• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

Tube Fitting Universal Elbow with Hexagonal Hole for Standard Pipe

Tube Fitting Universal Elbow with Hexagonal Hole for Standard Pipe

Many types of one-touch fittings for standard piping.

[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported

PDF

Japanese Only

Rich Variety

POL appearance

POL appearance

POL dimensional drawing

POL dimensional drawing

POL dimensional drawing

POL dimensional drawing

Specifications

Usable FluidsAir, water (see conditions*)
Maximum Operating Pressure1.0 MPa
Operating Vacuum Pressure-100 kPa
Operating Temperature Range0 to 60°C (no freezing)
  • *When the specified fluid is water, the following conditions must be observed.
  1. 1.When using water, make sure the surge pressure stays below the maximum operating pressure.
  2. 2.Tap water of the standard equivalent to the water supply in Japan can be used. Please inquire if you want to use other kinds of water.
  3. 3.Be sure to use an insert ring when using water.

Tube Size

Millimeter Size (mm)ø4, ø6, ø8, ø10, ø12, ø16
Inch Sizeø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8

Thread Size

Metric Male ThreadM5 × 0.8, M6 × 1
Taper Pipe Male ThreadR1/8, R1/4, R3/8, R1/2
Metric Female ThreadM5 × 0.8
Taper Pipe Female ThreadRc1/8, Rc1/4, Rc3/8, Rc1/2
FormatTube Outer Diameter
øD
RABL1L2øP1øP2Tube End
C
EHex
H
Orifice Diameter
(ømm)
Mass
(g)
POL4-M5 (4)4M5 × 0.83 [3.2]17.514.5 [14.3]7.5 [7.3]101014.919.841.86.3
POL6-01 (4)6R1/88242011.51314.31723.75415
POL6-02 (4)R1/411272112.522
POL8-01 (4)8R1/882723121417.918.126.785.622
POL8-02 (4)R1/41130241328
POL8-03 (4)R3/8123124.713.737
POL10-02 (4)10R1/4113428151821.320.730.7107.540
POL10-03 (4)R3/8123528.715.749
POL12-03 (4)12R3/8123932.717.72126.323.436.4129.168
POL12-04 (4)R1/2154233.818.885
After installation, you can change the take-off angle of the resin body.

After installation, you can change the take-off angle of the resin body.

Allows centralized piping. The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.

Allows centralized piping.
The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.

We offer a clean washing specification suitable for various particle- and oil-averse production processes. (Optional setting for clean room packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.

We offer a clean washing specification suitable for various particle- and oil-averse production processes. (Optional setting for clean room packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.

High performance and high quality

The lock claw evenly grips the circumference of the tube. Even after many years, tubes still attach and detach like new.
Unique elastic sleeve design shuts out air leaks.

Industry-leading range of variations

A wide assortment of different-diameter sizes is available. One fitting can be used where traditionally two fittings were required.
By reducing the number of fittings used, you can reduce costs and space.

We offer a clean room packaging specification, which is suited to piping in a clean environment. (option)

The product uses fluorochemical grease and is cleaned with clean air before being packaged in a clean room (equivalent to ISO Class 6).

The seal part uses a unique elastic sleeve that shuts out air leaks.

The seal part uses a unique elastic sleeve that shuts out air leaks.

When release ring has been pushed

When release ring has been pushed

Push the release ring to collapse and hide the lock claw

Normal state

Normal state

The lock claw evenly grips the circumference of the tube. Removal and refitting feels almost the same as the first insertion.
When you release your finger from the release ring, the fine ridges of the lock claw come into view

Part Number
POL4-M5
POL4-M5W
POL6-01
POL6-01W
POL6-02
POL6-02W
POL8-01
POL8-01W
POL8-02
POL8-02W
POL8-03
POL8-03W
POL10-02
POL10-02W
POL10-03
POL10-03W
POL12-03
POL12-03W
POL12-04
POL12-04W
Part NumberVolume DiscountDays to ShipOperating Temperature
(°C)
Applicable Tube O.D.1
(φ)
Types of connection screw 1 Nominal of Thread 1 Release Ring Color Resin Body Color
Same day 0~604MM5×0.8BlackBlack
18 Day(s) or more 0~604MM5×0.8Light GrayLight Gray
Same day 0~606R1/8BlackBlack
18 Day(s) or more 0~606R1/8Light GrayLight Gray
Same day 0~606R1/4BlackBlack
18 Day(s) or more 0~606R1/4Light GrayLight Gray
Same day 0~608R1/8BlackBlack
18 Day(s) or more 0~608R1/8Light GrayLight Gray
2 Day(s) 0~608R1/4BlackBlack
18 Day(s) or more 0~608R1/4Light GrayLight Gray
Same day 0~608R3/8BlackBlack
18 Day(s) or more 0~608R3/8Light GrayLight Gray
Same day 0~6010R1/4BlackBlack
18 Day(s) or more 0~6010R1/4Light GrayLight Gray
Same day 0~6010R3/8BlackBlack
18 Day(s) or more 0~6010R3/8Light GrayLight Gray
Same day 0~6012R3/8BlackBlack
18 Day(s) or more 0~6012R3/8Light GrayLight Gray
Same day 0~6012R1/2BlackBlack
18 Day(s) or more 0~6012R1/2Light GrayLight Gray

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Screw Mount Direction Applicable Fluid Water / Air
Application Standard/Mini Screw Mounting, Direction Elbow Elbows Hex socket head cap universal elbow
Package Specifications Regular Packaging Specifications

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)