(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Corrosion-Resistant SUS304 Fitting, Straight (PC6-01SUS)

Corrosion-Resistant SUS304 Fitting, Straight PC6-01SUS
  • On Sale Till 31/03/2024

If strength is required, optimal for chemical atmospheres.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

PC6-01SUS

Corrosion-Resistant Tube Fitting Stainless SUS304 - Straight Specifications

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight appearance

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight appearance

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing (metric thread type)

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing
(metric thread type)

Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: 0 to 60°C (no freezing)

Warning

  • *When the fluid used is water or other liquids, the following conditions must be observed.
  • When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
  • Be sure to use an insert ring when using water or other liquids.
  • For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.

Size Chart

FormatTube Outer Diameter
øD
RABLTube End
C
Hex
H
Orifice Diameter
(ømm)
Mass
(g)
PC4-M5SUS4M5 × 0.8320.117.115101.85.9
PC4-M6SUSM6 × 1421.136.2
PC4-01SUSR1/887.8
PC4-02SUSR1/41115.11415
PC6-M5SUS6M5 × 0.8322.219.217.1121.88.5
PC6-M6SUSM6 × 1423.238.8
PC6-01SUSR1/8822.718.74.68.7
PC6-02SUSR1/41124.71417
PC6-03SUSR3/81223.717.41726
PC8-01SUS8R1/8827.923.918.214615
PC8-02SUSR1/41126.620.67
PC8-03SUSR3/81223.917.61722
PC10-01SUS10R1/8830.526.520.917622
PC10-02SUSR1/41130248.520
PC10-03SUSR3/81229.523.225
PC10-04SUSR1/21530.522.32147
PC12-02SUS12R1/41136.130.123.5218.541
PC12-03SUSR3/81232.125.81134
PC12-04SUSR1/21534.125.947
PC16-03SUS16R3/81239.533.225241156
PC16-04SUSR1/21541.533.31363

Units: mm

  • *Taper thread type L dimensions are reference dimensions after tightening with screws.

Applicable Tube Size

Millimeter size: ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm), ø12 (diameter 12 mm), ø16 (diameter 16 mm)

Applicable Tube Size

Metric ThreadM5 × 0.8, M6 × 1
Taper Pipe ThreadR1/8, R1/4, R3/8, R1/2
  • *See the manufacturer's catalog for other precautions and important notes.
Part Number
PC6-01SUS
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSApplicable Tube O.D.1
(φ)
Connection Screw Type 1 Nominal of Thread 1
1 Piece(s) 8 Day(s) or more 106R1/8

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Screw Mount Direction Applicable Fluid Water / Air / Chemicals、Solvent / Mixed Gas
Body Material SUS304 Application Standard/Mini / Foods・Drug-Related Screw Mounting, Direction Straight
Operating Temperature(°C) 0::60

Please check the type/dimensions/specifications of the part PC6-01SUS in the Corrosion-Resistant SUS304 Fitting, Straight series.

Products like this...

Part Number
PC10-04SUS
PC12-02SUS
PC12-03SUS
PC6-02SUS
PC6-03SUS
PC6-M5SUS
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSApplicable Tube O.D.1
(φ)
Connection Screw Type 1 Nominal of Thread 1
1 Piece(s) 8 Day(s) or more -10R1/2
1 Piece(s) 8 Day(s) or more -12R1/4
1 Piece(s) 15 Day(s) or more -12R3/8
1 Piece(s) Same day 106R1/4
1 Piece(s) 8 Day(s) or more 106R3/8
1 Piece(s) 8 Day(s) or more -6MM5×0.8

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)