(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem.
Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS.
Untuk informasi lebih lanjut, silakan hubungi Customer Service :
TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008.
Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience. - Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Drawn Cup Needle Roller Bearing, Outer Ring (Part Numbers)
A bearing in which an outer ring is formed from a thin steel plate by precision drawing, the raceway surface is surface-hardened, and then a needle-shaped roller and a retainer are assembled.
[Features]
・ It has the smallest cross-sectional height of any bearing with an outer ring, enabling space reduction and cost savings.
・ Compact design is possible with the shaft directly as the raceway surface without using the inner ring.
・ The outer ring has a structure in which the needle roller and the retainer are not separated.
・ Retaining rings are not required for fixing in the axial direction by simply press-fitting into a rigid housing with an appropriate fit.
[Applications]
・ Heavy load, high speed, gearbox for automobiles, etc.
・ Steel equipment, mining / construction machinery, machine tools.
(i)Caution
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Japanese Only
Part Number
Configured Part Number is shown.
Drawing
HK type, HMK type (Open-ended type)
HK, ZWD type (Open-ended type)
BK type (Closed end type)
BK ‥ ZWD type (Closed end type)
Product features details
Shell-type needle roller bearings that can reduce space and cost
It is a bearing in which an outer ring is formed from a thin steel plate by precision drawing, the raceway surface is surface-hardened, and then a needle-shaped roller and a retainer are assembled (as for the part numbers with "M" in the suffix, they are heat treated after assembling). It has the smallest cross-sectional height of any bearing with an outer ring, enabling space reduction and cost savings.
Usually, a design is taken in which the shaft is directly used as the raceway surface without using the inner ring. The outer ring has a structure in which the needle-shaped roller and the retainers are not separated, and the bearing is easy to handle because it does not require a retaining ring to fix it in the axial direction, just by press-fitting it into a rigid housing with an appropriate fit.
Type, structure, and features of shell needle roller bearings
| Type | Compatible shaft diameter (mm) | Nominal Number | Composition and dimensions | Note | ||
|---|---|---|---|---|---|---|
| HK (HK・・T2) | Standard Series | Open End | ø3 to ø50 | HK0609T2 | Diameter of Inscribed Circle: ø6 Width dimensions: 9 T2: Resin retainer | Since the suffix T2 uses a polyamide resin molding retainer, the allowable temperature should be 120°C, and 100°C or less for continuous use. Premium shell bearings have F in the suffix. See CATNO.3029 (Premium Shell Bearing) for details. Those with an M in the suffix are heat-treated products after assembly. (Pre-vent specifications) |
| HK・・L | Open End One-sided seal | ø12 to ø50 | HK2018L/3AS | Diameter of Inscribed Circle: ø20 Width dimensions: 18 L: One-sided seal 3AS: Grease | The seal type (tailing symbol: L or LL) with a built-in synthetic rubber sealing seal on one side or both sides has lithium soap-based grease sealed inside. To prevent deterioration of the seal and grease, the operating temperature should be -20 to 120°C, and within 100°C for continuous use. This type has a shorter roller length and a smaller rated load than the open type with the same dimensions. | |
| HK・・LL | Open End Double-sided seal | ø12 to ø50 | HK2020LL/3AS | Diameter of Inscribed Circle: ø20 Width dimensions: 20 LL: Double-sided seal 3AS: Grease | ||
| HK・・ZWD | Open End Double row type | ø15 to ø30 | HK2030ZWD | Diameter of Inscribed Circle: ø20 Width dimensions: 30 ZW: Retainer double row D: Outer ring lubrication hole | This type has a lubrication hole in the outer ring. | |
| HMK (HMK・・T2) | Open End | ø8 to ø50 | HMK2015 | Diameter of Inscribed Circle: ø20 Width dimensions: 15 | Since the suffix T2 uses a polyamide resin molding retainer, the allowable temperature should be 120°C, and 100°C or less for continuous use. | |
| HMK・・L | Open End One-sided seal | ø8 to ø50 | HMK2018L/3AS | Diameter of Inscribed Circle: ø20 Width dimensions: 18 L: One-sided seal 3AS: Grease | The seal type (tailing symbol: L or LL) with a built-in synthetic rubber sealing seal on one side or both sides has lithium soap-based grease sealed inside. To prevent deterioration of the seal and grease, the operating temperature should be -20 to 120°C, and within 100°C for continuous use. This type has a shorter roller length and a smaller rated load than the open type with the same dimensions. | |
| HMK・・LL | Open End Double-sided seal | ø8 to ø50 | HMK2021LL/3AS | Diameter of Inscribed Circle: ø20 Width dimensions: 20 LL: Double-sided seal 3AS: Grease | ||
| HMK・・ZWD | Open End Double row type | ø38 to ø50 | HK3845ZWD | Diameter of Inscribed Circle: ø38 Width dimensions: 45 ZW: Retainer double row D: Outer ring lubrication hole | This type has a lubrication hole in the outer ring. | |
| BK (BK・・T2) | Closed End | ø3 to ø50 | BK2020C | Diameter of Inscribed Circle: ø20 Width dimensions: 20 C: Welding retainer | Since the suffix T2 uses a polyamide resin molding retainer, the allowable temperature should be 120°C, and 100°C or less for continuous use. | |
| BK・・L | Closed End One-sided seal | ø12 to ø50 | BK2018L/3AS | Diameter of Inscribed Circle: ø20 Width dimensions: 18 L: One-sided seal 3AS: Grease | This seal type (suffix: L) has lithium soap-based grease sealed inside. To prevent deterioration of the seal and grease, the operating temperature should be -20 to 120°C, and continuous use should be within 100°C. | |
| BK・・ZWD | Closed End Double row type | ø15 to ø30 | BK2030ZWD | Diameter of Inscribed Circle: ø20 Width dimensions: 30 ZW: Retainer double row D: Outer ring lubrication hole | This type has a lubrication hole in the outer ring. | |
About allowable rotational speed
The permissible rotational speed is the permissible rotational speed that can be achieved based on the following assumptions.
