• Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 7:00 sampai dengan 21:00 pada tanggal 27/10/2019. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 to 21:00 (WIB) 27/10/2019. We apologize for the inconvenience.

Level Indicator (LR-E, LR-P, LT-P)

Level Indicator (LR-E, LR-P, LT-P)

The LR-E type comes with a level sensor that can automatically control the amount of oil, while the LR-P and LT-P types feature a protector to help mitigate damage caused by impacts.

[Features]
· LR-E: with sensor.
· LR-P: with protector.
· LT-P: with protector and thermometer.
· Oil is injected into the indicator through two bolts.
· Resin material has a high impact strength and will not discolor under light.
· Moreover, it also features resistance against common types of chemical, including oil based types.
· Since the dial can be removed, 'max' and 'min' can be printed on after purchase.
· The lens effect generated by the curved front makes the characters/letters easy to read, even from the side.
· Is completely sealed, ensuring no oil is able to leak out.

PDF

Oil Level Gauge With Easy-To-See Letters

LR-E external appearance (with sensor)

LR-E external appearance (with sensor)

LR-P external appearance (with protector, level plate)

LR-P external appearance (with protector, level plate)

LT-P external appearance (with protector, thermometer)

LT-P external appearance (with protector, thermometer)

Dimensional Drawing

Indicator dimensional drawing

Indicator dimensional drawing

LR-E dimensional drawing (with sensor)

LR-E dimensional drawing (with sensor)

LR-P dimensional drawing (with protector, level plate)

LR-P dimensional drawing (with protector, level plate)

LT-P dimensional drawing (with protector, thermometer)

LT-P dimensional drawing (with protector, thermometer)

Technical Data

Mounting

Mounting
Bolt maximum tightening torque: 12 N·m

Connection method

Connection method

  1. 1. Loosen the bottom screw and remove the connector from the main body.
  2. 2. From the connector, pull out the contact holder and loosen the plug.
  3. 3. Pass the cable through the plug and connector, and connect to terminals 1 and 2 of the connector holder (no other connections are required).
  4. 4. Return the contact holder to the original position of the connector and tighten the mounting screw to the body.
  5. 5. Upon tightening the plug, wiring connection to the indicator is complete.

Notes
Avoid use with water tanks, as the resin absorbs the water and expands.
This product does not have pressure resistance specifications.
Avoid contact with alcohol-based chemicals and cleaning solutions.
When used for phosphates, replace the seal with the appropriate item.
Do not use in such a way that oil directly contacts the level plate, as it may cause twisting and deformation to occur.

Part Number
LR-127E
LR-127P
LT-127P
Part NumberVolume DiscountDays to ShipRoHSAdditional Functions for Level Visibility Other Added Functions Thermometer Display Range
(℃)
11 Day(s) or more 10SensorNoNo Thermometer
Same day 10LineWith protectorNo Thermometer
13 Day(s) or more 10NoWith Thermometer / With protector0~100

Loading...

  1. 1

Basic Information

Type Rectangle Elongated Type Standard Elongated Type, Mounting Hole Pitch(mm) 127
Rectangle Nominal of Thread M M12X1.75 Body Material Special Transparent Polyamide Seal Portion Material Nitrile Rubber (NBR)
Maximum Operating Temperature(℃) 90

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)