(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Index Plunger (Nose-Lock Type) (NDXN-L-ASUS)

Index Plunger (Nose-Lock Type) (NDXN-L-ASUS)
  • On Sale Till 31/03/2024

A nose-lock type for holding the pin in its retracted position. Made entirely from stainless steel, this product is optimal for places requiring rust prevention and clean environments. Available in two nose types: hardened and non-hardened.

[Features]
· Hand-operated spring plungers. The nose is easily retracted by pulling on the knob. By releasing the knob, the built-in spring returns the nose to its original position.
· The nose-lock locks the nose in its retracted position by rotating the knob 90 degrees while it is extended.

PDF

All Stainless Steel

NDXN-L-ASUS external appearance

NDXN-L-ASUS external appearance

Dimensional drawing of NDXN-ASUS, NDXN-A-ASUS (single nut)

Dimensional drawing of NDXN-ASUS, NDXN-A-ASUS (single nut)

Dimensional drawing of NDXN-W-ASUS, NDXN-AW-ASUS (single nut)

Dimensional drawing of NDXN-W-ASUS, NDXN-AW-ASUS (single nut)

Sized
(-0.02
-0.04)
SML1ADLW1T1WTBLoad (N)
Min To Max
NDXN-ASUS
NDXN-W-ASUS
NDXN-A-ASUS
NDXN-AW-ASUS
633.5M6 × 0.75120.81434.58510324.5 to 9
844M8 × 115118431061346 to 12
1055M10 × 1171.321501371755 to 12
1266M12 × 1.5201.8255914819636 to 14
1688M16 × 1.5262.33377191024815 to 35
201010M20 × 1.5282.6832212301015 to 34

Materials

TypeMain BodyKnobCoil SpringNose
NDXN-ASUS
NDXN-W-ASUS
SUS303SUS303
Electrolytic polishing
SUS302WPASUS420
HRC53 to 55
NDXN-A-ASUS
NDXN-AW-ASUS
SUS303
Part Number
NDXN6AL-ASUS
NDXN6ALW-ASUS
NDXN6L-ASUS
NDXN6LW-ASUS
NDXN8AL-ASUS
NDXN8ALW-ASUS
NDXN8L-ASUS
NDXN8LW-ASUS
NDXN10AL-ASUS
NDXN10ALW-ASUS
NDXN10L-ASUS
NDXN10LW-ASUS
NDXN12AL-ASUS
NDXN12ALW-ASUS
NDXN12L-ASUS
NDXN12LW-ASUS
NDXN16AL-ASUS
NDXN16ALW-ASUS
NDXN16L-ASUS
NDXN16LW-ASUS
NDXN20AL-ASUS
NDXN20ALW-ASUS
NDXN20L-ASUS
NDXN20LW-ASUS
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSShaft O.D.
(mm)
d
(Ø)
S
(mm)
L
(mm)
Tip heat treatment Nut
1 Piece(s) 16 Day(s) or more 10633.531.5NoSingle nut
1 Piece(s) 16 Day(s) or more 10633.531.5NoDouble Nut
1 Piece(s) 16 Day(s) or more 10633.531.5[Hardening] Quenching and TemperingSingle nut
1 Piece(s) Same day 10633.531.5[Hardening] Quenching and TemperingDouble Nut
1 Piece(s) 16 Day(s) or more 1084438.5NoSingle nut
1 Piece(s) 16 Day(s) or more 1084438.5NoDouble Nut
1 Piece(s) 16 Day(s) or more 1084438.5[Hardening] Quenching and TemperingSingle nut
1 Piece(s) Same day 1084438.5[Hardening] Quenching and TemperingDouble Nut
1 Piece(s) 16 Day(s) or more 10105543.5NoSingle nut
1 Piece(s) 16 Day(s) or more 10105543.5NoDouble Nut
1 Piece(s) 16 Day(s) or more 10105543.5[Hardening] Quenching and TemperingSingle nut
1 Piece(s) Same day 10105543.5[Hardening] Quenching and TemperingDouble Nut
1 Piece(s) 16 Day(s) or more 10126651.7NoSingle nut
1 Piece(s) 38 Day(s) or more 10126651.7NoDouble Nut
1 Piece(s) 16 Day(s) or more 10126651.7[Hardening] Quenching and TemperingSingle nut
1 Piece(s) 12 Day(s) or more 10126651.7[Hardening] Quenching and TemperingDouble Nut
1 Piece(s) 16 Day(s) or more 10168868NoSingle nut
1 Piece(s) 16 Day(s) or more 10168868NoDouble Nut
1 Piece(s) 14 Day(s) or more 10168868[Hardening] Quenching and TemperingSingle nut
1 Piece(s) 14 Day(s) or more 10168868[Hardening] Quenching and TemperingDouble Nut
1 Piece(s) 16 Day(s) or more 1020101074NoSingle nut
1 Piece(s) 16 Day(s) or more 1020101074NoDouble Nut
1 Piece(s) 16 Day(s) or more 1020101074[Hardening] Quenching and TemperingSingle nut
1 Piece(s) 16 Day(s) or more 1020101074[Hardening] Quenching and TemperingDouble Nut

Loading...

  1. 1
 

Basic Information

Types Standard Locking Mechanism Nose Lock Mounting Method Screw-In
Body Material Stainless Steel Overall Length Standard Tip material Stainless Steel
All Stainless Applicable Tip surface treatment No Operation nob (or lever) Presence
Main Body Surface Treatment No

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)