GTR gear motor Double shaft speed reducer (0.1kW to 2.2kW) Parallel shaft

Brand :

NISSEI

Caution

The product images are representative only. Specifications may vary by part number, including shape and color.

Product Description

[Features] Double shaft speed reducer with the speed reducer of the GTR gear motor separated as an independent unit.

Product Specification

Equivalent 4P Motor Capacity		Equivalent to 0.1 kW to 2.2 kW
Speed Reducer Section	Reduction Method	Helical Gear
	Lubrication method	Grease lubrication (maintenance free)
	Output shaft	new JIS key (JIS B 1301-1996 standard type) *Key material is included.
	Output shaft material	S43C
	Case material	Die-cast aluminum (frame 50 is cast iron)
Ambient conditions	Ambient temperature	-10°C to 40°C
	Ambient humidity	85% or less (no condensation)
	High	1,000 m or less
	Environment	No Corrosive or Explosive Gases, Steam, or Similar Substances in Surroundings. A well-ventilated location free from dust.
	Installation Location	Indoor
Painting	Painting Method	Anion painting, acrylic paint
Painting	Coating Color	Gray (Munsell value: 9B6/0.5)
Mounting Direction		No restrictions on installation angle, such as horizontal, vertical, or inclined

Specifications Table

Equivalent 4P Motor Capacity	Frame Number	Reduction ratio	actual reduction ratio	Output shaft allowable torque Input (1,500 r/min)		Allowable O.H.L.				Approximate Mass
				Output shaft allowable torque Input (1,500 r/min)		N		kgf		Approximate Mass
				N⋅m	kgf·m	Input shaft	Output shaft	Input shaft	Output shaft	G3L	G3F	G3K
0.1 kW	18	1/5	33/164	3	0.31	176	770	18	78	2.5 kg	3 kg	3 kg
		1/10	77/779	6.1	0.62		1,140		116
		1/15	119/1804	9.1	0.93		1,270		129
		1/20	49/984	12	1.2		1,530		156
		1/25	28/697	15	1.5		1,650		168
		1/30	35/1066	19	1.9		1,780		181
		1/40	35/1404	24	2.4		1,910		194
		1/50	7/351	29	3		2,040		208
	22	1/60	11/684	35	3.6	176	2,800	18	285	3.5 kg	4 kg	4 kg
		1/80	21/1634	47	4.8		3,180		324
		1/100	7/684	59	6		3,180		324
		1/120	147/17974	71	7.2		3,180		324
		1/160	21/3268	94	9.6		3,180		324
		1/200	21/4085	117	11.9		3,180		324
	28	1/300	221/65190	157	16	176	3,430	18	350	6.5 kg	7 kg	7 kg
		1/375	187/68370	196	20		3,430		350
		1/450	1183/521520	235	24		3,430		350
	32	1/600	147/88192	313	31.9	176	5,880	18	600	9.5 kg	10 kg	10 kg
		1/750	49/36464	391	39.9		5,880		600
		*1/900	62/57063	431	44		5,880		600
		*1/1200	46/55195	431	44		5,880		600
0.2 kW	18	1/5	33/164	6.1	0.62	196	770	20	78	2.5 kg	3 kg	3 kg
		1/10	77/779	11.8	1.2		1,140		116
		1/15	119/1804	18.6	1.9		1,270		129
		1/20	49/984	24.5	2.5		1,450		147
		1/25	28/697	30.4	3.1		1,550		158
	22	1/30	7/216	36.3	3.7	196	2,280	20	232	3.5 kg	4 kg	4 kg
		1/40	91/3600	47	4.8		2,410		245
		1/50	11/540	58.8	6		2,540		259
		1/60	637/39600	70.6	7.2		2,800		285
		1/80	91/7200	94.1	9.6		3,000		306
		*1/100	11/1080	97	9.9		3,180		324
	28	1/100	13/1353	117	11.9	196	3,690	20	376	5.5 kg	6 kg	6 kg
		1/120	91/11000	140	14.3		4,320		440
		1/160	1/165	187	19.1		4,450		454
		1/200	7/1375	234	23.9		4,450		454
	32	1/300	91/27348	313	31.9	196	5,880	20	600	9.5 kg	10 kg	10 kg
		1/375	77/28620	391	39.9		5,880		600
		1/450	91/41022	431	44		5,880		600