- Use under conditions where an appropriate amount of grease recommended by NTN is sealed, and the heat generated by sufficient familiar operation, cooling of the outer cylinder, etc., is removed.
- Use with constant pressure preload.
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Load Direction | Inner Dia. d (Ø) | Outer Dia. D (Ø) | Width B (mm) | Number of Raceway Ring Rows | Size Standards | Retainer Type | Basic Load Rating: Dynamic Load (N) | Sealing Structure | Lubricant | Format symbol | Holder Symbol | Specifications | Revolution Frequency (rpm) | Series | Case hardening (outer ring only) | Outer ring oil hole | Premium shell bearing | Post-assembly heat treatment (pre-bent type) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | Same day | - | Radial | 25 | 33 | 20 | Single Row | Metric System | - | 21800 | NA | NA | HMK | - | Open End | 6500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Radial | 25 | 33 | 23 | Single Row | Metric System | - | 21800 | One-sided Seal Type | NA | HMK | - | Open End One-sided Seal | 6500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | Same day | - | Radial | 25 | 33 | 25 | Single Row | Metric System | - | 26700 | NA | NA | HMK | - | Open End | 6500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | - | - | - | - | Single Row | Metric System | - | 26400 | Double-sided seal type | Available | HMK | - | Open End Double-sided Seal | 6500 | Heavy duty | N/A | N/A | N/A | N/A | ||
| 1 Piece(s) | Same day | - | Radial | 25 | 33 | 30 | Single Row | Metric System | - | 32500 | NA | NA | HMK | - | Open End | 6500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 19 Day(s) or more | 10 | Radial | 26 | 34 | 16 | Single Row | Metric System | - | 17100 | NA | NA | HMK | - | Open End | 6000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 28 | 37 | 20 | Single Row | Metric System | - | 23600 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Radial | 28 | 37 | 30 | Single Row | Metric System | - | 35000 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 29 | 38 | 20 | Single Row | Metric System | - | 24600 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 29 | 38 | 30 | Single Row | Metric System | - | 34500 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 30 | 40 | 13 | Single Row | Metric System | - | 14100 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 30 | 40 | 15 | Single Row | Metric System | - | 17100 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | Same day | - | Radial | 30 | 40 | 20 | Single Row | Metric System | - | 24200 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | Same day | - | Radial | 30 | 40 | 25 | Single Row | Metric System | - | 31000 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 30 | 40 | 26 | Single Row | Metric System | - | 24200 | Double-sided Seal Type | Available | HMK | - | Open End Double-sided Seal | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | - | - | - | - | Single Row | Metric System | - | - | One-sided Seal Type | Available | HMK | - | Open End One-sided Seal | 5500 | Heavy duty | N/A | N/A | N/A | N/A | ||
| 1 Piece(s) | Same day | - | Radial | 30 | 40 | 30 | Single Row | Metric System | - | 36000 | NA | NA | HMK | - | Open End | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Radial | 30 | 40 | 31 | Single Row | Metric System | - | 31000 | Double-sided Seal Type | Available | HMK | - | Open End Double-sided Seal | 5500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Radial | 32 | 42 | 20 | Single Row | Metric System | - | 27500 | NA | NA | HMK | - | Open End | 7500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 32 | 42 | 23 | Single Row | Metric System | - | 27500 | One-sided Seal Type | NA | HMK | - | Open End One-sided Seal | 5000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | - | - | - | - | Single Row | Metric System | - | 27500 | One-sided Seal Type | Available | HMK | - | Open End One-sided Seal | 5000 | Heavy duty | N/A | N/A | N/A | N/A | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 32 | 42 | 30 | Single Row | Metric System | - | 41500 | NA | NA | HMK | - | Open End | 7500 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 35 | 45 | 12 | Single Row | Metric System | - | 14900 | NA | NA | HMK | - | Open End | 4700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | - | Radial | 35 | 45 | 15 | Single Row | Metric System | - | 20200 | NA | NA | HMK | - | Open End | 4700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | - | Radial | 35 | 45 | 20 | Single Row | Metric System | - | 28400 | NA | NA | HMK | - | Open End | 4700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 