/88.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ81/88.9~10Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Port1/41/48.4~10Standard Color Type
1 Piece(s) Same day 102-Port1/41/48.4~10Standard Color Type
1 Piece(s) 14 Day(s) or more -3-Port1/41/48.4~10Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Port3/81/416.5~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port3/81/416.5~20Standard Color Type
1 Piece(s) 14 Day(s) or more -3-Port3/81/416.5~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Port5/161/48.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port5/161/48.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port5/161/48.9~10Light Gray Specification
1 Piece(s) 8 Day(s) or more 103-Portφ61/48.5~10Standard Color Type
1 Piece(s) 22 Day(s) or more 102-Portφ61/48.5~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ61/48.5~10Light Gray Specification
1 Piece(s) Same day 103-Portφ81/48.9~10Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ81/48.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ81/48.9~10Light Gray Specification
1 Piece(s) Same day 103-Portφ101/416.6~20Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ101/416.6~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ101/416.6~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Portφ121/417~20Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ121/417~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ121/417~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Portφ121/417~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Port1/43/88.5~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port1/43/88.5~10Standard Color Type
1 Piece(s) 14 Day(s) or more -3-Port3/83/816.8~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port3/83/816.8~20Standard Color Type
1 Piece(s) 14 Day(s) or more -3-Port5/163/88.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port5/163/88.9~10Standard Color Type
1 Piece(s) 13 Day(s) or more -3-Portφ63/88.2~10Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ63/88.2~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ63/88.2~10Light Gray Specification
1 Piece(s) Same day 103-Portφ83/88.9~10Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ83/88.9~10Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ83/88.9~10Light Gray Specification
1 Piece(s) 8 Day(s) or more 103-Portφ103/816.9~20Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ103/816.9~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ103/816.9~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Portφ103/816.9~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Portφ123/817.1~20Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ123/817.1~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ123/817.1~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Port3/81/216.6~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Port3/81/216.6~20Standard Color Type
1 Piece(s) 8 Day(s) or more 103-Portφ101/216.5~20Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ101/216.5~20Standard Color Type
1 Piece(s) 14 Day(s) or more -2-Portφ101/216.5~20Light Gray Specification
1 Piece(s) 14 Day(s) or more -3-Portφ101/216.5~20Light Gray Specification
1 Piece(s) 19 Day(s) or more -3-Portφ121/216.8~20Standard Color Type
1 Piece(s) 8 Day(s) or more 102-Portφ121/216.8~20Standard Color Type

Loading...

Basic Information

Shape One-Touch Coupling Type Number of Switching Positions Normally Close Operation Method Knob
Pipe Port Type R How to Mount Side surface Operation Status Retention Holding

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)