(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Standard Type, Throttle Valve, Elbow (JNC1/4-M5)

Standard Type, Throttle Valve, Elbow JNC1/4-M5

Click this image to zoom it.

Move the mouse over the image to zoom

  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • Standard Type, Throttle Valve, Elbow JNC1/4-M5
  • On Sale Till 31/03/2024

Controls pneumatic equipment speed and air pressure signals.

  • STOCK

PDF

Japanese Only

Part Number

Configured Part Number is shown.

JNC1/4-M5

Specifications Of Standard Type Throttle Valve - Elbow

Appearance of Standard Type Throttle Valve - Elbow

Appearance of Standard Type Throttle Valve - Elbow

Dimensional drawing of Standard Type Throttle Valve - Elbow

Dimensional drawing of Standard Type Throttle Valve - Elbow

Release Ring Mini Type

Release Ring Mini Type

Release Ring Mini Type

Release Ring Mini Type

FormatTube Outer Diameter
øD
RABL1L2øp1øP2Tube End
C
EHex
H
X
(øX)
YMass
(g)
Max.Min.Max.Min.
JNC4-M5□4M5 × 0.82.9 [3.2]29.72726.8 [26.5]24.1 [23.8]6.7 [6.4]89.81115.489.87.87.9
JNC4-01□R1/8841.535.137.53110.714.417.71018
JNC6-M5□6M5 × 0.82.9 [3.2]29.72726.8 [26.5]24.1 [23.8]7.5 [7.2]10.59.811.617.5811.89.88.6
JNC6-01□R1/8841.535.137.531.110.714.418.31019
JNC6-02□R1/411.149.242.143.13611.918.420.21437
JNC8-01□8R1/8841.535.137.531.111.914.414.418.126.91013.8-22
JNC8-02□R1/411.149.242.143.13613.218.428.41440
JNC8-03□R3/813.255.547.349.140.915.42228.91971
JNC10-02□10R1/411.149.242.143.13614.817.618.420.230.91416.8-44
JNC10-03□R3/813.255.547.349.140.916.72231.21974
JNC12-03□12R3/813.255.547.349.140.918.4212223.436.91919.8-78
JNC12-04□R1/21660.252.65244.419.72836.424119
JNC1/4-M5□1/4M5 × 0.82.9 [3.2]29.72726.8 [26.5]24.1 [23.8]8.4 [8.1]12.49.81724811.8-11
JNC1/4-01□R1/8841.535.137.531.110.914.423.51020
JNC1/4-02□R1/411.149.242.143.13612.218.425.51439
JNC5/16-01□5/16R1/8841.535.137.531.111.914.414.418.126.91013.8-22
JNC5/16-02□R1/411.149.242.143.13613.218.428.41440
JNC5/16-03□R3/813.255.547.349.140.915.42228.91971
JNC3/8-02□3/8R1/411.149.242.143.13614.817.618.420.230.91416.8-44
JNC3/8-03□R3/813.255.547.349.140.916.72231.21974

Unit: mm
*1 If you do not want the black exterior color and the normal packaging, replace the □ at the end of the order format with the desired selection.
Exterior color: light gray = W, Packaging specification: clean room specification = -C,
Exterior color: light gray and packaging specification: clean room specification = W-C
*2 Taper thread type L1 and L2 dimensions are reference dimensions after tightening.
* 3 The value in square brackets ([]) is the clean room packaging specification value.

Speed ​​adjustment methods

Illustration of 1. Driving equipment speed adjustment (1)

Illustration of 1. Driving equipment speed adjustment (1)

Illustration of 1. Driving equipment speed adjustment (2)

Illustration of 1. Driving equipment speed adjustment (2)

  1. 1.To increase the speed of the pneumatic equipment, begin turning the needle of the throttle valve counterclockwise from the fully open position. When it reaches the desired speed, tighten the lock nut so that the speed setting does not deviate.
  2. 2.If you turn the needle of the throttle valve too far (if the speed gets too fast), turn it clockwise to slow it down. When it reaches the desired speed, tighten the lock nut so that the speed setting does not deviate.

How To Attach And Detach The Connecting Part

1. How to attach and detach the tube (1)

1. How to attach and detach the tube (1)

1. How to attach and detach the tube (2)

1. How to attach and detach the tube (2)

2. How to tighten the screw (1)

2. How to tighten the screw (1)

1. How to attach and detach the tube
(1) Attaching the tube
The throttle valve (a needle throttle with a one-touch fitting) allows the tube to be secured with a lock claw by simply inserting the tube all the way to the end, while an elastic sleeve seals the outside of the tube.
(2) Detaching the tube
To detach the tube, push the release ring to open the lock claw and pull out the tube. Be sure to turn off the air before detaching the tube.
2. How to tighten the screw
(1) Tightening the screw
Tighten the screw by tightening the outer hexagon with a wrench.

Part Number
JNC1/4-M5
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSNominal Diameter of Tube D Nominal of Thread Release Ring Color Resin Body Color
1 Piece(s) 14 Day(s) or more -6.35M5×0.8BlackBlack

Loading...

  1. 1

Basic Information

Type Throttle Valves Shape Elbow Control Direction Meter Out / In
Joint Type Screw, Tube Connection Material PBT Environment, Applications Standard
Thread Material Brass Knob Type Standard Lock Nut Type Knurling
Operating Temp. Range(°C) 0::60 Operating Pressure Range(MPa) 0::0.9 Package Specifications Standard
Seal Rubber Material NBR Applicable Fluids Air

Please check the type/dimensions/specifications of the part JNC1/4-M5 in the Standard Type, Throttle Valve, Elbow series.

Products like this...

Part Number
JNC1/4-01
JNC1/4-02
JNC10-02
JNC10-02W
JNC10-03
JNC12-03
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSNominal Diameter of Tube D Nominal of Thread Release Ring Color Resin Body Color
1 Piece(s) 13 Day(s) or more -6.35R1/8BlackBlack
1 Piece(s) 13 Day(s) or more -6.35R1/4BlackBlack
1 Piece(s) 1 Day(s) 1010R1/4BlackBlack
1 Piece(s) 15 Day(s) or more -10R1/4Light GrayLight Gray
1 Piece(s) Same day 1010R3/8BlackBlack
1 Piece(s) 12 Day(s) or more 1012R3/8BlackBlack

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)