19 Day(s) or more | - | Radial | 35 | 45 | 25 | Single Row | Metric System | - | 36000 | NA | NA | HMK | - | Open End | 4700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 19 Day(s) or more | 10 | Radial | 35 | 45 | 28 | Single Row | Metric System | - | 36000 | One-sided Seal Type | Available | HMK | - | Open End One-sided Seal | 4600 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 35 | 45 | 30 | Single Row | Metric System | - | 43000 | NA | NA | HMK | - | Open End | 4700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 35 | 45 | 31 | Single Row | Metric System | - | 36000 | Double-sided Seal Type | Available | HMK | - | Open End Double-sided Seal | 4600 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 37 | 47 | 20 | Single Row | Metric System | - | 29300 | NA | NA | HMK | - | Open End | 4300 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 38 | 48 | 20 | Single Row | Metric System | - | 30500 | NA | NA | HMK | - | Open End | 4300 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 38 | 48 | 25 | Single Row | Metric System | - | 38500 | NA | NA | HMK | - | Open End | 4300 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 38 | 48 | 30 | Single Row | Metric System | - | 46000 | NA | NA | HMK | - | Open End | 4300 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | Same day | - | Radial | 40 | 50 | 15 | Single Row | Metric System | - | 23100 | NA | NA | HMK | - | Open End | 4000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 40 | 50 | 20 | Single Row | Metric System | - | 32500 | NA | NA | HMK | - | Open End | 6000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 12 Day(s) or more | 10 | Radial | 40 | 50 | 25 | Single Row | Metric System | - | 41000 | NA | NA | HMK | - | Open End | 6000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | Same day | - | Radial | 40 | 50 | 30 | Single Row | Metric System | - | 49000 | NA | NA | HMK | - | Open End | 4000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Radial | 40 | 50 | 31 | Single Row | Metric System | - | 41000 | Double-sided Seal Type | Available | HMK | - | Open End Double-sided Seal | 4000 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | - | Radial | 40 | 50 | 40 | Double Row | Metric System | - | 58500 | NA | NA | HMK | - | Open End Multiple-Row Type | 4000 | Heavy Load | NA | Available | NA | NA | ||
| 1 Piece(s) | 16 Day(s) or more | - | Radial | 45 | 55 | 20 | Single Row | Metric System | - | 33000 | NA | NA | HMK | - | Open End | 3700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 19 Day(s) or more | - | Radial | 45 | 55 | 25 | Single Row | Metric System | - | 41500 | NA | NA | HMK | - | Open End | 3700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 45 | 55 | 30 | Single Row | Metric System | - | 49500 | NA | NA | HMK | - | Open End | 3700 | Heavy Load | NA | NA | NA | NA | ||
| 1 Piece(s) | 11 Day(s) or more | - | Radial | 45 | 55 | 40 | Double Row | Metric System | - | 59500 | NA | NA | HMK | - | Open End Multiple-Row Type | 3700 | Heavy Load | NA | Available | NA | NA | ||
| 1 Piece(s) | 15 Day(s) or more | 10 | Radial | 50 | 62 | 15 | Single Row | Metric System | - | 25900 | NA | NA | HMK | - | Open End | 4800 | Heavy Load | NA | NA | NA | NA |
Loading...
Basic Information
| Raceway Ring Shape | Needle Roller | Outer Ring | With Outer Ring | Inner/Outer Ring Material | Steel |
|---|---|---|---|---|---|
| Specifications/Environment | Standard | Rolling Element Material | Steel | Outer Ring Type | Flat |
Specification/Dimensions
-
Load Direction
- Radial
- Thrust
-
Inner Dia. d(Ø)
-
Outer Dia. D(Ø)
-
Width B(mm)
-
Number of Raceway Ring Rows
- Single Row
- Double Row
-
Size Standards
- Metric System
- Inch Base
-
Retainer Type
- Resin Forming
- Weld Shape
-
Sealing Structure
- Double-sided Seal Type
- Double-sided seal type
- NA
- One-sided Seal Type
-
Lubricant
- Available
- N/A
- NA
-
Format symbol
-
Holder Symbol
- T2 (Polyamide Resin Forming Holder)
- C (Weld Holder)
-
Specifications
- Closed End
- Open End
- Open End Double-sided Seal
- Open End Multiple-Row Type
- Open End One-sided Seal
-
Revolution Frequency(rpm)
-
Series
- Heavy Load
- Heavy duty
- Inch
- Standard
-
Case hardening (outer ring only)
- Case hardening
- N/A
- NA
-
Outer ring oil hole
- Available
- N/A
- NA
-
Premium shell bearing
- Available
- N/A
- NA
-
Post-assembly heat treatment (pre-bent type)
- Available
- N/A
- NA
-
type
- 7E-HMK
- 7□□
- BK
- DCL
- HK
- HMK
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
- 16 Day(s) or Less
- 19 Day(s) or Less
- 20 Day(s) or Less
- 22 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy