(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Corrosion-Resistant SUS316 Fitting, Straight

Corrosion-Resistant SUS316 Fitting, Straight
  • On Sale Till 31/03/2024

All metal parts and materials use SUS316 for excellent rust resistance.

PDF

Japanese Only

Tube Fitting Stainless SUS316 - Straight Specifications

Corrosion-resistant Tube Fitting Stainless SUS316 - Straight: related image

Tube Fitting Stainless SUS316 - Straight appearance

Corrosion-resistant Tube Fitting Stainless SUS316 - Straight: related image

Dimensional drawing for metric thread

Corrosion-resistant Tube Fitting Stainless SUS316 - Straight: related image

Dimensional drawing for taper pipe thread

Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: -15 to 120°C (no freezing)

  • *When the fluid used is water or other chemicals, the following conditions must be observed.
  1. 1. When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
  2. 2. When using water or other liquids, be sure to use an insert ring (see p. 858 of catalog).
  3. 3. For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.

Compatible Sizes

  • Tube Size

Millimeter size: φ4 (diameter 4 mm), φ6 (diameter 6 mm), φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm), φ16 (diameter 16 mm)

  • Thread size

Metric thread: M5×0.8
Taper pipe thread: R1/8, R1/4, R3/8, R1/2

FormatTube Outer Diameter
φD
RABLCHex
H
φPEffective Cross-Sectional Area (mm2)Mass
(g)
SSC4-M5 (4) (6)4M5 × 0.8324.421.418.4109.836
SSC4-01 (4) (5) (6)R1/8827.423.458.7
SSC6-M5 (4) (6)6M5 × 0.8325.622.619.61211.838.4
SSC6-01 (4) (5) (6)R1/8827.623.713.59.9
SSC6-02 (4) (5) (6)R1/41131.625.61413.818
SSC8-01 (4) (5) (6)8R1/8830.92721.91413.820.512
SSC8-02 (4) (5) (6)R1/41133.927.926.818
SSC10-02 (4) (5) (6)10R1/411363025.51716.827.522
SSC10-03 (4) (5) (6)R3/8123831.728.529
SSC12-03 (4) (5) (6)12R3/81239.933.627.42119.845.537
SSC12-04 (4) (5) (6)R1/21542.934.72251.855
SSC16-04 (4) (5) (6)16R1/21549.741.632.72423.779.859

Unit: mm

  • *Taper thread type L dimensions are reference dimensions after tightening with screws.
  • *For (4) in the order format, input -X if you want the fluorochemical grease specification.
  • *For (5) in the order format, input -TP if you want the sealing tape specification.
  • *For (6) in the order format, input -C if you want the clean room packaging specification.
Part Number
SSC4-01
SSC4-M5
SSC6-02
SSC6-02-TP
SSC6-M5
SSC8-01
SSC8-02
SSC10-02
SSC10-03
SSC12-03
SSC12-04
SSC16-04
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSApplicable Tube O.D.1
(φ)
Connection Screw Type 1 Nominal of Thread 1 Thread Part Seal Specification
1 Piece(s) Same day 104R1/8Standard Specifications
1 Piece(s) Same day 104MM5×0.8Standard Specifications
1 Piece(s) Same day 106R1/4Standard Specifications
1 Piece(s) Same day 106R1/4Sealing Tape Specifications
1 Piece(s) Same day 106MM5×0.8Standard Specifications
1 Piece(s) 8 Day(s) or more -8R1/8Standard Specifications
1 Piece(s) Same day 108R1/4Standard Specifications
1 Piece(s) Same day 1010R1/4Standard Specifications
1 Piece(s) Same day 1010R3/8Standard Specifications
1 Piece(s) Same day 1012R3/8Standard Specifications
1 Piece(s) 1 Day(s) -12R1/2Standard Specifications
1 Piece(s) Same day 1016R1/2Standard Specifications

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Screw Mount Direction Applicable Fluid Water / Air / Chemicals、Solvent / Mixed Gas
Body Material SUS316 Application Foods・Drug-Related / Static electricity dissipation and anti-static properties / Control the mold temperature / Heat Resistant / Cold Resistance Thread Material SUS316
Screw Mounting, Direction Straight Operating Temperature(°C) -15::120 Package Specifications Regular Packaging Specifications
Lubricant Specifications No oil specification

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)