(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

For General Piping, Tube Fitting, Extended Fitting Bushing

For General Piping, Tube Fitting, Extended Fitting Bushing

Click this image to zoom it.

Move the mouse over the image to zoom

  • For General Piping, Tube Fitting, Extended Fitting Bushing
  • For General Piping, Tube Fitting, Extended Fitting Bushing
  • For General Piping, Tube Fitting, Extended Fitting Bushing
  • For General Piping, Tube Fitting, Extended Fitting Bushing
  • On Sale Till 31/03/2024

Many types of one-touch fittings for standard piping.

[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported

PDF

Japanese Only

One-Touch Fitting For General Pneumatic Piping

Plastic: PBT, Metal: Brass + Ni plating, Sealing rubber: NBR reduced ozone concentrations, non-grease/oil-free specification, clean room packaging specification, clean washing specification

Plastic: PBT, Metal: Brass + Ni plating, Sealing rubber: NBR
Reduced ozone concentrations, non-grease/oil-free specification, clean room packaging specification, clean washing specification

Extension Screw Adapter appearance

Extension Screw Adapter appearance

Extension Screw Adapter dimensional drawing (metric thread type)

Extension Screw Adapter dimensional drawing (metric thread type)

FormatRRcA1A2BLHex
H
Orifice Diameter
(ømm)
Mass
(g)
PFM5-M5M5 × 0.8M5 × 0.83 [3.2]519.516.5 [16.3]81.85.3
PFM5-M5L2320 [19.8]6.2
PFM5-01Rc1/8714.511.5 [11.3]1411
PF01-M5R1/8M5 × 0.886128104.25.7
PF01-01Rc1/8728.524.514618
PF01-02Rc1/49.521171719
PF01-03Rc3/810.522182128
PF02-M5R1/4M5 × 0.81161610144.216
PF02-01Rc1/8719134.617
PF02-02Rc1/49.5332717832
PF02-03Rc3/810.525192132
PF02-04Rc1/21330242444
PF03-01R3/8Rc1/812717.511.217625
PF03-02Rc1/49.522.516.2827
PF03-03Rc3/810.53730.7211053
PF03-04Rc1/2133124.72447
PF04-04R1/2Rc1/215134334.8241186

Unit: mm

Usable FluidsAir, water (see conditions*)
Maximum Operating Pressure1.0 MPa
Operating Vacuum Pressure-100 kPa
Operating Temperature Range0 to 60°C (no freezing)

Specifications

  • *When the fluid used is water, the following conditions must be observed.
  1. 1.When using water, make sure the surge pressure stays below the maximum operating pressure.
  2. 2.Tap water of the standard equivalent to the water supply in Japan can be used. Please inquire if you want to use other kinds of water.
  3. 3.Be sure to use an insert ring when using water.
Millimeter Size (mm)ø4, ø6, ø8, ø10, ø12, ø16
Inch Sizeø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8

Compatible sizes (tube sizes)

Metric Male ThreadM5 × 0.8, M6 × 1
Taper Pipe Male ThreadR1/8, R1/4, R3/8, R1/2
Metric Female ThreadM5 × 0.8
Taper Pipe Female ThreadRc1/8, Rc1/4, Rc3/8, Rc1/2

Compatible sizes (thread sizes)

High performance and high quality

High performance and high quality
The lock claw evenly grips the circumference of the tube. Even after many years, tubes still attach and detach like new. Unique elastic sleeve design shuts out air leaks.
Industry-leading range of variations
A wide assortment of different-diameter sizes is available. One fitting can be used where traditionally two fittings were required. By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.

Allows centralized piping

Allows centralized piping
The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.

A clean room packaging specification suitable for piping in a clean environment is available (optional)

We offer a clean room packaging specification (optional), which is suited to piping in a clean environment
The product uses fluorochemical grease and is cleaned with clean air before being packaged in a clean room (equivalent to ISO Class 6). We offer a clean washing specification suitable for various particle- and oil-averse production processes (optional setting for clean room packaging specification).
The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.

Part Number
PF01-01
PF01-02
PF01-03
PF01-M5
PF02-01
PF02-02
PF02-03
PF02-04
PF02-M5
PF03-01
PF03-02
PF03-03
PF03-04
PF04-04
PFM5-01
PFM5-M5
PFM5-M5L
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSScrew Types Nominal of Thread Types of Screw Small-Diameter Side Nominal of Thread Small-Diameter Side Full length B
(mm)
1 Piece(s) Same day 10R1/8Rc1/828.5
1 Piece(s) Same day 10R1/8Rc1/421
1 Piece(s) 8 Day(s) or more -R1/8Rc3/822
1 Piece(s) Same day -R1/8MM5×0.812
1 Piece(s) Same day 10R1/4Rc1/819
1 Piece(s) Same day 10R1/4Rc1/433
1 Piece(s) Same day 10R1/4Rc3/825
1 Piece(s) 8 Day(s) or more -R1/4Rc1/230
1 Piece(s) Same day 10R1/4MM5×0.816
1 Piece(s) 12 Day(s) -R3/8Rc1/817.5
1 Piece(s) Same day 10R3/8Rc1/422.5
1 Piece(s) Same day 10R3/8Rc3/837
1 Piece(s) Same day 10R3/8Rc1/231
1 Piece(s) Same day 10R1/2Rc1/243
1 Piece(s) Same day 10MM5×0.8Rc1/814.5
1 Piece(s) Same day 10MM5×0.8MM5×0.819.5
1 Piece(s) Same day 10MM5×0.8MM5×0.823

Loading...

  1. 1

Basic Information

Connection Types Screw⇔Screw Connection Screw <=> Screw Connection Shape Bushing Material Brass
Package Specifications Regular Packaging Specifications Ambient Temperature(℃) 0~60 Applicable Fluids Water, Air
Appearance Color Standard Specifications

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)