	40	1/600	9/5300	626	63.9	196	7,060	20	720	16k	17.5k	-
		*1/750	62/46427	764	78		7,060		720
		*1/900	23/21259	764	78		7,060		720
		*1/1200	9/10600	764	78		7,060		720
0.4 kW	22	1/5	7/34	12	1.2	245	1,140	25	116	4 kg	4.5 kg	4.5 kg
		1/10	7/68	25	2.5		1,530		156
		1/15	49/748	36	3.7		1,780		181
		1/20	7/136	48	4.9		1,910		194
		1/25	7/170	61	6.2		2,050		209
	28	1/30	1/30	73	7.4	245	3,310	25	337	6 kg	6.5 kg	6.5 kg
		1/40	221/8610	94	9.6		3,690		376
		1/50	187/9030	117	11.9		4,080		416
		1/60	169/9840	140	14.3		4,450		454
		1/80	65/5166	187	19.1		4,450		454
		*1/100	55/5418	193	19.7		4,450		454
	32	1/100	7/688	234	23.9	245	6,370	25	650	9 kg	9.5 kg	9.5 kg
		1/120	77/9360	281	28.7		7,640		779
		1/160	21/3328	374	38.2		7,640		779
		1/200	189/38272	431	44		7,640		779
	40	1/300	7/2160	626	63.9	245	7,060	25	720	17.5 kg	19 kg	-
		*1/375	77/29328	764	78		7,060		720
		*1/450	49/21600	764	78		7,060		720
	50	*1/600	57/35360	1,225	125	245	9,800	25	1,000	47 kg	52 kg	-
		*1/750	25/19448	1,225	125		9,800		1,000
		*1/900	5/4338	1,225	125		9,800		1,000
		*1/1200	33/40664	1,225	125		9,800		1,000
0.75 kW	28	1/5	91/459	23	2.3	294	1,650	30	168	6 kg	6.5 kg	6.5 kg
		1/10	1/10	45	4.6		2,280		232
		1/15	91/1360	68	6.9		2,800		285
		1/20	5/102	91	9.3		3,050		311
		1/25	7/170	114	11.6		3,180		324
	32	1/30	3/92	136	13.9	294	5,220	30	532	9.5 kg	10 kg	10 kg
		1/40	13/516	175	17.9		5,470		558
		1/50	11/540	220	22.4		5,780		589
		1/60	13/774	264	26.9		6,080		620
		1/80	13/1032	351	35.8		6,180		630
		*1/100	11/1080	362	36.9		6,770		690
	40	1/100	91/9000	439	44.8	294	9,170	30	935	16 kg	17.5 kg	-
		1/120	77/9400	527	53.8		9,170		935
		1/160	9/1400	703	71.7		9,170		935
		1/200	9/1750	764	78		9,170		935
	50	1/300	211/62013	1,176	120	294	9,800	30	1,000	47.5 kg	52.5 kg	-
		*1/375	94/36103	1,225	125		9,800		1,000
		*1/450	65/29167	1,225	125		9,800		1,000
1.5 kW	32	1/5	1/5	45	4.6	343	2,280	35	232	10 kg	10.5 kg	10.5 kg
		1/10	1/10	91	9.3		3,180		324
		1/15	1/15	136	13.9		3,690		376
		1/20	1/20	181	18.5		4,190		427
		1/25	9/230	226	23.1		4,410		450
	40	1/30	1/30	272	27.8	343	6,600	35	673	17 kg	18.5 kg	-
		1/40	13/540	351	35.8		6,960		710
		1/50	11/564	439	44.8		6,960		710
		1/60	91/5400	527	53.8		7,210		735
		1/80	13/1080	703	71.7		7,400		755
		*1/100	11/1128	724	73.9		7,400		755
	50	1/100	25/2618	878	89.6	343	12,500	35	1,275	46.5 kg	51.5 kg	-
		1/120	77/8993	1,060	108		12,500		1,275
		*1/160	33/5474	1,230	125		12,500		1,275
		*1/200	30/5831	1,230	125		12,500		1,275
2.2 kW	40	1/5	7/36	66	6.7	392	2,800	40	285	16.5 kg	18 kg	-
		1/10	7/72	131	13.4		4,080		416
		1/15	49/720	197	20.1		4,580		467
		1/20	7/144	264	26.9		5,220		532
		1/25	7/180	329	33.6		6,110		623
	50	1/30	5/154	395	40.3	392	9,040	40	922	46.5 kg	51.5 kg	-
		1/40	399/15,488	499	50.9		9,420		961
		1/50	399/20240	623	63.6		10,000		1,020
		1/60	49/2904	748	76.3		10,000		1,020
		1/80	49/3795	1,000	102		10,100		1,030
		*1/100	21/2116	1,230	125		10,100		1,030

(Note) 1. The allowable O.H.L. value is measured at the center position of the output shaft.
2. The * symbol indicates a torque-limited model. Please pay special attention to the allowable torque in the performance table.