• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

Tube Fitting Brass Straight for Sputter Resistance

Tube Fitting Brass Straight for Sputter Resistance

The main body and release ring are made of brass for superior flame retardance and sputtering resistance.

[Features]
· Available sealing rubber materials include HNBR, FKM, and NBR.
· Ideal for environments where exposure to sparks may occur.
· Release ring made of brass offers excellent flame retardance and sputter resistance.
Cover type prevents sputtering inside the fitting and dust intrusion.
· An optional spatter cover shuts out fine sparks.
· By placing a release ring cover (CS), sold separately, sparks that penetrate through the gap between the release ring and the tube can not get close

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Tube Fitting Brass - Straight Specifications

Spatter-resistant Tube Fitting Brass - Straight: related image

Tube Fitting Brass appearance

Spatter-resistant Tube Fitting Brass - Straight: related image

Tube Fitting Brass dimensional drawing (for taper pipe thread)

Spatter-resistant Tube Fitting Brass - Straight: related image

Tube Fitting Brass dimensional drawing (for M5 screw)

Usable fluids: air, water (see conditions*), heat transfer oil (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: HNBR specification: 0 to 100°C, FKM specification: 0 to 120°C (no freezing)

  • *When the fluid used is water or heat transfer oil, the following conditions must be observed.
  1. 1. When using water or heat transfer oil, make sure the surge pressure stays below the maximum operating pressure.
  2. 2. When using water or heat transfer oil, be sure to use an insert ring (see p. 858 of catalog).

Compatible Sizes

Tube sizes
Millimeter size: φ4 (diameter 4 mm), φ6 (diameter 6 mm), φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm)

Thread size
Metric thread: M5×0.8
Taper pipe thread: R1/8, R1/4, R3/8, R1/2

FormatTube Outer Diameter
φD1
Tube Outer Diameter
φD2
RφPBTube End
C1
Tube End
C2
ALHex
H
Orifice Diameter
(φmm)
Mass
(g)
KC4-M5□46M5 × 0.89.822.717.615319.7101.812
KC4-01□R1/823.782.513
KC4-02□R1/426.71120.71422
KC6-M5□68M5 × 0.811.825.519.516322.5121.817
KC6-01□R1/825.1821.1414
KC6-02□R1/429.111231423
KC6-03□R3/81222.71734
KC8-01□810R1/813.829.920.217825.914627
KC8-02□R1/428.61122.625
KC8-03□R3/828.9121732
KC10-01□1012R1/816.933.323.219.5829.317640
KC10-02□R1/41127.3839
KC10-03□R3/831.81225.546
KC10-04□R1/235.81527.62267
KC12-02□1214R1/42038.926.3231132.9218.561
KC12-03□R3/834.91228.6962
KC12-04□R1/236.91528.72274

Units: mm

  • *Taper thread type L dimensions are reference dimensions after tightening with screws.
  • *For the □ at the end of the order format, input -F if you want the FKM sealing rubber material.
Part Number
KC4-01
KC4-01-F
KC4-02
KC4-02-F
KC4-M5
KC4-M5-F
KC6-01
KC6-01-F
KC6-02
KC6-02-F
KC6-03
KC6-03-F
KC6-M5
KC6-M5-F
KC8-01
KC8-01-F
KC8-02
KC8-02-F
KC8-03
KC8-03-F
KC10-01
KC10-01-F
KC10-02
KC10-02-F
KC10-03
KC10-03-F
KC10-04
KC10-04-F
KC12-02
KC12-02-F
KC12-03
KC12-03-F
KC12-04
KC12-04-F
Part NumberVolume DiscountDays to ShipRoHSSeal Material Operating Temperature
(°C)
Applicable Tube O.D.1
(φ)
Types of connection screw 1 Nominal of Thread 1
12 Day(s) or more 10[H-NBR] HNBR0~1004R1/8
12 Day(s) or more 10[Fluororubber] FKM0~1204R1/8
12 Day(s) or more 10[H-NBR] HNBR0~1004R1/4
19 Day(s) or more -[Fluororubber] FKM0~1204R1/4
19 Day(s) or more -[H-NBR] HNBR0~1004MM5×0.8
19 Day(s) or more -[Fluororubber] FKM0~1204MM5×0.8
2 Day(s) 10[H-NBR] HNBR0~1006R1/8
12 Day(s) or more 10[Fluororubber] FKM0~1206R1/8
12 Day(s) or more 10[H-NBR] HNBR0~1006R1/4
12 Day(s) or more 10[Fluororubber] FKM0~1206R1/4
12 Day(s) or more -[H-NBR] HNBR0~1006R3/8
19 Day(s) or more -[Fluororubber] FKM0~1206R3/8
19 Day(s) or more -[H-NBR] HNBR0~1006MM5×0.8
19 Day(s) or more -[Fluororubber] FKM0~1206MM5×0.8
2 Day(s) 10[H-NBR] HNBR0~1008R1/8
12 Day(s) or more 10[Fluororubber] FKM0~1208R1/8
2 Day(s) 10[H-NBR] HNBR0~1008R1/4
12 Day(s) or more 10[Fluororubber] FKM0~1208R1/4
12 Day(s) or more 10[H-NBR] HNBR0~1008R3/8
19 Day(s) or more -[Fluororubber] FKM0~1208R3/8
12 Day(s) or more 10[H-NBR] HNBR0~10010R1/8
12 Day(s) or more 10[Fluororubber] FKM0~12010R1/8
2 Day(s) 10[H-NBR] HNBR0~10010R1/4
12 Day(s) or more 10[Fluororubber] FKM0~12010R1/4
12 Day(s) or more 10[H-NBR] HNBR0~10010R3/8
12 Day(s) or more 10[Fluororubber] FKM0~12010R3/8
12 Day(s) or more -[H-NBR] HNBR0~10010R1/2
19 Day(s) or more -[Fluororubber] FKM0~12010R1/2
12 Day(s) or more 10[H-NBR] HNBR0~10012R1/4
19 Day(s) or more -[Fluororubber] FKM0~12012R1/4
12 Day(s) or more 10[H-NBR] HNBR0~10012R3/8
12 Day(s) or more 10[Fluororubber] FKM0~12012R3/8
11 Day(s) or more -[H-NBR] HNBR0~10012R1/2
12 Day(s) or more 10[Fluororubber] FKM0~12012R1/2

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Screw Mount Direction Applicable Fluid Water / Air
Body Material Brass Application Static electricity dissipation and anti-static properties / Sputtering Resistance / Heat Resistant Screw Mounting, Direction Straight

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)