(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Corrosion Resistant SUS316 Tighten Fitting Branch Tee

Corrosion Resistant SUS316 Tighten Fitting Branch Tee

All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

PDF

Japanese Only

Drawing

Units: mm

Drawing

Product Specifications

Specifications

Operating fluidAir, water, etc. (*)
Maximum operating pressureAccording to the maximum operating pressure of the tube
Operating vacuum pressure-100 kPa
Operating temperature rangeDepends on the tube specification range (no freezing)
  • * Regarding chemicals, mixed gas, etc., the conformity of specifications may differ depending on the usage conditions, so please check before using.

Compatible size

Tube sizeMetric size
Symbol0420042506400806
Tube outer diameter (mm)⌀4 (outer diameter 4 mm)⌀6 (outer diameter 6 mm)⌀8 (outer diameter 8 mm)
Tube inner diameter (mm)⌀2 (inner diameter 2 mm)⌀2.5 (inner diameter 2.5 mm)⌀4 (inner diameter 4 mm)⌀6 (inner diameter 6 mm)
Designation For Tightening Nut Only468
Designation For Conical Spring Washer Only121416
Tube sizeMetric size
Symbol10751080129012101613
Tube outer diameter (mm)⌀10 (outer diameter 10 mm)⌀12 (outer diameter: 12 mm)⌀16 (outer diameter 16 mm)
Tube inner diameter (mm)⌀7.5 (inner diameter 7.5 mm)⌀8 (inner diameter 8 mm)⌀9 (inner diameter 9 mm)⌀10 (inner diameter 10 mm)⌀13 (inner diameter 13 mm)
Designation For Tightening Nut Only101216
Designation For Conical Spring Washer Only182024
  • * If you only need the tightening nut, enter the symbol of tightening nut only.
  • * If you need a disc spring washer of bulkhead type, please enter the symbol for the disc spring washer only. For the bulkhead socket type, select it from the thread size.
Thread sizeTapered pipe thread
Symbol01020304
Male thread sizeR1/8R1/4R3/8R1/2
Female thread sizeRc1/8Rc1/4Rc3/8Rc1/2
Designation For Conical Spring Washer Only14182227
  • * If you need a disc spring washer of bulkhead type, please enter the symbol for the disc spring washer only.

Structural drawing (elbow type: for NSL)

Structural drawing
  • * Since it can be used in special environments such as those related to chemicals/foods, the thread section has no thread sealant in consideration of the influence of sealant.

Standard table

Units: mm

Part numberTube outer diameter × inner diameter
⌀D
RABL1L2E1(E2)E3CWidth across flats
H1
Width across flats
H2
Weight
(g)
Orifice diameter
(ømm)
NSD0420-01□4 × 2R1/884238172127.911.55.51012361.3
NSD0420-02□R1/41144162230.11445
NSD0425-01□4 × 2.5R1/884238172127.911.55.51012361.4
NSD0425-02□R1/41144162230.11445
NSD0640-01□6 × 4R1/884238172127.911.561212393
NSD0640-02□R1/41144162230.11448
NSD0640-03□R3/8125851.722.7294019113
NSD0860-01□8 × 6R1/885046212534.813.571417805
NSD0860-02□R1/411441977
NSD0860-03□R3/8125851.722.7294019112
NSD1075-02□10 × 7.5R1/411585223294016.5917191216
NSD1075-03□R3/81251.722.7120
NSD1075-04□R1/2156253.822.83144.323164
NSD1080-02□10 × 8R1/411585223294016.5917191206.5
NSD1080-03□R3/81251.722.7119
NSD1080-04□R1/2156253.822.83144.323162
NSD1290-02□12 × 9R1/411585223294016.5919191267.5
NSD1290-03□R3/81251.722.7127
NSD1290-04□R1/2156253.822.83144.323170
NSD1210-02□12 × 10R1/411585223294016.5919191248.5
NSD1210-03□R3/81251.722.7125
NSD1210-04□R1/2156253.822.83144.323167
NSD1613-03□16 × 13R3/8126457.725.73245.3189.5232317211.5
NSD1613-04□R1/21555.823.8174

Selection support information

Part number display example

Model display example

[(4) Thread section seal specifications]

  • Blank: Standard specifications (no sealant or sealing tape)
  • -TP: Sealing tape specifications (wrap sealing tape around the thread section)
Part Number
NSD0420-01
NSD0420-02
NSD0425-01
NSD0425-02
NSD0640-01
NSD0640-02
NSD0640-03
NSD0860-01
NSD0860-02
NSD0860-03
NSD1075-02
NSD1075-03
NSD1075-04
NSD1075-04-TP
NSD1080-02
NSD1080-03
NSD1080-04
NSD1210-02
NSD1210-03
NSD1210-04
NSD1290-02
NSD1290-03
NSD1290-04
NSD1613-03
NSD1613-04
Part NumberMinimum order quantityVolume DiscountDays to ShipNominal of Thread Tube Outer Dia.
(mm)
Tube Inner Dia.
(mm)
Thread Part Seal Specification
1 Piece(s) 13 Day(s) or more 1/842Standard Specifications
1 Piece(s) 13 Day(s) or more 1/442Standard Specifications
1 Piece(s) 13 Day(s) or more 1/842.5Standard Specifications
1 Piece(s) 13 Day(s) or more 1/442.5Standard Specifications
1 Piece(s) 8 Day(s) or more 1/864Standard Specifications
1 Piece(s) 8 Day(s) or more 1/464Standard Specifications
1 Piece(s) 13 Day(s) or more 3/864Standard Specifications
1 Piece(s) 13 Day(s) or more 1/886Standard Specifications
1 Piece(s) 15 Day(s) or more 1/486Standard Specifications
1 Piece(s) 13 Day(s) or more 3/886Standard Specifications
1 Piece(s) 13 Day(s) or more 1/4107.5Standard Specifications
1 Piece(s) 13 Day(s) or more 3/8107.5Standard Specifications
1 Piece(s) 13 Day(s) or more 1/2107.5Standard Specifications
1 Piece(s) 13 Day(s) or more --7.5Sealing Tape Specifications
1 Piece(s) 13 Day(s) or more 1/4108Standard Specifications
1 Piece(s) 13 Day(s) or more 3/8108Standard Specifications
1 Piece(s) 13 Day(s) or more 1/2108Standard Specifications
1 Piece(s) 13 Day(s) or more 1/41210Standard Specifications
1 Piece(s) 13 Day(s) or more 3/81210Standard Specifications
1 Piece(s) 13 Day(s) or more 1/21210Standard Specifications
1 Piece(s) 13 Day(s) or more 1/4129Standard Specifications
1 Piece(s) 13 Day(s) or more 3/8129Standard Specifications
1 Piece(s) 15 Day(s) or more 1/2129Standard Specifications
1 Piece(s) 13 Day(s) or more 3/81613Standard Specifications
1 Piece(s) 13 Day(s) or more 1/21613Standard Specifications

Loading...

  1. 1

Basic Information

Connection Types Screw⇔Tube Branch Connection Screw-to-Tube Multipoint Connection Shape T Branch Material SUS316
Surface Treatment No Screw Types R

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)