(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

For General Piping, Mini-Type Tube Fitting, Bulkhead Union (Part Numbers)

For General Piping, Mini-Type Tube Fitting, Bulkhead Union

Click this image to zoom it.

Move the mouse over the image to zoom

  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union
  • For General Piping, Mini-Type Tube Fitting, Bulkhead Union

[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and such.
· Light gray types, and clean room packaged types currently available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room.

  • STOCK

PDF

Japanese Only

Now 40% Smaller By Volume Compared To Standard Type

Appearance of Mini Type PM

Appearance of Mini Type PM

Dimensional drawing of Mini Type PM

Dimensional drawing of Mini Type PM

Dimensional drawing of Mini Type PM

Dimensional drawing of Mini Type PM

Specifications

Usable FluidsAir
Maximum Operating Pressure1.0 MPa
Operating Vacuum Pressure-100 kPa
Operating Temperature Range0 to 60°C (no freezing)

Tube Size

Millimeter Size (mm)ø1.8, ø2, ø3, ø4, ø6
Inch Sizeø1/8, ø5/32, ø1/4

Thread Size

Metric Male ThreadM3 × 0.5, M5 × 0.8, M6 × 1
Taper Pipe Male ThreadR1/8, R1/4, R3/8
Metric Female ThreadM3 × 0.5, M5 × 0.8
FormatTube Outer Diameter
øD
MBEAøPTube End
C
Hex
H
GX
(øX)
YEffective Cross-Sectional Area
(mm2)
Mass
(g)
PM180M1.8M6 × 0.7517.62.113.5-8.4824.8-11.5
PM2M2M6 × 0.7517.62.113.5-8.4824.8-12
PM3M3M8 × 0.7519.54.811.779.4102762.43.1
PM4M4M10 × 123.25.814.18.910.91237.8-3.76
PM6M6M12 × 1256.614.810.811.71449.8-10.59
PM1/8M1/8M10 × 123.25.814.18.910.91237.8-2.16.1
PM5/32M5/32M10 × 123.25.814.18.910.91237.8-3.76
PM1/4M1/4M12 × 124.66.414.810.811.41449.8-11.28.8

Unit: mm

Comparison between Mini and Standard

Comparison between Mini and Standard
Easy attachment and detachment of tubes despite ultra-compact size. The release ring features an oval shape.

Since its initial launch, the Mini has featured an easy-to-use oval-shaped release ring. The Standard features a circular release ring, while the Mini's is oval-shaped. This feature is intended to improve ease-of-use.

Since its initial launch, the Mini has featured an easy-to-use oval-shaped release ring.
The Standard features a circular release ring, while the Mini's is oval-shaped. This feature is intended to improve ease-of-use.

We offer one-touch fittings for ultra-thin tube piping. The ø1.8 (diameter 1.8 mm) and ø2 (diameter 2 mm) sizes are ideal for piping to small actuators, etc.

We offer one-touch fittings for ultra-thin tube piping.
The ø1.8 (diameter 1.8 mm) and ø2 (diameter 2 mm) sizes are ideal for piping to small actuators, etc.

Part Number
PM1/4M
PM1/8M
PM3M
PM3MW
PM4M
PM4MW
PM5/32M
PM6M
PM6MW
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSApplicable Tube O.D.1
(φ)
Release Ring Color Resin Body Color
10 Piece(s) 20 Day(s) or more -6.35WhiteBlack
10 Piece(s) 24 Day(s) or more -3.2WhiteBlack
1 Piece(s) 1 Day(s) 103BlackBlack
10 Piece(s) 14 Day(s) or more -3Light GrayLight Gray
1 Piece(s) 1 Day(s) 104BlackBlack
10 Piece(s) 14 Day(s) or more -4Light GrayLight Gray
10 Piece(s) 14 Day(s) or more -3.97WhiteBlack
1 Piece(s) 1 Day(s) 106BlackBlack
10 Piece(s) 14 Day(s) or more -6Light GrayLight Gray

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Union with same diameter Applicable Fluid Air
Application Standard/Mini Union, Equal Dia. Partition unions Operating Temperature(°C) 0::60
Package Specifications Regular Packaging Specifications

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)